MirOS Manual: cy(4)

CY(4)                      BSD Programmer's Manual                       CY(4)

NAME

     cy - Cyclades Cyclom-{4, 8, 16}Y asynchronous comms board device driver

SYNOPSIS

     cy0 at isa? iomem 0xd4000 irq 12
     cy* at pci?

DESCRIPTION

     This driver provides an interface to Cyclades Cyclom-4Y, Cyclom-8Y and
     Cyclom-16Y asynchronous multiport serial boards. These boards are based
     around Cirrus Logic CD1400 communication controllers.

     The device minor numbers for this driver are encoded as follows:

         d c c u u u u u     - bits in the minor device number

         bits    meaning
         ----    -------
         uuuuu   physical serial line (i.e., unit) to use
                     0-7 on a cyclom-8Y, 0-15 on a cyclom-16Y

         cc      card number

         d       dial-out flag

DIAGNOSTICS

     cy%d: tty input queue overflow  Incoming characters have been discarded
     due to a buffer overflow. This is caused by the process in control of the
     device not read(2)'ing characters fast enough.

     cy%d: receive fifo overrun  Incoming characters have been discarded due
     to a CD1400 channel overrun. This is caused by interrupts not being ser-
     viced sufficiently quickly to prevent the 12 byte receive FIFO on a seri-
     al channel from overflowing. Reducing the value of the RxFifoThreshold
     #define from 8 to something smaller may help slow machines avoid this
     problem. The driver must have been compiled with the LogOverruns option
     defined (the default) in order for this condition to be logged.

SEE ALSO

     com(4), intro(4), isa(4), pci(4), termios(4), tty(4)

HISTORY

     Some ideas for the architecture of this driver's two-layer processing
     model were derived from the fas 2.10 driver by
     Uwe Doering <gemini@geminix.in-berlin.de> and the high-performance com
     driver by
     Bruce Evans <bde@kralizec.zeta.org.au>.

     This work was made possible through the donation of a Cyclom-8Y board by
     the manufacturer, Cyclades Corporation. However, neither Cyclades nor the
     author make any warranties regarding this software, nor guarantees of
     support.

AUTHORS

     The driver was written by Andrew Herbert <andrew@werple.apana.org.au>.

BUGS

     There is currently no BREAK handling - breaks are ignored. There is no
     support for bad-character reporting, except via PARMRK. The Cyclom-[48]Y
     boards do not listen to the RTS signal for receiver flow control. FIFO
     overruns are only logged when the termios IGNPAR setting is enabled.

MirOS BSD #10-current          October 5, 1993                               1

Generated on 2014-07-04 21:17:45 by $MirOS: src/scripts/roff2htm,v 1.79 2014/02/10 00:36:11 tg Exp $

These manual pages and other documentation are copyrighted by their respective writers; their source is available at our CVSweb, AnonCVS, and other mirrors. The rest is Copyright © 2002‒2014 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.