IOPSP(4) BSD Programmer's Manual IOPSP(4)
iopsp - I2O SCSI port driver
iopsp* at iop? tid ? scsibus* at iopsp?
The iopsp driver provides support for I2O SCSI bus adapter ports and child peripherals. IOPs present each child peripheral attached to a bus adapter port as an individual device. In order to present the appearance of a bus, the iopsp driver groups child peripherals by controlling port. On IOPs containing a SCSI port and block or tape driver modules, some SCSI devices may not be directly accessible. For each inaccessible dev- ice, a message will be displayed during configuration. For example: iopsp0: target 0,0 (tid 70): in use by tid 47 Such devices will usually be indirectly accessible as block devices, ei- ther individually or as part of an array. For accessing these, there is the ioprbs driver.
intro(4), iop(4), ioprbs(4), scsibus(4)
The iopsp driver first appeared in NetBSD 1.6, OpenBSD support was added in OpenBSD 3.0.
The iopsp driver was written by Andrew Doran <firstname.lastname@example.org> and ported to OpenBSD 3.0 by Niklas Hallqvist <email@example.com> and Michael Shalayeff <firstname.lastname@example.org>. MirOS BSD #10-current November 8, 1999 1
Generated on 2016-01-17 04:51:01 by $MirOS: src/scripts/roff2htm,v 1.82 2016/01/02 20:05:08 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002–2016 The MirOS Project, Germany.
This product includes material provided by mirabilos.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.