PMAP(9) BSD Kernel Manual PMAP(9)
pmap - machine dependent interface to the MMU
The architecture-dependent pmap module describes how the physical mapping is done between the user-processes and kernel virtual addresses and the physical addresses of the main memory, providing machine-dependent trans- lation and access tables that are used directly or indirectly by the memory-management hardware. The pmap layer can be viewed as a big array of mapping entries that are indexed by virtual address to produce a phy- sical address and flags. These flags describe the page's protection, whether the page has been referenced or modified and other characteris- tics. The pmap interface is consistent across all platforms and hides the way page mappings are stored.
void pmap_init(void); The pmap_init() function is called from the machine-independent uvm(9) initialization code, when the MMU is enabled.
Modified/referenced information is only tracked for pages managed by uvm(9) (pages for which a vm_page structure exists). Only managed map- pings of those pages have modified/referenced tracking. The use of un- managed mappings should be limited to code which may execute in interrupt context (such as malloc(9)) or to enter mappings for physical addresses which are not managed by uvm(9). This allows pmap modules to avoid block- ing interrupts when manipulating data structures or holding locks. Un- managed mappings may only be entered into the kernel's virtual address space. The modified/referenced bits must be tracked on a per-page basis, as they are not attributes of a mapping, but attributes of a page. There- fore, even after all mappings for a given page have been removed, the modified/referenced bits for that page must be preserved. The only time the modified/referenced bits may be cleared is when uvm(9) explicitly calls the pmap_clear_modify() and pmap_clear_reference() functions. These functions must also change any internal state necessary to detect the page being modified or referenced again after the modified/referenced state is cleared. Mappings entered by pmap_enter() are managed, mappings entered by pmap_kenter_pa() are not.
int pmap_enter(pmap_t pmap, vaddr_t va, paddr_t pa, vm_prot_t prot, int flags); void pmap_kenter_pa(vaddr_t va, paddr_t pa, vm_prot_t prot); void pmap_remove(pmap_t pmap, vaddr_t sva, paddr_t eva); void pmap_kremove(vaddr_t va, vsize_t size); The pmap_enter() function creates a managed mapping for physical page pa at the specified virtual address va in the target physical map pmap with protection specified by prot: VM_PROT_READ The mapping must allow reading. VM_PROT_WRITE The mapping must allow writing. VM_PROT_EXECUTE The page mapped contains instructions that will be exe- cuted by the processor. The flags argument contains protection bits (the same bits used in the prot argument) indicating the type of access that caused the mapping to be created. This information may be used to seed modified/referenced in- formation for the page being mapped, possibly avoiding redundant faults on platforms that track modified/referenced information in software. Oth- er information provided by flags: PMAP_WIRED The mapping being created is a wired mapping. PMAP_CANFAIL The call to pmap_enter() is allowed to fail. If this flag is not set, and the pmap_enter() call is unable to create the mapping, perhaps due to insufficient resources, the pmap module must panic. The access type provided in the flags argument will never exceed the pro- tection specified by prot. The pmap_enter() function is called by the fault routine to establish a mapping for the page being faulted in. If pmap_enter() is called to enter a mapping at a virtual address for which a mapping already exists, the previous mapping must be invalidated. pmap_enter() is sometimes called to change the protection for a pre-existing mapping, or to change the "wired" attribute for a pre-existing mapping. The pmap_kenter_pa() function creates an unmanaged mapping of physical address pa at the specified virtual address va with the protection speci- fied by prot. The pmap_remove() function removes the range of virtual addresses sva to eva from pmap, assuming proper alignment. pmap_remove() is called during an unmap operation to remove low-level machine dependent mappings. The pmap_kremove() function removes an unmanaged mapping at virtual ad- dress size. A call to pmap_update() must be made after pmap_kenter_pa() or pmap_kremove() to notify the pmap layer that the mappings need to be made correct.
void pmap_unwire(pmap_t pmap, vaddr_t va); void pmap_protect(pmap_t pmap, vaddr_t sva, vaddr_t eva, vm_prot_t prot); void pmap_page_protect(struct vm_page *pg, vm_prot_t prot); The pmap_unwire() function clears the wired attribute for a map/virtual- address pair. The mapping must already exist in pmap. The pmap_protect() function sets the physical protection on range sva to eva, in pmap. The pmap_protect() function is called during a copy-on-write operation to write protect copy-on-write memory, and when paging out a page to remove all mappings of a page. The pmap_page_protect() function sets the permis- sion for all mapping to page pg. The pmap_page_protect() function is called before a pageout operation to ensure that all pmap references to a page are removed. PHYSICAL PAGE-USAGE INFORMATION boolean_t pmap_is_modified(struct vm_page *pg); boolean_t pmap_clear_modify(struct vm_page *pg); boolean_t pmap_is_referenced(struct vm_page *pg); boolean_t pmap_clear_reference(struct vm_page *pg); The pmap_is_modified() and pmap_clear_modify() functions read/set the modify bits on the specified physical page pg. The pmap_is_referenced() and pmap_clear_reference() functions read/set the reference bits on the specified physical page pg. The pmap_is_referenced() and pmap_is_modified() functions are called by the pagedaemon when looking for pages to free. The pmap_clear_referenced() and pmap_clear_modify() functions are called by the pagedaemon to help identification of pages that are no longer in demand.
void pmap_copy_page(struct vm_page *src, struct vm_page *dst); void pmap_zero_page(struct vm_page *page); The pmap_copy_page() function copies the content of the physical page src to physical page dst. The pmap_zero_page() function fills page with zeroes.
pmap_t pmap_create(void); void pmap_reference(pmap_t pmap); void pmap_destroy(pmap_t pmap); The pmap_create() function creates an instance of the pmap structure. The pmap_reference() function increments the reference count on pmap. The pmap_destroy() function decrements the reference count on physical map pmap and retires it from service if the count drops to zero, assuming it contains no valid mappings.
void pmap_steal_memory(vsize_t size, vaddr_t *vstartp, vaddr_t *vendp); vaddr_t pmap_growkernel(vaddr_t maxkvaddr); void pmap_update(pmap_t pmap); void pmap_collect(pmap_t pmap); void pmap_virtual_space(vaddr_t *vstartp, vaddr_t *vendp); void pmap_copy(pmap_t dst_pmap, pmap_t src_pmap, vaddr_t dst_addr, vsize_t len, vaddr_t src_addr); Wired memory allocation before the virtual memory system is bootstrapped is accomplished by the pmap_steal_memory() function. After that point, the kernel memory allocation routines should be used. The pmap_growkernel() function can preallocate kernel page tables to a specified virtual address. The pmap_update() function notifies the pmap module to force processing of all delayed actions for all pmaps. The pmap_collect() function informs the pmap module that the given pmap is not expected to be used for some time, giving the pmap module a chance to prioritize. The initial bounds of the kernel virtual address space are returned by pmap_virtual_space(). The pmap_copy() function copies the range specified by src_addr and src_len from src_pmap to the range described by dst_addr and dst_len in dst_map. pmap_copy() is called during a fork(2) operation to give the child process an initial set of low-level mappings.
The 4.4BSD pmap module is based on Mach 3.0. The introduction of uvm(9) left the pmap interface unchanged for the most part.
Ifdefs must be documented. pmap_update() should be mandatory. MirOS BSD #10-current September 21, 2001 3
Generated on 2015-04-13 10:26:13 by $MirOS: src/scripts/roff2htm,v 1.80 2015/01/02 13:54:19 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002–2015 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.