MirOS Manual: tek4957(4)


TEK4957(4)          UNIX Programmer's Manual           TEK4957(4)

NAME

     tek4957 - Tektronix 4957 input driver

SYNOPSIS

     Section "InputDevice"
       Identifier "idevname"
       Driver "tek4957"
       Option "Device"   "devpath"
       ...
     EndSection

DESCRIPTION

     tek4957 is an XFree86 input driver for the Tektronix 4957
     tablet.

     The tek4957 driver functions as a pointer input device, and
     may be used as the X server's core pointer.

CONFIGURATION DETAILS

     Please refer to XF86Config(5) for general configuration
     details and for options that can be used with all input
     drivers.  This section only covers configuration details
     specific to this driver.

             Option "Device" "devpath"
                 sets the path to the special file which
                 represents serial line where the tablet is
                 plugged, for example /dev/ttyS0. This option is
                 mandatory.

             Option "DeviceName" "name"
                 sets the name of the X device.

             Option "Speed" "number"
                 sets the sampling rate, from 1 to 6. Default is
                 6, maximum speed.

             Option "Resolution" "number"
                 sets the resolution.
                     0 : 2340 dots  : 1/200 inch
                     1 : 2972 dots  : 1/10 mm
                     2 : 11700 dots : 1/1000 inch
                     3 : 11887 dots : 1/40 mm
                     4 : 5850 dots  : 1/500 inch
                     5 : 5944 dots  : 1/20 mm : default
                     6 : 4680 dots  : 1/400 inch
                     7 : 1170 dots  : 1/100 inch
                     8 : 12 dots    : 1 inch
                     9 : 24 dots    : 1/2 inch

             Option "TopX" "number"
                 X coordinate of the top corner of the active

XFree86                   Version 4.5.0                         1

TEK4957(4)          UNIX Programmer's Manual           TEK4957(4)

                 zone. ( Default = 0 )

             Option "TopY" "number"
                 Y coordinate of the top corner of the active
                 zone. ( Default = 0 )

             Option "BottomX" "Inumber"
                 X coordinate of the bottom corner of the active
                 zone. ( Default = full scale )

             Option "BottomY" "number"
                 Y coordinate of the bottom corner of the active
                 zone. ( Default = full scale )

BUGS / LIMITATIONS
     Currently, only "Absolute" mode is supported ( Sorry )

SEE ALSO

     XFree86(1), XF86Config(5), xf86config(1), Xserver(1), X(7).

AUTHORS

     Olivier DANET <odanet@caramail.com>

XFree86                   Version 4.5.0                         2

Generated on 2014-04-02 20:57:59 by $MirOS: src/scripts/roff2htm,v 1.79 2014/02/10 00:36:11 tg Exp $

These manual pages and other documentation are copyrighted by their respective writers; their source is available at our CVSweb, AnonCVS, and other mirrors. The rest is Copyright © 2002‒2014 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.