MirOS Manual: ioprbs(4)

IOPRBS(4)                  BSD Programmer's Manual                   IOPRBS(4)

NAME

     ioprbs - I2O random block storage

SYNOPSIS

     ioprbs* at iop? tid ?
     scsibus* at ioprbs?

DESCRIPTION

     The ioprbs driver provides support for I2O random block storages, like
     RAID-sets. So far only the following adapters has been tested:

           Adaptec 2100S
           Adaptec 2110S
           Adaptec 3200S

     Although only those two adapters have been tested, the I2O interface is a
     generic one, and the driver should cope with all I2O random block
     storages with no further adaptions.

     The storage is presented to the system as SCSI disks for uniformity with
     other RAID controllers we support. All RAID configuration is done through
     the controllers' BIOSes.

SEE ALSO

     intro(4), iop(4), iopsp(4), scsi(4)

HISTORY

     The ioprbs driver first appeared in OpenBSD 3.0.

AUTHORS

     The ioprbs driver was written by Niklas Hallqvist <niklas@openbsd.org>,
     inspired by the NetBSD ld_iop driver by
     Andrew Doran <ad@netbsd.org>.

MirOS BSD #10-current            July 4, 2001                                1

Generated on 2014-07-04 21:17:45 by $MirOS: src/scripts/roff2htm,v 1.79 2014/02/10 00:36:11 tg Exp $

These manual pages and other documentation are copyrighted by their respective writers; their source is available at our CVSweb, AnonCVS, and other mirrors. The rest is Copyright © 2002‒2014 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.