MirOS Manual: txp(4)

TXP(4)                     BSD Programmer's Manual                      TXP(4)

NAME

     txp - 3Com 3XP Typhoon/Sidewinder (3CR990) Ethernet interface

SYNOPSIS

     txp* at pci? dev ? function ?

DESCRIPTION

     The txp interface provides access to the 10Mb/s and 100Mb/s Ethernet net-
     works via the 3Com Typhoon/Sidewinder chipset. This driver supports the
     following cards:

           •   3Com 3CR990-TX-95
           •   3Com 3CR990-TX-97
           •   3Com 3CR990SVR95
           •   3Com 3CR990SVR97

     Basic Ethernet functions are provided as well as support for vlan(4) tag
     removal and insertion assistance, receive ip(4), tcp(4), and udp(4)
     checksum offloading, and transmit ip(4) checksum offloading. There is
     currently no support for transmit tcp(4) or udp(4) checksum offloading,
     tcp(4) segmentation, nor ipsec(4) acceleration. Note that hardware check-
     summing is only used when the interface is not in bridge(4) mode.

     Each of the host's network addresses is specified at boot time with an
     SIOCSIFADDR ioctl(2). The txp interface employs the address resolution
     protocol described in arp(4) to dynamically map between Internet and Eth-
     ernet addresses on the local network.

     When a txp interface is brought up, by default, it will attempt to auto-
     negotiate the link speed and duplex mode. The speeds, in order of at-
     tempt, are: 100Mb/s Full Duplex, 100Mb/s Half Duplex, 10 Mb/s Full Du-
     plex, and 10 Mb/s Half Duplex.

     The txp supports several media types, which are selected via the
     ifconfig(8) command. The supported media types are:

           media autoselect
                   Attempt to autoselect the media type (default)

           media 100baseTX mediaopt full-duplex
                   Use 100baseTX, full duplex

           media 100baseTX [mediaopt half-duplex]
                   Use 100baseTX, half duplex

           media 10baseT mediaopt full-duplex
                   Use 10baseT, full duplex

           media 10baseT [mediaopt half-duplex]
                   Use 10baseT, half duplex

SEE ALSO

     arp(4), ifmedia(4), inet(4), intro(4), ip(4), netintro(4), pci(4),
     tcp(4), udp(4), vlan(4), hostname.if(5), ifconfig(8)

HISTORY

     The txp driver first appeared in OpenBSD 2.9.

MirOS BSD #10-current           April 15, 2001                               1

Generated on 2014-07-04 21:17:45 by $MirOS: src/scripts/roff2htm,v 1.79 2014/02/10 00:36:11 tg Exp $

These manual pages and other documentation are copyrighted by their respective writers; their source is available at our CVSweb, AnonCVS, and other mirrors. The rest is Copyright © 2002‒2014 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.