SYSLOG.CONF(5) BSD Reference Manual SYSLOG.CONF(5)
syslog.conf - syslogd(8) configuration file
The syslog.conf file is the configuration file for the syslogd(8) pro- gram. It consists of blocks of lines separated by program specifications, with each line containing two fields: the selector field which specifies the types of messages and priorities to which the line applies, and an action field which specifies the action to be taken if a message syslogd receives matches the selection criteria. The selector field is separated from the action field by one or more tab characters. The selectors function is encoded as a facility, a period ('.'), and a level, with no intervening whitespace. Both the facility and the level are case insensitive. The facility describes the part of the system generating the message, and is one of the following keywords: auth, authpriv, cron, daemon, kern, lpr, mail, mark, news, syslog, user, uucp and local0 through local7. These keywords (with the exception of mark) correspond to the similar "LOG_" values specified to the openlog(3) and syslog(3) library routines. The level describes the severity of the message, and is a keyword from the following ordered list (highest to lowest): emerg, alert, crit, err, warning, notice, info and debug. These keywords correspond to the similar (LOG_) values specified to the syslog library routine. Each block of lines is separated from the previous block by a tag. The tag is a line beginning with !prog and each block will be associated with calls to syslog from that specific program. When a message matches multi- ple blocks, the action of each matching block is taken. If no tag is specified at the beginning of the file, every line is checked for a match and acted upon (at least until a tag is found). !!prog causes the subsequent block to abort evaluation when a message matches, ensuring that only a single set of actions is taken. !* can be used to ensure that any ensuing blocks are further evaluated (i.e. can- celling the effect of a !prog or !!prog). See syslog(3) for further descriptions of both the facility and level keywords and their significance. It's preferred that selections be made on facility rather than program, since the latter can easily vary in a networked environment. In some cases, though, an appropriate facility simply doesn't exist. If a received message matches the specified facility and is of the speci- fied level (or a higher level), and the first word in the message after the date matches the program, the action specified in the action field will be taken. Multiple selectors may be specified for a single action by separating them with semicolon (';') characters. It is important to note, however, that each selector can modify the ones preceding it. Multiple facilities may be specified for a single level by separating them with comma (',') characters. An asterisk ('*') can be used to specify all facilities, all levels or all programs. The special facility "mark" receives a message at priority "info" every 20 minutes (see syslogd(8)). This is not enabled by a facility field con- taining an asterisk. The special level "none" disables a particular facility. The action field of each line specifies the action to be taken when the selector field selects a message. There are five forms: • A pathname (beginning with a leading slash). Selected messages are appended to the file. • A hostname (preceded by an at ('@') sign). Selected messages are for- warded to the syslogd program on the named host. A port number may be optionally specified using the host:port syntax. • A comma separated list of users. Selected messages are written to those users if they are logged in. • An asterisk. Selected messages are written to all logged-in users. • A colon, followed by a memory buffer size (in kilobytes), followed by another colon, followed by a buffer name. Selected messages are writ- ten to an in-memory buffer that may be read using syslogc(8). Memory buffered logging is useful to provide access to log data on devices that lack local storage (e.g. diskless workstations or routers). The largest allowed buffer size is 256kb. Blank lines and lines whose first non-blank character is a hash ('#') character are ignored.
/etc/syslog.conf The syslogd(8) configuration file.
A configuration file might appear as follows: # Log info (and higher) messages from spamd only to # a dedicated file, discarding debug messages. # Matching messages abort evaluation of further rules. !!spamd daemon.info /var/log/spamd daemon.debug /dev/null !* # Log all kernel messages, authentication messages of # level notice or higher and anything of level err or # higher to the console. # Don't log private authentication messages! *.err;kern.*;auth.notice;authpriv.none /dev/console # Log anything (except mail) of level info or higher. # Don't log private authentication messages! *.info;mail.none;authpriv.none /var/log/messages # The authpriv file has restricted access. authpriv.* /var/log/secure # Log all the mail messages in one place. mail.* /var/log/maillog # Everybody gets emergency messages, plus log them on another # machine. *.emerg * *.emerg @arpa.berkeley.edu # Root and Eric get alert and higher messages. *.alert root,eric # Save mail and news errors of level err and higher in a # special file. mail,news.err /var/log/spoolerr # Save ftpd transactions along with mail and news !ftpd *.* /var/log/spoolerr # Keep a copy of all logging in a 32k memory buffer named "debug" *.debug :32:debug # Store notices and authpriv messages in a 64k buffer named "important" *.notice,authpriv.* :64:important
syslog(3), syslogc(8), syslogd(8)
The syslog.conf file appeared in 4.3BSD, along with syslogd(8).
The effects of multiple selectors are sometimes not intuitive. For exam- ple "mail.crit;*.err" will select "mail" facility messages at the level of "err" or higher, not at the level of "crit" or higher. MirOS BSD #10-current June 9, 1993 2
Generated on 2015-04-13 10:26:13 by $MirOS: src/scripts/roff2htm,v 1.80 2015/01/02 13:54:19 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002–2015 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.