TRPT(8) BSD System Manager's Manual TRPT(8)
trpt - transliterate protocol trace
trpt [-a] [-f] [-j] [-p hex-address] [-s] [-t] [-N system] [-M core]
trpt interrogates the buffer of TCP trace records created when a socket is marked for "debugging" (see setsockopt(2)), and prints a readable description of these records. When no options are supplied, trpt prints all the trace records found in the system grouped according to TCP con- nection protocol control block (PCB). The options are as follows: -a In addition to the normal output, print the values of the source and destination addresses for each packet recorded. -f Follow the trace as it occurs, waiting a short time for addition- al records each time the end of the log is reached. -j Just give a list of the protocol control block addresses for which there are trace records. -p Show only trace records associated with the protocol control block at the given address hex-address. -s In addition to the normal output, print a detailed description of the packet sequencing information. -t In addition to the normal output, print the values for all timers at each point in the trace. -M core Extract values associated with the name list from core instead of the running kernel. -N system Extract the name list from system instead of the running kernel. The recommended use of trpt is as follows. Isolate the problem and enable debugging on the socket(s) involved in the connection. Find the address of the protocol control blocks associated with the sockets using the -A option to netstat(1). Then run trpt with the -p option, supplying the as- sociated protocol control block addresses. The -f option can be used to follow the trace log once the trace is located. If there are many sockets using the debugging option, the -j option may be useful in checking to see if any trace records are present for the socket in question.
no namelist When the system image doesn't contain the proper symbols to find the trace buffer; others which should be self explanatory.
The trpt command appeared in 4.2BSD.
Should also print the data for each input or output, but this is not saved in the trace record. The output format is inscrutable and should be described here. MirOS BSD #10-current December 11, 1993 1
Generated on 2014-04-02 20:57:59 by $MirOS: src/scripts/roff2htm,v 1.79 2014/02/10 00:36:11 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002‒2014 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.