SLATTACH(8) BSD System Manager's Manual SLATTACH(8)
slattach - attach serial lines as network interfaces
slattach [-hm] [-s baudrate] ttyname
slattach is used to assign a tty line to a network interface, and will attach the named tty line to the first available slipdevice that is con- figured and up. The following operands are supported by slattach: -h Turn on RTS/CTS flow control. By default, no flow control is done. -m Maintain modem control signals after closing the line. Specifically, this disables HUPCL. -s baudrate Specifies the speed of the connection. If not specified, the default of 9600 is used. ttyname Specifies the name of the tty device. ttyname should be a string of the form "ttyXX", or "/dev/ttyXX". In addition, the following flags to ifconfig(8) control various proper- ties of the link: link0 Turn on Van Jacobsen header compression. -link0 Turn off header compression. link1 Don't pass through ICMP packets. -link1 Do pass through ICMP packets. link2 If a packet with a compressed header is received, automati- cally enable compression of outgoing packets. -link2 Don't auto-enable compression. Only the superuser may attach a network interface. To detach the interface, use "ifconfig interface-name down" after killing off the slattach process. interface-name is the name that is shown by netstat(1).
# ifconfig sl0 10.0.0.1 10.0.0.2 link0 link2 up # slattach ttyh8 # ifconfig sl1 192.168.0.1 192.168.0.2 link0 up # slattach -s 4800 /dev/tty01
Messages indicating the specified interface does not exist, the requested address is unknown, the user is not privileged and tried to alter an interface's configuration.
netstat(1), netintro(4), ifconfig(8), rc(8)
The slattach command appeared in 4.3BSD. MirOS BSD #10-current April 1, 1994 1
Generated on 2015-04-13 10:26:13 by $MirOS: src/scripts/roff2htm,v 1.80 2015/01/02 13:54:19 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002–2015 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.