ROUTED(8) BSD System Manager's Manual ROUTED(8)
routed - network RIP and router discovery routing daemon
routed [-Adghmqst] [-F net[/mask][,metric]] [-P parms] [-T tracefile]
routed is a daemon invoked at boot time to manage the network routing tables. It uses Routing Information Protocol Version 1 (RFC 1058), RIPv2 (RFC 1723), and Internet Router Discovery Protocol (RFC 1256) to maintain the kernel routing table. It listens on a udp(4) socket for the route(8) service (see services(5)) for Routing Information Protocol packets. It also sends and receives mul- ticast Router Discovery ICMP messages. If the host is a router, routed periodically supplies copies of its routing tables to any directly con- nected hosts and networks. It also advertises or solicits default routes using Router Discovery ICMP messages. When started (or when a network interface is later turned on), routed uses an AF_ROUTE address family facility to find those directly connected interfaces configured into the system and marked 'up'. It adds necessary routes for the interfaces to the kernel routing table. Soon after being first started, and provided there is at least one interface on which RIP has not been disabled, routed deletes all pre-existing non-static routes in the kernel table, except those marked with either the RTF_PROTO1 or RTF_PROTO2 flag (see route(4)), i.e. routes that have been inserted by bgpd(8) or ospfd(8). Static routes in the kernel table are preserved and included in RIP responses if they have a valid RIP metric (see route(8)). If more than one interface is present (not counting the loopback inter- face), it is assumed that the host should forward packets among the con- nected networks. After transmitting a RIP request and Router Discovery Advertisements or Solicitations on a new interface, the daemon enters a loop, listening for RIP request and response and Router Discover packets from other hosts. When a request packet is received, routed formulates a reply based on the information maintained in its internal tables. The response packet gen- erated contains a list of known routes, each marked with a "hop count" metric (a count of 16 or greater is considered "infinite"). Advertised metrics reflect the metric associated with an interface (see ifconfig(8)), so setting the metric on an interface is an effective way to steer traffic. Responses do not contain routes with a first hop on the requesting net- work to implement in part split-horizon. Requests from query programs such as rtquery(8) are answered with the complete table. The routing table maintained by the daemon includes space for several gateways for each destination to speed recovery from a failing router. RIP response packets received are used to update the routing tables pro- vided they are from one of the several currently recognized gateways or advertise a better metric than at least one of the existing gateways. When an update is applied, routed records the change in its own tables and updates the kernel routing table if the best route to the destination changes. The change in the kernel routing table is reflected in the next batch of response packets sent. If the next response is not scheduled for a while, a flash update response containing only recently changed routes is sent. In addition to processing incoming packets, routed also periodically checks the routing table entries. If an entry has not been updated for 3 minutes, the entry's metric is set to infinity and marked for deletion. Deletions are delayed until the route has been advertised with an infin- ite metric to ensure the invalidation is propagated throughout the local internet. This is a form of poison reverse. Routes in the kernel table that are added or changed as a result of ICMP Redirect messages are deleted after a while to minimize black-holes. When a TCP connection suffers a timeout, the kernel tells routed, which deletes all redirected routes through the gateway involved, advances the age of all RIP routes through the gateway to allow an alternate to be chosen, and advances the age of any relevant Router Discovery Protocol default routes. Hosts acting as internetwork routers gratuitously supply their routing tables every 30 seconds to all directly connected hosts and networks. These RIP responses are sent to the broadcast address on nets that sup- port broadcasting, to the destination address on point-to-point links, and to the router's own address on other networks. If RIPv2 is enabled, multicast packets are sent on interfaces that support multicasting. If no response is received on a remote interface, if there are errors while sending responses, or if there are more errors than input or output (see netstat(1)), then the cable or some other part of the interface is assumed to be disconnected or broken, and routes are adjusted appropri- ately. The Internet Router Discovery Protocol is handled similarly. When the daemon is supplying RIP routes, it also listens for Router Discovery Sol- icitations and sends Advertisements. When it is quiet and only listening to other RIP routers, it sends Solicitations and listens for Advertise- ments. If it receives a good Advertisement, it stops listening for broad- cast or multicast RIP responses. It tracks several advertising routers to speed recovery when the currently chosen router dies. If all discovered routers disappear, the daemon resumes listening to RIP responses. While using Router Discovery (which happens by default when the system has a single network interface and a Router Discover Advertisement is re- ceived), there is a single default route and a variable number of redirected host routes in the kernel table. The Router Discover standard requires that advertisements have a default "lifetime" of 30 minutes. That means should something happen, a client can be without a good route for 30 minutes. It is a good idea to reduce the default to 45 seconds using -P rdisc_interval=45 on the command line or rdisc_interval=45 in the /etc/gateways file. See the pm_rdisc facility described below to support "legacy" systems that can handle neither RIPv2 nor Router Discovery. By default, neither Router Discovery advertisements nor solicitations are sent over point to point links (e.g. PPP). The options are as follows: -A Drop all RIPv2 packets carrying authentication information. This option is required for conformance with RFC 1723, even though it breaks RIP as a discovery protocol. -d Do not run in the background. This option is meant for interac- tive use. -F net[/mask][,metric] Minimize routes in transmissions via interfaces with addresses that match net/mask, and synthesizes a default route to this machine with the metric. The intent is to reduce RIP traffic on slow, point-to-point links such as PPP links by replacing many large UDP packets of RIP information with a single, small packet containing a "fake" default route. If metric is absent, a value of 14 is assumed to limit the spread of the "fake" default route. This is a dangerous feature that when used carelessly can cause routing loops. Notice also that more than one interface can match the specified network number and mask. See also -g. -g Used on internetwork routers to offer a route to the "default" destination. It is equivalent to -F 0/0,1 and is present mostly for historical reasons. A better choice is -P pm_rdisc on the command line or pm_rdisc in the /etc/gateways file, since a larger metric will be used, reducing the spread of the potential- ly dangerous default route. This is typically used on a gateway to the Internet, or on a gateway that uses another routing proto- col whose routes are not reported to other local routers. Notice that because a metric of 1 is used, this feature is dangerous. It is more commonly accidentally used to create chaos with a routing loop than to solve problems. -h Causes host or point-to-point routes to not be advertised, pro- vided there is a network route going the same direction. That is a limited kind of aggregation. This option is useful on gateways to Ethernets that have other gateway machines connected with point-to-point links such as SLIP. -m Causes the machine to advertise a host or point-to-point route to its primary interface. It is useful on multi-homed machines such as NFS servers. This option should not be used except when the cost of the host routes it generates is justified by the popular- ity of the server. It is effective only when the machine is sup- plying routing information, because there is more than one inter- face. The -m option overrides the -q option to the limited extent of advertising the host route. -P parms Equivalent to adding the parameter line parms to the /etc/gateways file. -q Opposite of the -s option. -s Forces routed to supply routing information. This is the default if multiple network interfaces are present on which RIP or Router Discovery have not been disabled, and if the kernel sysctl(8) net.inet.ip.forwarding=1. -T tracefile Increases the debugging level to at least 1 and causes debugging information to be appended to the trace file. Note that because of security concerns, it is wisest to not run routed routinely with tracing directed to a file. -t Increases the debugging level, which causes more information to be logged on the tracefile specified with -T or standard out. The debugging level can be increased or decreased with the SIGUSR1 or SIGUSR2 signals or with the rtquery(8) command. Any other argument supplied is interpreted as the name of a file in which the actions of routed should be logged. It is better to use -T instead of appending the name of the trace file to the command. routed also supports the notion of "distant" passive or active gateways. When routed is started, it reads the file /etc/gateways to find such dis- tant gateways which may not be located using only information from a routing socket, to discover if some of the local gateways are passive, and to obtain other parameters. Gateways specified in this manner should be marked passive if they are not expected to exchange routing informa- tion, while gateways marked active should be willing to exchange RIP packets. Routes through passive gateways are installed in the kernel's routing tables once upon startup and are not included in transmitted RIP responses. Distant active gateways are treated like network interfaces. RIP responses are sent to the distant active gateway. If no responses are re- ceived, the associated route is deleted from the kernel table and RIP responses advertised via other interfaces. If the distant gateway resumes sending RIP responses, the associated route is restored. Such gateways can be useful on media that do not support broadcasts or multicasts but otherwise act like classic shared media like Ethernets, such as some ATM networks. One can list all RIP routers reachable on the ATM network in /etc/gateways with a series of "host" lines. Gateways marked external are also passive, but are not placed in the ker- nel routing table nor are they included in routing updates. The function of external entries is to indicate that another routing process will in- stall such a route if necessary, and that alternate routes to that desti- nation should not be installed by routed. Such entries are only required when both routers may learn of routes to the same destination. The /etc/gateways file is comprised of a series of lines, each in one of the following formats or consist of parameters described below: net Nname[/mask] gateway Gname metric value <passive | active | extern> host Hname gateway Gname metric value <passive | active | extern> Nname or Hname is the name of the destination network or host. It may be a symbolic network name or an Internet address specified in "dot" nota- tion (see inet(3)). If it is a name, then it must either be defined in /etc/networks or /etc/hosts, or named(8) must have been started before routed. mask is an optional number between 1 and 32 indicating the netmask asso- ciated with Nname. Gname is the name or address of the gateway to which RIP responses should be forwarded. value is the hop count to the destination host or network. host Hname is equivalent to net nname/32. One of the keywords passive, active, or external must be present to indi- cate whether the gateway should be treated as passive or active (as described above), or whether the gateway is external to the scope of the RIP protocol. Lines that start with neither "net" nor "host" must consist of one or more of the following parameter settings, separated by commas or blanks: if=ifname Indicates that the other parameters on the line apply to the in- terface name ifname. This typically is the first entry in all lines in /etc/gateways. subnet=nname[/mask][,metric] Advertises a route to network nname with mask mask and the sup- plied metric (default 1). This is useful for filling "holes" in CIDR allocations. This parameter must appear by itself on a line. Do not use this feature unless necessary. It is dangerous. passwd=XXX Specifies a RIPv2 password that will be included on all RIPv2 responses sent and checked on all RIPv2 responses received. The password must not contain any blanks, tab characters, commas or '#' characters. no_ag Turns off aggregation of subnets in RIPv1 and RIPv2 responses. no_super_ag Turns off aggregation of networks into supernets in RIPv2 responses. passive Equivalent to no_rip no_rdisc. no_rip Disables all RIP processing on the specified interface (no RIP will be transmitted, and any received RIP packets will be ig- nored). If no interfaces are allowed to process RIP packets, routed acts purely as a router discovery daemon. Note that turn- ing off RIP without explicitly turning on router discovery adver- tisements with rdisc_adv or -s causes routed to act as a client router discovery daemon, not advertising. no_ripv1_in Causes RIPv1 received responses to be ignored. no_ripv2_in Causes RIPv2 received responses to be ignored. ripv2_out Turns off RIPv1 output and causes RIPv2 advertisements to be mul- ticast when possible. no_rdisc Disables the Internet Router Discovery Protocol. no_solicit Disables the transmission of Router Discovery Solicitations. send_solicit Specifies that Router Discovery solicitations should be sent, even on point-to-point links, which by default only listen to Router Discovery messages. no_rdisc_adv Disables the transmission of Router Discovery Advertisements. rdisc_adv Specifies that Router Discovery advertisements should be sent, even on point-to-point links, which by default only listen to Router Discovery messages. bcast_rdisc Specifies that Router Discovery packets should be broadcast in- stead of multicast. rdisc_pref=N Sets the preference in Router Discovery Advertisements to the in- teger N. rdisc_interval=N Sets the nominal interval with which Router Discovery Advertise- ments are transmitted to N seconds and their lifetime to 3*N. fake_default=metric Has an identical effect to -F net[/mask][,metric] with the net- work and mask coming from the specified interface. pm_rdisc Similar to fake_default. When RIPv2 routes are multicast, so that RIPv1 listeners cannot receive them, this feature causes a RIPv1 default route to be broadcast to RIPv1 listeners. Unless modified with fake_default, the default route is broadcast with a metric of 14. That serves as a "poor man's router discovery" protocol. Note that the netmask associated with point-to-point links (such as SLIP or PPP, with the IFF_POINTOPOINT flag) is used by routed to infer the netmask used by the remote system when RIPv1 is used.
/etc/gateways for distant gateways
netstat(1), icmp(4), route(4), udp(4), bgpd(8), ifconfig(8), ospfd(8), route(8), rtquery(8) Internet Transport Protocols, XSIS 028112, Xerox System Integration Standard.
The routed command appeared in 4.2BSD.
It does not always detect unidirectional failures in network interfaces (e.g. when the output side fails). MirOS BSD #10-current June 1, 1996 5
Generated on 2015-07-19 22:36:15 by $MirOS: src/scripts/roff2htm,v 1.80 2015/01/02 13:54:19 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002–2015 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.