MirOS Manual: pf(4)

PF(4)                      BSD Programmer's Manual                       PF(4)

NAME

     pf - packet filter

SYNOPSIS

     pseudo-device pf

DESCRIPTION

     Packet filtering takes place in the kernel. A pseudo-device, /dev/pf, al-
     lows userland processes to control the behavior of the packet filter
     through an ioctl(2) interface. There are commands to enable and disable
     the filter, load rulesets, add and remove individual rules or state table
     entries, and retrieve statistics. The most commonly used functions are
     covered by pfctl(8).

     Manipulations like loading a ruleset that involve more than a single
     ioctl call require a so-called ticket, which prevents the occurrence of
     multiple concurrent manipulations.

     Fields of ioctl parameter structures that refer to packet data (like ad-
     dresses and ports) are generally expected in network byte-order.

IOCTL INTERFACE

     pf supports the following ioctl(2) commands, available through
     <net/pfvar.h>:

     DIOCSTART
             Start the packet filter.

     DIOCSTOP
             Stop the packet filter.

     DIOCSTARTALTQ
             Start the ALTQ bandwidth control system (see altq(9)).

     DIOCSTOPALTQ
             Stop the ALTQ bandwidth control system.

     DIOCBEGINADDRS struct pfioc_pooladdr

             struct pfioc_pooladdr {
                     u_int32_t               action;
                     u_int32_t               ticket;
                     u_int32_t               nr;
                     u_int32_t               r_num;
                     u_int8_t                r_action;
                     u_int8_t                r_last;
                     u_int8_t                af;
                     char                    anchor[PF_ANCHOR_NAME_SIZE];
                     char                    ruleset[PF_RULESET_NAME_SIZE];
                     struct pf_pooladdr      addr;
             };

             Clear the buffer address pool and get a ticket for subsequent
             DIOCADDADDR, DIOCADDRULE, and DIOCCHANGERULE calls.

     DIOCADDADDR struct pfioc_pooladdr

             Add the pool address addr to the buffer address pool to be used
             in the following DIOCADDRULE or DIOCCHANGERULE call. All other
             members of the structure are ignored.

     DIOCADDRULE struct pfioc_rule

             struct pfioc_rule {
                     u_int32_t       action;
                     u_int32_t       ticket;
                     u_int32_t       pool_ticket;
                     u_int32_t       nr;
                     char            anchor[PF_ANCHOR_NAME_SIZE];
                     char            ruleset[PF_RULESET_NAME_SIZE];
                     struct pf_rule  rule;
             };

             Add rule at the end of the inactive ruleset. This call requires a
             ticket obtained through a preceding DIOCXBEGIN call and a
             pool_ticket obtained through a DIOCBEGINADDRS call. DIOCADDADDR
             must also be called if any pool addresses are required. The op-
             tional anchor and ruleset names indicate the anchor and ruleset
             in which to append the rule. nr and action are ignored.

     DIOCADDALTQ struct pfioc_altq
             Add an ALTQ discipline or queue.

             struct pfioc_altq {
                     u_int32_t       action;
                     u_int32_t       ticket;
                     u_int32_t       nr;
                     struct pf_altq  altq;
             };

     DIOCGETRULES struct pfioc_rule
             Get a ticket for subsequent DIOCGETRULE calls and the number nr
             of rules in the active ruleset.

     DIOCGETRULE struct pfioc_rule
             Get a rule by its number nr using the ticket obtained through a
             preceding DIOCGETRULES call.

     DIOCGETADDRS struct pfioc_pooladdr
             Get a ticket for subsequent DIOCGETADDR calls and the number nr
             of pool addresses in the rule specified with r_action, r_num,
             anchor, and ruleset.

     DIOCGETADDR struct pfioc_pooladdr
             Get the pool address addr by its number nr from the rule speci-
             fied with r_action, r_num, anchor, and ruleset using the ticket
             obtained through a preceding DIOCGETADDRS call.

     DIOCGETALTQS struct pfioc_altq
             Get a ticket for subsequent DIOCGETALTQ calls and the number nr
             of queues in the active list.

     DIOCGETALTQ struct pfioc_altq
             Get the queueing discipline altq by its number nr using a ticket
             obtained through a preceding DIOCGETALTQS call.

     DIOCGETQSTATS struct pfioc_qstats
             Get the statistics on a queue.

             struct pfioc_qstats {
                     u_int32_t        ticket;
                     u_int32_t        nr;
                     void            *buf;
                     int              nbytes;
                     u_int8_t         scheduler;
             };

             This call fills in a pointer to the buffer of statistics buf, of
             length nbytes, for the queue specified by nr.

     DIOCADDSTATE struct pfioc_state
             Add a state entry.

             struct pfioc_state {
                     u_int32_t        nr;
                     struct pf_state  state;
             };

     DIOCGETSTATE struct pfioc_state
             Extract the entry with the specified number nr from the state
             table.

     DIOCKILLSTATES struct pfioc_state_kill
             Remove matching entries from the state table. This call returns
             the number of killed states in psk_af.

             struct pfioc_state_kill {
                     sa_family_t             psk_af;
                     int                     psk_proto;
                     struct pf_rule_addr     psk_src;
                     struct pf_rule_addr     psk_dst;
                     char                    psk_ifname[IFNAMSIZ];
             };

     DIOCCLRSTATES struct pfioc_state_kill
             Clear all states. It works like DIOCKILLSTATES, but ignores the
             psk_af, psk_proto, psk_src, and psk_dst fields of the
             pfioc_state_kill structure.

     DIOCSETSTATUSIF struct pfioc_if
             Specify the interface for which statistics are accumulated.

             struct pfioc_if {
                     char             ifname[IFNAMSIZ];
             };

     DIOCGETSTATUS struct pf_status
             Get the internal packet filter statistics.

             struct pf_status {
                     u_int64_t       counters[PFRES_MAX];
                     u_int64_t       fcounters[FCNT_MAX];
                     u_int64_t       scounters[SCNT_MAX];
                     u_int64_t       pcounters[2][2][3];
                     u_int64_t       bcounters[2][2];
                     u_int64_t       stateid;
                     u_int32_t       running;
                     u_int32_t       states;
                     u_int32_t       src_nodes;
                     u_int32_t       since;
                     u_int32_t       debug;
                     u_int32_t       hostid;
                     char            ifname[IFNAMSIZ];
             };

     DIOCCLRSTATUS
             Clear the internal packet filter statistics.

     DIOCNATLOOK struct pfioc_natlook
             Look up a state table entry by source and destination addresses
             and ports.

             struct pfioc_natlook {
                     struct pf_addr   saddr;
                     struct pf_addr   daddr;
                     struct pf_addr   rsaddr;
                     struct pf_addr   rdaddr;
                     u_int16_t        sport;
                     u_int16_t        dport;
                     u_int16_t        rsport;
                     u_int16_t        rdport;
                     sa_family_t      af;
                     u_int8_t         proto;
                     u_int8_t         direction;
             };

     DIOCSETDEBUG u_int32_t
             Set the debug level.

             enum    { PF_DEBUG_NONE, PF_DEBUG_URGENT, PF_DEBUG_MISC,
                       PF_DEBUG_NOISY };

     DIOCGETSTATES struct pfioc_states
             Get state table entries.

             struct pfioc_states {
                     int     ps_len;
                     union {
                             caddr_t psu_buf;
                             struct pf_state *psu_states;
                     } ps_u;
             #define ps_buf          ps_u.psu_buf
             #define ps_states       ps_u.psu_states
             };

             If ps_len is zero, all states will be gathered into pf_states and
             ps_len will be set to the size they take in memory (i.e.,
             sizeof(struct pf_state) * nr). If ps_len is non-zero, as many
             states that can fit into ps_len as possible will be gathered, and
             ps_len will be updated to the size those rules take in memory.

     DIOCCHANGERULE struct pfioc_rule
             Add or remove the rule in the ruleset specified by rule.action.

             The type of operation to be performed is indicated by action,
             which can be any of the following:

             enum    { PF_CHANGE_NONE, PF_CHANGE_ADD_HEAD, PF_CHANGE_ADD_TAIL,
                       PF_CHANGE_ADD_BEFORE, PF_CHANGE_ADD_AFTER,
                       PF_CHANGE_REMOVE, PF_CHANGE_GET_TICKET };

             ticket must be set to the value obtained with
             PF_CHANGE_GET_TICKET for all actions except PF_CHANGE_GET_TICKET.
             pool_ticket must be set to the value obtained with the
             DIOCBEGINADDRS call for all actions except PF_CHANGE_REMOVE and
             PF_CHANGE_GET_TICKET.

             anchor and ruleset indicate to which anchor and ruleset the
             operation applies. nr indicates the rule number against which
             PF_CHANGE_ADD_BEFORE, PF_CHANGE_ADD_AFTER, or PF_CHANGE_REMOVE
             actions are applied.

     DIOCCHANGEADDR struct pfioc_pooladdr
             Add or remove the pool address addr from the rule specified by
             r_action, r_num, anchor, and ruleset.

     DIOCSETTIMEOUT struct pfioc_tm

             struct pfioc_tm {
                     int              timeout;
                     int              seconds;
             };

             Set the state timeout of timeout to seconds. The old value will
             be placed into seconds. For possible values of timeout, consult
             the PFTM_* values in <net/pfvar.h>.

     DIOCGETTIMEOUT struct pfioc_tm
             Get the state timeout of timeout. The value will be placed into
             the seconds field.

     DIOCCLRRULECTRS
             Clear per-rule statistics.

     DIOCSETLIMIT struct pfioc_limit
             Set the hard limits on the memory pools used by the packet
             filter.

             struct pfioc_limit {
                     int             index;
                     unsigned        limit;
             };

             enum { PF_LIMIT_STATES, PF_LIMIT_SRC_NODES, PF_LIMIT_FRAGS };

     DIOCGETLIMIT struct pfioc_limit
             Get the hard limit for the memory pool indicated by index.

     DIOCRCLRTABLES struct pfioc_table
             Clear all tables. All the ioctls that manipulate radix tables use
             the same structure described below. For DIOCRCLRTABLES,
             pfrio_ndel contains on exit the number of tables deleted.

             struct pfioc_table {
                     struct pfr_table         pfrio_table;
                     void                    *pfrio_buffer;
                     int                      pfrio_esize;
                     int                      pfrio_size;
                     int                      pfrio_size2;
                     int                      pfrio_nadd;
                     int                      pfrio_ndel;
                     int                      pfrio_nchange;
                     int                      pfrio_flags;
                     u_int32_t                pfrio_ticket;
             };
             #define pfrio_exists    pfrio_nadd
             #define pfrio_nzero     pfrio_nadd
             #define pfrio_nmatch    pfrio_nadd
             #define pfrio_naddr     pfrio_size2
             #define pfrio_setflag   pfrio_size2
             #define pfrio_clrflag   pfrio_nadd

     DIOCRADDTABLES struct pfioc_table
             Create one or more tables. On entry, pfrio_buffer[pfrio_size]
             contains a table of pfr_table structures. On exit, pfrio_nadd
             contains the number of tables effectively created.

             struct pfr_table {
                     char            pfrt_anchor[PF_ANCHOR_NAME_SIZE];
                     char            pfrt_ruleset[PF_RULESET_NAME_SIZE];
                     char            pfrt_name[PF_TABLE_NAME_SIZE];
                     u_int32_t       pfrt_flags;
                     u_int8_t        pfrt_fback;
             };

     DIOCRDELTABLES struct pfioc_table
             Delete one or more tables. On entry, pfrio_buffer[pfrio_size]
             contains a table of pfr_table structures. On exit, pfrio_nadd
             contains the number of tables effectively deleted.

     DIOCRGETTABLES struct pfioc_table
             Get the list of all tables. On entry, pfrio_buffer[pfrio_size]
             contains a valid writeable buffer for pfr_table structures. On
             exit, pfrio_size contains the number of tables written into the
             buffer. If the buffer is too small, the kernel does not store
             anything but just returns the required buffer size, without er-
             ror.

     DIOCRGETTSTATS struct pfioc_table
             This call is like DIOCRGETTABLES but is used to get an array of
             pfr_tstats structures.

             struct pfr_tstats {
                     struct pfr_table pfrts_t;
                     u_int64_t        pfrts_packets
                                          [PFR_DIR_MAX][PFR_OP_TABLE_MAX];
                     u_int64_t        pfrts_bytes
                                          [PFR_DIR_MAX][PFR_OP_TABLE_MAX];
                     u_int64_t        pfrts_match;
                     u_int64_t        pfrts_nomatch;
                     long             pfrts_tzero;
                     int              pfrts_cnt;
                     int              pfrts_refcnt[PFR_REFCNT_MAX];
             };
             #define pfrts_name       pfrts_t.pfrt_name
             #define pfrts_flags      pfrts_t.pfrt_flags

     DIOCRCLRTSTATS struct pfioc_table
             Clear the statistics of one or more tables. On entry,
             pfrio_buffer[pfrio_size] contains a table of pfr_table struc-
             tures. On exit, pfrio_nzero contains the number of tables effec-
             tively cleared.

     DIOCRCLRADDRS struct pfioc_table
             Clear all addresses in a table. On entry, pfrio_table contains
             the table to clear. On exit, pfrio_ndel contains the number of
             addresses removed.

     DIOCRADDADDRS struct pfioc_table
             Add one or more addresses to a table. On entry, pfrio_table con-
             tains the table ID and pfrio_buffer[pfrio_size] contains the list
             of pfr_addr structures to add. On exit, pfrio_nadd contains the
             number of addresses effectively added.

             struct pfr_addr {
                     union {
                             struct in_addr   _pfra_ip4addr;
                             struct in6_addr  _pfra_ip6addr;
                     }                pfra_u;
                     u_int8_t         pfra_af;
                     u_int8_t         pfra_net;
                     u_int8_t         pfra_not;
                     u_int8_t         pfra_fback;
             };
             #define pfra_ip4addr    pfra_u._pfra_ip4addr
             #define pfra_ip6addr    pfra_u._pfra_ip6addr

     DIOCRDELADDRS struct pfioc_table
             Delete one or more addresses from a table. On entry, pfrio_table
             contains the table ID and pfrio_buffer[pfrio_size] contains the
             list of pfr_addr structures to delete. On exit, pfrio_ndel con-
             tains the number of addresses effectively deleted.

     DIOCRSETADDRS struct pfioc_table
             Replace the content of a table by a new address list. This is the
             most complicated command, which uses all the structure members.

             On entry, pfrio_table contains the table ID and
             pfrio_buffer[pfrio_size] contains the new list of pfr_addr struc-
             tures. Additionally, if pfrio_size2 is non-zero,
             pfrio_buffer[pfrio_size..pfrio_size2] must be a writeable buffer,
             into which the kernel can copy the addresses that have been
             deleted during the replace operation. On exit, pfrio_ndel,
             pfrio_nadd, and pfrio_nchange contain the number of addresses
             deleted, added, and changed by the kernel. If pfrio_size2 was set
             on entry, pfrio_size2 will point to the size of the buffer used,
             exactly like DIOCRGETADDRS.

     DIOCRGETADDRS struct pfioc_table
             Get all the addresses of a table. On entry, pfrio_table contains
             the table ID and pfrio_buffer[pfrio_size] contains a valid write-
             able buffer for pfr_addr structures. On exit, pfrio_size contains
             the number of addresses written into the buffer. If the buffer
             was too small, the kernel does not store anything but just re-
             turns the required buffer size, without returning an error.

     DIOCRGETASTATS struct pfioc_table
             This call is like DIOCRGETADDRS but is used to get an array of
             pfr_astats structures.

             struct pfr_astats {
                     struct pfr_addr  pfras_a;
                     u_int64_t        pfras_packets
                                          [PFR_DIR_MAX][PFR_OP_ADDR_MAX];
                     u_int64_t        pfras_bytes
                                          [PFR_DIR_MAX][PFR_OP_ADDR_MAX];
                     long             pfras_tzero;
             };

     DIOCRCLRASTATS struct pfioc_table
             Clear the statistics of one or more addresses. On entry,
             pfrio_table contains the table ID and pfrio_buffer[pfrio_size]
             contains a table of pfr_addr structures to clear. On exit,
             pfrio_nzero contains the number of addresses effectively cleared.

     DIOCRTSTADDRS struct pfioc_table
             Test if the given addresses match a table. On entry, pfrio_table
             contains the table ID and pfrio_buffer[pfrio_size] contains a
             table of pfr_addr structures to test. On exit, the kernel updates
             the pfr_addr table by setting the pfra_fback member appropriate-
             ly.

     DIOCRSETTFLAGS struct pfioc_table
             Change the PFR_TFLAG_CONST or PFR_TFLAG_PERSIST flags of a table.
             On entry, pfrio_buffer[pfrio_size] contains a table of pfr_table
             structures, and pfrio_setflag contains the flags to add, while
             pfrio_clrflag contains the flags to remove. On exit,
             pfrio_nchange and pfrio_ndel contain the number of tables altered
             or deleted by the kernel. Yes, tables can be deleted if one re-
             moves the PFR_TFLAG_PERSIST flag of an unreferenced table.

     DIOCRINADEFINE struct pfioc_table
             Defines a table in the inactive set. On entry, pfrio_table con-
             tains the table ID and pfrio_buffer[pfrio_size] contains the list
             of pfr_addr structures to put in the table. A valid ticket must
             also be supplied to pfrio_ticket. On exit, pfrio_nadd contains 0
             if the table was already defined in the inactive list, or 1 if a
             new table has been created. pfrio_naddr contains the number of
             addresses effectively put in the table.

     DIOCXBEGIN struct pfioc_trans

             #define PF_RULESET_ALTQ         (PF_RULESET_MAX)
             #define PF_RULESET_TABLE        (PF_RULESET_MAX+1)
             struct pfioc_trans {
                     int              size;  /* number of elements */
                     int              esize; /* size of each element in bytes */
                     struct pfioc_trans_e {
                             int             rs_num;
                             char            anchor[PF_ANCHOR_NAME_SIZE];
                             char            ruleset[PF_RULESET_NAME_SIZE];
                             u_int32_t       ticket;
                     }               *array;
             };

             Clear all the inactive rulesets specified in the pfioc_trans_e
             array. For each ruleset, a ticket is returned for subsequent "add
             rule" ioctls, as well as for the DIOCXCOMMIT and DIOCXROLLBACK
             calls.

     DIOCXCOMMIT struct pfioc_trans
             Atomically switch a vector of inactive rulesets to the active ru-
             lesets. This call is implemented as a standard two-phase commit,
             which will either fail for all rulesets or completely succeed.
             All tickets need to be valid. Returns EBUSY if a concurrent pro-
             cess is trying to update some of the same rulesets concurrently.

     DIOCXROLLBACK struct pfioc_trans
             Clean up the kernel by undoing all changes that have taken place
             on the inactive rulesets since the last DIOCXBEGIN. DIOCXROLLBACK
             will silently ignore rulesets for which the ticket is invalid.

     DIOCOSFPFLUSH
             Flush the passive OS fingerprint table.

     DIOCOSFPADD struct pf_osfp_ioctl

             struct pf_osfp_ioctl {
                     struct pf_osfp_entry {
                             SLIST_ENTRY(pf_osfp_entry) fp_entry;
                             pf_osfp_t               fp_os;
                             char                    fp_class_nm[PF_OSFP_LEN];
                             char                    fp_version_nm[PF_OSFP_LEN];
                             char                    fp_subtype_nm[PF_OSFP_LEN];
                     }                       fp_os;
                     pf_tcpopts_t            fp_tcpopts;
                     u_int16_t               fp_wsize;
                     u_int16_t               fp_psize;
                     u_int16_t               fp_mss;
                     u_int16_t               fp_flags;
                     u_int8_t                fp_optcnt;
                     u_int8_t                fp_wscale;
                     u_int8_t                fp_ttl;
                     int                     fp_getnum;
             };

             Add a passive OS fingerprint to the table. Set fp_os.fp_os to the
             packed fingerprint, fp_os.fp_class_nm to the name of the class
             (Linux, Windows, etc), fp_os.fp_version_nm to the name of the
             version (NT, 95, 98), and fp_os.fp_subtype_nm to the name of the
             subtype or patchlevel. The members fp_mss, fp_wsize, fp_psize,
             fp_ttl, fp_optcnt, and fp_wscale are set to the TCP MSS, the TCP
             window size, the IP length, the IP TTL, the number of TCP op-
             tions, and the TCP window scaling constant of the TCP SYN packet,
             respectively.

             The fp_flags member is filled according to the <net/pfvar.h> in-
             clude file PF_OSFP_* defines. The fp_tcpopts member contains
             packed TCP options. Each option uses PF_OSFP_TCPOPT_BITS bits in
             the packed value. Options include any of PF_OSFP_TCPOPT_NOP,
             PF_OSFP_TCPOPT_SACK, PF_OSFP_TCPOPT_WSCALE, PF_OSFP_TCPOPT_MSS,
             or PF_OSFP_TCPOPT_TS.

             The fp_getnum member is not used with this ioctl.

             The structure's slack space must be zeroed for correct operation;
             memset(3) the whole structure to zero before filling and sending
             to the kernel.

     DIOCOSFPGET struct pf_osfp_ioctl
             Get the passive OS fingerprint number fp_getnum from the kernel's
             fingerprint list. The rest of the structure members will come
             back filled. Get the whole list by repeatedly incrementing the
             fp_getnum number until the ioctl returns EBUSY.

     DIOCGETSRCNODES struct pfioc_src_nodes

             struct pfioc_src_nodes {
                     int     psn_len;
                     union {
                             caddr_t         psu_buf;
                             struct pf_src_node      *psu_src_nodes;
                     } psn_u;
             #define psn_buf         psn_u.psu_buf
             #define psn_src_nodes   psn_u.psu_src_nodes
             };

             Get the list of source nodes kept by sticky addresses and source
             tracking. The ioctl must be called once with psn_len set to 0. If
             the ioctl returns without error, psn_len will be set to the size
             of the buffer required to hold all the pf_src_node structures
             held in the table. A buffer of this size should then be allocat-
             ed, and a pointer to this buffer placed in psn_buf. The ioctl
             must then be called again to fill this buffer with the actual
             source node data. After that call, psn_len will be set to the
             length of the buffer actually used.

     DIOCCLRSRCNODES
             Clear the tree of source tracking nodes.

     DIOCIGETIFACES struct pfioc_iface
             Get the list of interfaces and interface drivers known to pf. All
             the ioctls that manipulate interfaces use the same structure
             described below:

             struct pfioc_iface {
                     char                     pfiio_name[IFNAMSIZ];
                     void                    *pfiio_buffer;
                     int                      pfiio_esize;
                     int                      pfiio_size;
                     int                      pfiio_nzero;
                     int                      pfiio_flags;
             };

             #define PFI_FLAG_GROUP     0x0001  /* gets groups of interfaces */
             #define PFI_FLAG_INSTANCE  0x0002  /* gets single interfaces */
             #define PFI_FLAG_ALLMASK   0x0003

             If not empty, pfiio_name can be used to restrict the search to a
             specific interface or driver. pfiio_buffer[pfiio_size] is the
             user-supplied buffer for returning the data. On entry, pfiio_size
             represents the number of pfi_if entries that can fit into the
             buffer. The kernel will replace this value by the real number of
             entries it wants to return. pfiio_esize should be set to
             sizeof(struct pfi_if). pfiio_flags should be set to
             PFI_FLAG_GROUP, PFI_FLAG_INSTANCE, or both, to tell the kernel to
             return a group of interfaces (drivers, like "fxp"), real inter-
             face instances (like "fxp1") or both. The data is returned in the
             pfi_if structure described below:

             struct pfi_if {
                     char                             pfif_name[IFNAMSIZ];
                     u_int64_t                        pfif_packets[2][2][2];
                     u_int64_t                        pfif_bytes[2][2][2];
                     u_int64_t                        pfif_addcnt;
                     u_int64_t                        pfif_delcnt;
                     long                             pfif_tzero;
                     int                              pfif_states;
                     int                              pfif_rules;
                     int                              pfif_flags;
             };

             #define PFI_IFLAG_GROUP         0x0001  /* group of interfaces */
             #define PFI_IFLAG_INSTANCE      0x0002  /* single instance */
             #define PFI_IFLAG_CLONABLE      0x0010  /* clonable group */
             #define PFI_IFLAG_DYNAMIC       0x0020  /* dynamic group */
             #define PFI_IFLAG_ATTACHED      0x0040  /* interface attached */

     DIOCICLRISTATS struct pfioc_iface
             Clear the statistics counters of one or more interfaces.
             pfiio_name and pfiio_flags can be used to select which interfaces
             need to be cleared. The filtering process is the same as for
             DIOCIGETIFACES. pfiio_nzero will be set by the kernel to the
             number of interfaces and drivers that have been cleared.

FILES

     /dev/pf  packet filtering device.

EXAMPLES

     The following example demonstrates how to use the DIOCNATLOOK command to
     find the internal host/port of a NATed connection:

     #include <sys/types.h>
     #include <sys/socket.h>
     #include <sys/ioctl.h>
     #include <sys/fcntl.h>
     #include <net/if.h>
     #include <netinet/in.h>
     #include <net/pfvar.h>
     #include <err.h>
     #include <stdio.h>
     #include <stdlib.h>

     u_int32_t
     read_address(const char *s)
     {
             int a, b, c, d;

             sscanf(s, "%i.%i.%i.%i", &a, &b, &c, &d);
             return htonl(a << 24 | b << 16 | c << 8 | d);
     }

     void
     print_address(u_int32_t a)
     {
             a = ntohl(a);
             printf("%d.%d.%d.%d", a >> 24 & 255, a >> 16 & 255,
                 a >> 8 & 255, a & 255);
     }

     int
     main(int argc, char *argv[])
     {
             struct pfioc_natlook nl;
             int dev;

             if (argc != 5) {
                     printf("%s <gwy addr> <gwy port> <ext addr> <ext port>\n",
                         argv[0]);
                     return 1;
             }

             dev = open("/dev/pf", O_RDWR);
             if (dev == -1)
                     err(1, "open(\"/dev/pf\") failed");

             memset(&nl, 0, sizeof(struct pfioc_natlook));
             nl.saddr.v4.s_addr      = read_address(argv[1]);
             nl.sport                = htons(atoi(argv[2]));
             nl.daddr.v4.s_addr      = read_address(argv[3]);
             nl.dport                = htons(atoi(argv[4]));
             nl.af                   = AF_INET;
             nl.proto                = IPPROTO_TCP;
             nl.direction            = PF_IN;

             if (ioctl(dev, DIOCNATLOOK, &nl))
                     err(1, "DIOCNATLOOK");

             printf("internal host ");
             print_address(nl.rsaddr.v4.s_addr);
             printf(":%u\n", ntohs(nl.rsport));
             return 0;
     }

SEE ALSO

     ioctl(2), bridge(4), pflog(4), pfsync(4), pfctl(8), altq(9)

HISTORY

     The pf packet filtering mechanism first appeared in OpenBSD 3.0.

MirOS BSD #10-current           June 24, 2001                               10

Generated on 2014-07-04 21:17:45 by $MirOS: src/scripts/roff2htm,v 1.79 2014/02/10 00:36:11 tg Exp $

These manual pages and other documentation are copyrighted by their respective writers; their source is available at our CVSweb, AnonCVS, and other mirrors. The rest is Copyright © 2002‒2014 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.