NEWSYSLOG(8) BSD System Manager's Manual NEWSYSLOG(8)
newsyslog - trim log files to manageable sizes
newsyslog [-Fmnrv] [-a directory] [-f config_file] [log ...]
newsyslog is a program that should be scheduled to run periodically by cron(8). When it is executed it archives log files if necessary. If a log file is determined to require archiving, newsyslog rearranges the files so that logfile is empty, logfile.0 has the last period's logs in it, logfile.1 has the next to last period's logs in it, and so on, up to a user-specified number of archived logs. The archived logs may be option- ally compressed to save space. The options are as follows: -a directory Specify a directory into which archived log files will be writ- ten. If directory is a relative path, it is appended to the parent directory of each log and the archived log is stored in the result. If an absolute path is given, all archived logs are stored in the given directory. If directory does not exist for a specified log, it is ignored for that entry and the log is rotat- ed as if the -a option was not specified. -F Force newsyslog to trim logs regardless of the size and/or age requirements specified in /etc/newsyslog.conf. This option may be combined with the -n or -v flags to aid in debugging problems with /etc/newsyslog.conf. -f config_file Use config_file instead of /etc/newsyslog.conf for the configura- tion file. -m Monitoring mode; only entries marked with an 'M' in flags are processed. For each log file being monitored, any log output since the last time newsyslog was run with the -m flag is mailed to the user listed in the monitor notification section. -n Do not trim the logs, but instead print out what would be done if this option were not specified. -r Removes the restriction that newsyslog must be running as root. Note that in this mode newsyslog will not be able to send a SIGHUP signal to syslogd(8). -v Place newsyslog in verbose mode. In this mode it will print out each log and its reasons for either trimming that log or skipping it. If one or more log files are specified on the command line, only the specified logs will be rotated. Note that each log specified must have an entry in /etc/newsyslog.conf. A log can be archived because of two reasons: The log file can have grown bigger than a preset size in kilobytes, or a preset number of hours may have elapsed since the last log archive. The granularity of newsyslog is dependent on how often it is scheduled to run in cron(8). Since the pro- gram is quite fast, it may be scheduled to run every hour without any ill effects. When starting up, newsyslog reads in a configuration file to determine which logs should be looked at. By default, this configuration file is /etc/newsyslog.conf. Each line of the file contains information about a particular log file that should be handled by newsyslog. Each line has five mandatory fields and up to three optional fields, with whitespace separating each field. Blank lines or lines beginning with a hash mark ('#') are ignored. The fields of the configuration file are as follows: logfile_name The full pathname of the system log file to be ar- chived. owner:group This optional field specifies the owner and group for the archive file. The ':' is essential, even if the owner or group field is left blank. The fields may be numeric, or a name which is looked up in the system password and group databases. For backwards compatibil- ity, a '.' may be used instead of a ':'. If either owner or group is not specified, the owner and/or group of the existing log file is used. mode File mode (in octal) to use for created log files and archives. count The number of archives to be kept besides the log file itself. size When the size of the log file (in kilobytes) reaches this point, the log file is trimmed as described above. If this field is replaced by an '*', then the size of the log file is not taken into account when determining when to trim the log file. By default, files smaller than 512 bytes are not rotated unless the 'B' (binary) flag is set. This prevents newsyslog from rotating files consisting solely of a message indicating that the log file has been turned over. when The when field can consist of an interval, a specific time, or both. If the when field consists of an aster- isk ('*'), log rotation will depend only on the con- tents of the size field. Otherwise, the when field con- sists of an optional interval in hours, possibly fol- lowed by an '@'-sign and a time in a restricted ISO 8601 format or by a '$'-sign and a time specification for logfile rotation at a fixed time once per day, per week or per month. If a time is specified, the log file will only be trimmed if newsyslog is run within one hour of the specified time. If an interval is specified, the log file will be trimmed if that many hours have passed since the last rotation. When both a time and an inter- val are specified, both conditions must be satisfied for the rotation to take place. There is no provision for the specification of a timezone. There is little point in specifying an expli- cit minutes or seconds component in the current imple- mentation, since the only comparison is 'within the hour'. ISO 8601 restricted time format: The lead-in character for a restricted ISO 8601 time is an '@'-sign. The par- ticular format of the time in restricted ISO 8601 is: [[[[[cc]yy]mm]dd][T[hh[mm[ss]]]]]. Optional date fields default to the appropriate component of the current date; optional time fields default to midnight For ex- ample, if today is January 22, 1999, the following date specifications are all equivalent: '19990122T000000' '990122T000000' '0122T000000' '22T000000' 'T000000' 'T0000' 'T00' '22T' 'T' '' Day, week and month time format: The lead-in character for day, week and month specification is a '$'-sign. The particular format of day, week and month specifica- tion is: [Dhh], [Ww[Dhh]] and [Mdd[Dhh]], respectively. Optional time fields default to midnight. The ranges for day and hour specifications are: hh hours, range 0 ... 23 w day of week, range 0 ... 6, 0 = Sunday dd day of month, range 1 ... 31, or the letter L or l to specify the last day of the month. Some examples: $D0 rotate every night at midnight (same as @T00) $D23 rotate every day at 23:00 hr (same as @T23) $W0D23 rotate every week on Sunday at 23:00 hr $W5D16 rotate every week on Friday at 16:00 hr $M1D0 rotate on the first day of every month at midnight (i.e., the start of the day; same as @01T00) $M5D6 rotate on every 5th day of the month at 6:00 hr (same as @05T06) flags The optional flags field specifies if the archives should have any special processing done to the archived log files. The 'Z' flag will make the archive files compressed to save space using gzip(1) or compress(1), depending on compilation options. The 'B' flag means that the file is a binary file, and so the ASCII mes- sage which newsyslog inserts to indicate the fact that the logs have been turned over should not be included. The 'M' flag marks this entry as a monitored log file. The 'F' flag specifies that symbolic links should be followed. monitor Specify the username (or email address) that should re- ceive notification messages if this is a monitored log file. Notification messages are sent as email; the operator deserves what they get if they mark the sendmail(8) log file as monitored. This field is only valid when the 'M' flag is set. pid_file This optional field specifies a file containing the PID of a process to send a signal (usually SIGHUP) to in- stead of /var/run/syslog.pid. signal Specify the signal to send to the process instead of SIGHUP. Signal names must start with "SIG" and be the signal name, not the number, e.g., SIGUSR1. command This optional field specifies a command to run instead of sending a signal to the process. The command must be enclosed in double quotes ('"'). The empty string, '""', can use used to prevent newsyslog from sending a signal or running a command. You cannot specify both a command and a PID file. NOTE: If you specify a command to be run, newsyslog will not send a SIGHUP to syslogd(8).
/etc/newsyslog.conf default configuration file
compress(1), gzip(1), syslog(3), syslogd(8)
Theodore Ts'o, MIT Project Athena Copyright 1987, Massachusetts Institute of Technology MirOS BSD #10-current September 8, 2013 3
Generated on 2015-10-25 00:47:46 by $MirOS: src/scripts/roff2htm,v 1.81 2015/10/16 13:19:09 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002–2015 The MirOS Project, Germany.
This product includes material provided by mirabilos.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.