MirOS Manual: lpc(8)

LPC(8)                   BSD System Manager's Manual                    LPC(8)

NAME

     lpc - line printer control program

SYNOPSIS

     lpc [command [argument ...]]

DESCRIPTION

     lpc is used by the system administrator to control the operation of the
     line printer system. For each line printer configured in /etc/printcap,
     lpc may be used to:

           •   disable or enable a printer,

           •   disable or enable a printer's spooling queue,

           •   rearrange the order of jobs in a spooling queue,

           •   find the status of printers, and their associated spooling
               queues and printer daemons.

     Without any arguments, lpc will prompt for commands from the standard in-
     put. If arguments are supplied, lpc interprets the first argument as a
     command and the remaining arguments as parameters to the command. The
     standard input may be redirected causing lpc to read commands from file.
     Commands may be abbreviated; the following is the list of recognized com-
     mands.

     ? [command ...]
     help [command ...]
             Print a short description of each command specified in the argu-
             ment list, or, if no argument is given, a list of the recognized
             commands.

     abort { all | printer }
             Terminate an active spooling daemon on the local host immediately
             and then disable printing (preventing new daemons from being
             started by lpr(1)) for the specified printers.

     clean { all | printer }
             Remove any temporary files, data files, and control files that
             cannot be printed (i.e., do not form a complete printer job) from
             the specified printer queue(s) on the local machine.

     disable { all | printer }
             Turn the specified printer queues off. This prevents new printer
             jobs from being entered into the queue by lpr(1).

     down { all | printer } message [...]
             Turn the specified printer queue off, disable printing and put
             message in the printer status file. The message doesn't need to
             be quoted, the remaining arguments are treated like echo(1). This
             is normally used to take a printer down and let users know why.
             lpq(1) will indicate the printer is down and print the status
             message.

     enable { all | printer }
             Enable spooling on the local queue for the listed printers. This
             will allow lpr(1) to put new jobs in the spool queue.

     exit
     quit    Exit from lpc.

     restart { all | printer }
             Attempt to start a new printer daemon. This is useful when some
             abnormal condition causes the daemon to die unexpectedly, leaving
             jobs in the queue. lpq(1) will report that there is no daemon
             present when this condition occurs. If the user is the superuser,
             try to abort the current daemon first (i.e., kill and restart a
             stuck daemon).

     start { all | printer }
             Enable printing and start a spooling daemon for the listed
             printers.

     status { all | printer }
             Display the status of daemons and queues on the local machine.

     stop { all | printer }
             Stop a spooling daemon after the current job completes and dis-
             able printing.

     topq printer [ jobnum ... ] [ user ... ]
             Place the jobs in the order listed at the top of the printer
             queue.

     up { all | printer }
             Enable everything and start a new printer daemon. Undoes the ef-
             fects of down.

FILES

     /etc/printcap             printer description file
     /var/spool/output/*       spool directories
     /var/spool/output/*/lock  lock file for queue control

DIAGNOSTICS

     ?Ambiguous command
             Abbreviation matches more than one command.

     ?Invalid command
             No match was found.

     ?Privileged command
             You must be a member of group "operator" or user "root" to exe-
             cute this command.

SEE ALSO

     lpq(1), lpr(1), lprm(1), printcap(5), lpd(8)

HISTORY

     The lpc command appeared in 4.2BSD.

MirOS BSD #10-current           April 28, 1995                               1

Generated on 2014-07-04 21:17:45 by $MirOS: src/scripts/roff2htm,v 1.79 2014/02/10 00:36:11 tg Exp $

These manual pages and other documentation are copyrighted by their respective writers; their source is available at our CVSweb, AnonCVS, and other mirrors. The rest is Copyright © 2002‒2014 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.