UHID(4) BSD Programmer's Manual UHID(4)
uhid - USB generic HID support
uhid* at uhidev? reportid ?
The uhid driver provides support for all HID (Human Interface Device) in-
terfaces in USB devices that do not have a special driver.
The device handles the following ioctl(2) calls:
USB_GET_REPORT_ID (int)
Get the report identifier used by this HID report.
USB_GET_REPORT_DESC (struct usb_ctl_report_desc)
Get the HID report descriptor. Using this descriptor the exact
layout and meaning of data to/from the device can be found. The
report descriptor is delivered without any processing.
struct usb_ctl_report_desc {
int size;
u_char data[1024]; /* filled data size will vary */
};
USB_SET_IMMED (int)
Sets the device in a mode where each read(2) will return the
current value of the input report. Normally a read(2) will only
return the data that the device reports on its interrupt pipe.
This call may fail if the device does not support this feature.
USB_GET_REPORT (struct usb_ctl_report)
Get a report from the device without waiting for data on the in-
terrupt pipe. The report field indicates which report is request-
ed. It should be UHID_INPUT_REPORT, UHID_OUTPUT_REPORT, or
UHID_FEATURE_REPORT. This call may fail if the device does not
support this feature.
struct usb_ctl_report {
int report;
u_char data[1024]; /* used data size will vary */
};
USB_SET_REPORT (struct usb_ctl_report)
Set a report in the device. The report field indicates which re-
port is to be set. It should be UHID_INPUT_REPORT,
UHID_OUTPUT_REPORT, or UHID_FEATURE_REPORT. This call may fail if
the device does not support this feature.
Use read(2) to get data from the device. Data should be read in chunks of
the size prescribed by the report descriptor.
Use write(2) send data to the device. Data should be written in chunks of
the size prescribed by the report descriptor.
usbhidctl(1), usbhid(3), intro(4), uhidev(4), usb(4)
The uhid driver appeared in OpenBSD 2.6.
MirOS BSD #10-current July 12, 1998 1
Generated on 2013-04-27 00:20:00 by $MirOS: src/scripts/roff2htm,v 1.77 2013/01/01 20:49:09 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002‒2013 The MirOS Project, Germany.
This product includes material
provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.