CRON(8) BSD System Manager's Manual CRON(8)
cron - clock daemon
cron [-l load_avg] [-n] [-x [ext,sch,proc,pars,load,misc,test]]
The cron daemon schedules commands to be run at specified dates and times. Commands that are to be run periodically are specified within crontab(5) files. Commands that are only to be run once are scheduled via the at(1) and batch(1) commands. Normally, the cron daemon is started from the /etc/rc command script. Because it can execute commands on a user's behalf, cron should be run late in the startup sequence, as close to the time when logins are accepted as possible. cron loads crontab(5) and at(1) files when it starts up and also when changes are made via the crontab(1) and at(1) commands. Additionally, cron checks the modification time on the system crontab file (/etc/crontab), the crontab spool (/var/cron/tabs), and the at spool (/var/cron/atjobs) once a minute. If the modification time has changed, the affected files are reloaded. Any output produced by a command is sent to the user specified in the MAILTO environment variable as set in the crontab(5) file or, if no MAILTO variable is set (or if this is an at(1) or batch(1) job), to the job's owner. If a command produces no output or if the MAILTO environment variable is set to the empty string, no mail will be sent. The exception to this is at(1) or batch(1) jobs submitted with the -m flag. In this case, mail will be sent even if the job produces no output.
Local time changes of less than three hours, such as those caused by the start or end of Daylight Saving Time, are handled specially. This only applies to jobs that run at a specific time and jobs that are run with a granularity greater than one hour. Jobs that run more frequently are scheduled normally. If time has moved forward, those jobs that would have run in the interval that has been skipped will be run immediately. Conversely, if time has moved backward, care is taken to avoid running jobs twice. Time changes of more than 3 hours are considered to be corrections to the clock or timezone, and the new time is used immediately. The options are as follows: -l load_avg If the current load average is greater than load_avg, batch(1) jobs will not be run. The default value is 1.5. To allow batch(1) jobs to run regardless of the load, a value of 0.0 may be used. -n By default, cron will detach from the current tty and become a daemon. The -n option disables this behavior and causes it to run in the foreground. -x debug_flags If cron was compiled with debugging support, a number of debug- ging flags are available to show what cron is doing. The follow- ing flags may be specified: ext show extended information; used in conjunction with other debug flags to provide even more information sch print information related to scheduling jobs proc print information related to running processes pars print information related to parsing crontab(5) files load print when loading the databases misc show misc other debugging information test test mode; don't actually execute commands Multiple flags may be specified, separated by a comma (','). Re- gardless of which flags were specified, the -x flag will cause cron to stay in the foreground and not become a daemon.
SIGHUP causes cron to close and reopen its log file. This is useful in scripts which rotate and age log files. On OpenBSD this has no effect because cron logs via syslog(3).
/etc/crontab system crontab file /var/cron/atjobs directory containing at(1) jobs /var/cron/log cron's log file /var/cron/tabs directory containing individual crontab files /var/cron/tabs/.sock used by crontab(1) to tell cron to check for cron- tab changes immediately
at(1), crontab(1), syslog(3), crontab(5)
Paul Vixie <firstname.lastname@example.org>
All crontab(5) files must not be readable or writable by any user other than their owner, including /etc/crontab. In practice this means they should be mode 0600. This restriction is enforced automatically by crontab(1) but if /etc/crontab is used, the mode must be set manually on that file. MirOS BSD #10-current July 6, 2002 1
Generated on 2015-07-19 22:36:15 by $MirOS: src/scripts/roff2htm,v 1.80 2015/01/02 13:54:19 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002–2015 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.