SCAN_FFS(8) BSD System Manager's Manual SCAN_FFS(8)
scan_ffs - find UFS/FFS partitions on a disk
scan_ffs [-lsv] [-b begin] [-e end] device
This is the life-saver of typos. If you have ever been working too long, and just happened to type 'disklabel -rw sd0 floppy', instead of 'diskla- bel -rw fd0 floppy', you know what I am talking about. This little program will take a raw disk device (which you might have to create) that covers the whole disk, and finds all probable UFS/FFS parti- tions on the disk. It has various options to make it go faster, and to print out information to help in the reconstruction of the disklabel. The options are as follows: -l This will make scan_ffs print out a string looking much like the input to disklabel. With a little massaging, this output can usu- ally be used in the disklabel edit. -s This tells scan_ffs to be smart about skipping partitions (when it thinks it found a valid one). By not scanning partitions for superblocks, the program completes a couple of orders of magni- tude faster. However, sometimes being smart is too good for its own good, especially if your disk has had a different layout pre- viously, or contains other non-UFS/FFS filesystems. -v Tell scan_ffs to be verbose about what it is doing, and what it has found. -b begin Tell scan_ffs where to begin searching for filesystems. This makes it easier to skip swap partitions, or other large non- UFS/FFS partitions. -e end Ditto for telling scan_ffs where to stop. device This specifies which device scan_ffs should use to scan for filesystems. Usually this device should cover the whole disk in question. The basic operation of this program is as follows: 1. Panic. You usually do so anyways, so you might as well get it over with. Just don't do anything stupid. Panic away from your machine. Then relax, and see if the steps below won't help you out. 2. Try to find your old disklabel by any other means possible. This includes printouts, backups (look in /var/backups/), screendumps, and whatever other method you can think of. The more information you have, the better your chances are in recovering the disklabel of the disk. 3. Create a disklabel on the affected disk, which covers the whole disk, and has at least one partition which covers the whole disk. As the "c" partition usually covers the whole disk anyways, this sounds like a good place to start. 4. Run scan_ffs over this partition. If you have any information about the disklabel which used to exist on the disk, keep that in mind while scan_ffs spews out its things. 5. Use disklabel(8) to reconstruct the disklabel on the affected disk, using all the information you gathered from scan_ffs and other sources. Last but certainly not least, we wish you good luck. The UFS/FFS filesys- tems are pretty sturdy. I've seen them reconstructed after some pretty weird and awesome fumbles. If you can't have backups, at least have funky tools to help you out of a jam when they happen.
It is not perfect, and could do a lot more things with date/time informa- tion in the superblocks it finds, but this program has saved more than one butt, more than once. MirOS BSD #10-current January 31, 1998 1
Generated on 2014-07-04 21:17:45 by $MirOS: src/scripts/roff2htm,v 1.79 2014/02/10 00:36:11 tg Exp $
This product includes material provided by Thorsten Glaser.