MirOS Manual: cue(4)

CUE(4)                     BSD Programmer's Manual                      CUE(4)

NAME

     cue - CATC USB-EL1201A USB Ethernet driver

SYNOPSIS

     cue* at uhub? port ?

DESCRIPTION

     The cue driver provides support for USB Ethernet adapters based on the
     Computer Access Technology Corporation's USB-EL1202A chipset. This in-
     cludes the following adapters:

           Belkin F5U111
           CATC Netmate
           CATC Netmate II
           SmartBridges SmartLink

     The USB-EL1202A supports a 512-bit multicast hash filter, single perfect
     filter entry for the station address and promiscuous mode. Packets are
     received and transmitted over separate USB bulk transfer endpoints.

     The CATC adapter supports only 10Mbps half-duplex mode, hence there are
     no ifmedia(4) modes to select.

     For more information on configuring this device, see ifconfig(8).

DIAGNOSTICS

     cue%d: watchdog timeout  A packet was queued for transmission and a
     transmit command was issued, however the device failed to acknowledge the
     transmission before a timeout expired.

     cue%d: no memory for rx list  The driver failed to allocate an mbuf for
     the receiver ring.

SEE ALSO

     arp(4), intro(4), netintro(4), usb(4), hostname.if(5), ifconfig(8)

HISTORY

     The cue device driver first appeared in FreeBSD 4.0. OpenBSD support was
     added in OpenBSD 2.7.

AUTHORS

     The cue driver was written by Bill Paul <wpaul@ee.columbia.edu> and port-
     ed to OpenBSD by
     Aaron Campbell <aaron@openbsd.org>.

MirOS BSD #10-current          January 13, 2000                              1

Generated on 2014-07-04 21:17:45 by $MirOS: src/scripts/roff2htm,v 1.79 2014/02/10 00:36:11 tg Exp $

These manual pages and other documentation are copyrighted by their respective writers; their source is available at our CVSweb, AnonCVS, and other mirrors. The rest is Copyright © 2002‒2014 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.