DAIC(4) BSD Programmer's Manual DAIC(4)
daic - isdn4bsd driver for EICON.Diehl active ISDN cards
daic0 at isa? iomem 0xd8000 irq 10
The daic driver supports the old Diehl active cards: S, SX, SXn, SCOM and QUADRO. For a QUADRO card, the driver will detect the board type and use all four ports, each attached as a controller of its own to the isdn4bsd system, which can be listed using the daicctl utility. The daic driver interfaces the ISDN card to the ISDN4BSD kernel subsys- tem. All lower layer ISDN control is handled by the card. This should al- low you to run any national ISDN protocol delivered by EICON.Diehl for your card, but the driver has only been tested with the DSS1 protocol and some parts of the cards interface are ISDN protocol dependent. The daic driver is written to conform to the software interface document- ed by Diehl in their ISDN-Karten Benutzerhandbuch from 1992.
Every active card needs its own operating software before it can work. You have to download this to the card before using it with isdn4bsd. Use the daicctl utility to do this, i.e. call daicctl -d te_etsi.sx 1 to download the file te_etsi.sx to controller number 1. Use daicctl -l to list all available controllers (and ports). You have to select the correct ISDN protocol file for your ISDN interface, see the Diehl docu- mentation for details. The cards bootstrap process involves another file, which is independent of the card type you use and the protocol you run. It is called download.bin in current versions of the Diehl software distribution and has to be copied to the kernel compile directory under dev/microcode/daic and converted into a header file used when compiling the kernel by run- ning make in that directory. Your kernel compile will fail and remind you of this if you forget to do this. Due to copyright restrictions we cannot distribute the driver with this file integrated. But if you own a card, you do have the file (or can get it from the Diehl web server).
The driver is not yet finished. MirOS BSD #10-current January 30, 1998 1
Generated on 2015-04-13 10:26:13 by $MirOS: src/scripts/roff2htm,v 1.80 2015/01/02 13:54:19 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002–2015 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.