MirOS Manual: audio(4)

AUDIO(4)                   BSD Programmer's Manual                    AUDIO(4)

NAME

     audio - device-independent audio driver layer

SYNOPSIS

     #include <sys/types.h>
     #include <sys/ioctl.h>
     #include <sys/audioio.h>
     #include <string.h>

DESCRIPTION

     The audio driver provides support for various audio peripherals. It pro-
     vides a uniform programming interface layer above different underlying
     audio hardware drivers. The audio layer provides full-duplex operation if
     the underlying hardware configuration supports it.

     There are four device files available for audio operation: /dev/audio,
     /dev/sound, /dev/audioctl, and /dev/mixer. /dev/audio and /dev/sound are
     used for recording or playback of digital samples. /dev/mixer is used to
     manipulate volume, recording source, or other audio mixer functions.
     /dev/audioctl accepts the same ioctl(2) operations as /dev/sound, but no
     other operations. In contrast to /dev/sound, which has the exclusive open
     property, /dev/audioctl can be opened at any time and can be used to
     manipulate the audio device while it is in use.

SAMPLING DEVICES

     When /dev/audio is opened, it automatically directs the underlying driver
     to manipulate monaural 8-bit mu-law samples. In addition, if it is opened
     read-only (write-only) the device is set to half-duplex record (play)
     mode with recording (playing) unpaused and playing (recording) paused.
     When /dev/sound is opened, it maintains the previous audio sample mode
     and record/playback mode. In all other respects /dev/audio and /dev/sound
     are identical.

     Only one process may hold open a sampling device at a given time
     (although file descriptors may be shared between processes once the first
     open completes).

     On a half-duplex device, writes while recording is in progress will be
     immediately discarded. Similarly, reads while playback is in progress
     will be filled with silence but delayed to return at the current sampling
     rate. If both playback and recording are requested on a half-duplex dev-
     ice, playback mode takes precedence and recordings will get silence. On a
     full-duplex device, reads and writes may operate concurrently without in-
     terference. If a full-duplex capable audio device is opened for both
     reading and writing it will start in half-duplex play mode; full-duplex
     mode has to be set explicitly. On either type of device, if the playback
     mode is paused then silence is played instead of the provided samples
     and, if recording is paused, then the process blocks in read(2) until
     recording is unpaused.

     If a writing process does not call write(2) frequently enough to provide
     samples at the pace the hardware consumes them silence is inserted. If
     the AUMODE_PLAY_ALL mode is not set the writing process must provide
     enough data via subsequent write calls to ``catch up'' in time to the
     current audio block before any more process-provided samples will be
     played. If a reading process does not call read(2) frequently enough, it
     will simply miss samples.

     The audio device is normally accessed with read(2) or write(2) calls, but
     it can also be mapped into user memory with mmap(2) (when supported by
     the device). Once the device has been mapped it can no longer be accessed
     by read or write; all access is by reading and writing to the mapped
     memory. The device appears as a block of memory of size buffer_size (as
     available via AUDIO_GETINFO). The device driver will continuously move
     data from this buffer from/to the audio hardware, wrapping around at the
     end of the buffer. To find out where the hardware is currently accessing
     data in the buffer the AUDIO_GETIOFFS and AUDIO_GETOOFFS calls can be
     used. The playing and recording buffers are distinct and must be mapped
     separately if both are to be used. Only encodings that are not emulated
     (i.e., where AUDIO_ENCODINGFLAG_EMULATED is not set) work properly for a
     mapped device.

     The audio device, like most devices, can be used in select, can be set in
     non-blocking mode and can be set to send a SIGIO when I/O is possible.
     The mixer device can be set to generate a SIGIO whenever a mixer value is
     changed.

     The following ioctl(2) commands are supported on the sample devices:

     AUDIO_FLUSH
             This command stops all playback and recording, clears all queued
             buffers, resets error counters, and restarts recording and play-
             back as appropriate for the current sampling mode.
     AUDIO_RERROR (int)
             This command fetches the count of dropped input samples into its
             integer argument. There is no information regarding when in the
             sample stream they were dropped.
     AUDIO_WSEEK (int)
             This command fetches the count of samples queued ahead of the
             first sample in the most recent sample block written into its in-
             teger argument.
     AUDIO_DRAIN
             This command suspends the calling process until all queued play-
             back samples have been played by the hardware.
     AUDIO_GETDEV (audio_device_t)
             This command fetches the current hardware device information into
             the audio_device_t argument.

             typedef struct audio_device {
                     char name[MAX_AUDIO_DEV_LEN];
                     char version[MAX_AUDIO_DEV_LEN];
                     char config[MAX_AUDIO_DEV_LEN];
             } audio_device_t;
     AUDIO_GETFD (int)
             This command returns the current setting of the full-duplex mode.
     AUDIO_GETENC (audio_encoding_t)
             This command is used iteratively to fetch sample encoding names
             and format_ids into the input/output audio_encoding_t argument.

             typedef struct audio_encoding {
                     int index;      /* input: nth encoding */
                     char name[MAX_AUDIO_DEV_LEN]; /* name of encoding */
                     int encoding;   /* value for encoding parameter */
                     int precision;  /* value for precision parameter */
                     int flags;
             #define AUDIO_ENCODINGFLAG_EMULATED 1 /* software emulation mode */
             } audio_encoding_t;
             To query all the supported encodings, start with an index field
             of 0 and continue with successive encodings (1, 2, ...) until the
             command returns an error.
     AUDIO_SETFD (int)
             This command sets the device into full-duplex operation if its
             integer argument has a non-zero value, or into half-duplex opera-
             tion if it contains a zero value. If the device does not support
             full-duplex operation, attempting to set full-duplex mode returns
             an error.
     AUDIO_GETPROPS (int)
             This command gets a bit set of hardware properties. If the
             hardware has a certain property the corresponding bit is set,
             otherwise it is not. The properties can have the following
             values:
             AUDIO_PROP_FULLDUPLEX
                     the device admits full-duplex operation.
             AUDIO_PROP_MMAP
                     the device can be used with mmap(2).
             AUDIO_PROP_INDEPENDENT
                     the device can set the playing and recording encoding
                     parameters independently.
     AUDIO_GETIOFFS (audio_offset_t)
     AUDIO_GETOOFFS (audio_offset_t)
             This command fetches the current offset in the input(output)
             buffer where the hardware is putting (getting) data. It is mostly
             useful when the device buffer is available in user space via the
             mmap(2) call. The information is returned in the audio_offset
             structure.

             typedef struct audio_offset {
                     u_int   samples;   /* Total number of bytes transferred */
                     u_int   deltablks; /* Blocks transferred since last checked */
                     u_int   offset;    /* Physical transfer offset in buffer */
             } audio_offset_t;
     AUDIO_GETINFO (audio_info_t)
     AUDIO_SETINFO (audio_info_t)
             Get or set audio information as encoded in the audio_info struc-
             ture.

             typedef struct audio_info {
                     struct  audio_prinfo play;   /* info for play (output) side */
                     struct  audio_prinfo record; /* info for record (input) side */
                     u_int   monitor_gain;
                     /* BSD extensions */
                     u_int   blocksize;      /* H/W read/write block size */
                     u_int   hiwat;          /* output high water mark */
                     u_int   lowat;          /* output low water mark */
                     u_int   _ispare1;
                     u_int   mode;           /* current device mode */
             #define AUMODE_PLAY     0x01
             #define AUMODE_RECORD   0x02
             #define AUMODE_PLAY_ALL 0x04    /* do not do real-time correction */
             } audio_info_t;

             When setting the current state with AUDIO_SETINFO, the audio_info
             structure should first be initialized with AUDIO_INITINFO (&info)
             and then the particular values to be changed should be set. This
             allows the audio driver to only set those things that you wish to
             change and eliminates the need to query the device with
             AUDIO_GETINFO first.

             The mode field should be set to AUMODE_PLAY, AUMODE_RECORD,
             AUMODE_PLAY_ALL, or a bitwise OR combination of the three. Only
             full-duplex audio devices support simultaneous record and play-
             back.

             hiwat and lowat are used to control write behavior. Writes to the
             audio devices will queue up blocks until the high-water mark is
             reached, at which point any more write calls will block until the
             queue is drained to the low-water mark. hiwat and lowat set those
             high- and low-water marks (in audio blocks). The default for
             hiwat is the maximum value and for lowat 75% of hiwat.

             blocksize sets the current audio blocksize. The generic audio
             driver layer and the hardware driver have the opportunity to ad-
             just this block size to get it within implementation-required
             limits. Upon return from an AUDIO_SETINFO call, the actual block-
             size set is returned in this field. Normally the blocksize is
             calculated to correspond to 50ms of sound and it is recalculated
             when the encoding parameter changes, but if the blocksize is set
             explicitly this value becomes sticky, i.e., it remains even when
             the encoding is changed. The stickiness can be cleared by reopen-
             ing the device or setting the blocksize to 0.

             struct audio_prinfo {
                     u_int   sample_rate;    /* sample rate in samples/s */
                     u_int   channels;       /* number of channels, usually 1 or 2 */
                     u_int   precision;      /* number of bits/sample */
                     u_int   encoding;       /* data encoding (AUDIO_ENCODING_* below) */
                     u_int   gain;           /* volume level */
                     u_int   port;           /* selected I/O port */
                     u_int   seek;           /* BSD extension */
                     u_int   avail_ports;    /* available I/O ports */
                     u_int   buffer_size;    /* total size audio buffer */
                     u_int   _ispare[1];
                     /* Current state of device: */
                     u_int   samples;        /* number of samples */
                     u_int   eof;            /* End Of File (zero-size writes) counter */
                     u_char  pause;          /* non-zero if paused, zero to resume */
                     u_char  error;          /* non-zero if underflow/overflow occurred */
                     u_char  waiting;        /* non-zero if another process hangs in open */
                     u_char  balance;        /* stereo channel balance */
                     u_char  cspare[2];
                     u_char  open;           /* non-zero if currently open */
                     u_char  active;         /* non-zero if I/O is currently active */
             };

             Note:  many hardware audio drivers require identical playback and
             recording sample rates, sample encodings, and channel counts. The
             playing information is always set last and will prevail on such
             hardware. If the hardware can handle different settings the
             AUDIO_PROP_INDEPENDENT property is set.

             The encoding parameter can have the following values:

             AUDIO_ENCODING_ULAW
                     mu-law encoding, 8 bits/sample
             AUDIO_ENCODING_ALAW
                     A-law encoding, 8 bits/sample
             AUDIO_ENCODING_SLINEAR
                     two's complement signed linear encoding with the platform
                     byte order
             AUDIO_ENCODING_ULINEAR
                     unsigned linear encoding with the platform byte order
             AUDIO_ENCODING_ADPCM
                     ADPCM encoding, 8 bits/sample
             AUDIO_ENCODING_SLINEAR_LE
                     two's complement signed linear encoding with little endi-
                     an byte order
             AUDIO_ENCODING_SLINEAR_BE
                     two's complement signed linear encoding with big endian
                     byte order
             AUDIO_ENCODING_ULINEAR_LE
                     unsigned linear encoding with little endian byte order
             AUDIO_ENCODING_ULINEAR_BE
                     unsigned linear encoding with big endian byte order

             The gain, port and balance settings provide simple shortcuts to
             the richer mixer interface described below. The gain should be in
             the range [AUDIO_MIN_GAIN, AUDIO_MAX_GAIN] and the balance in the
             range [AUDIO_LEFT_BALANCE, AUDIO_RIGHT_BALANCE] with the normal
             setting at AUDIO_MID_BALANCE.

             The input port should be a combination of

             AUDIO_MICROPHONE
                     to select microphone input.
             AUDIO_LINE_IN
                     to select line input.
             AUDIO_CD
                     to select CD input.

             The output port should be a combination of

             AUDIO_SPEAKER
                     to select microphone output.
             AUDIO_HEADPHONE
                     to select headphone output.
             AUDIO_LINE_OUT
                     to select line output.

             The available ports can be found in avail_ports.

             buffer_size is the total size of the audio buffer. The buffer
             size divided by the blocksize gives the maximum value for hiwat.
             Currently the buffer_size can only be read and not set.

             The seek and samples fields are only used for AUDIO_GETINFO. seek
             represents the count of samples pending; samples represents the
             total number of bytes recorded or played, less those that were
             dropped due to inadequate consumption/production rates.

             pause returns the current pause/unpause state for recording or
             playback. For AUDIO_SETINFO, if the pause value is specified it
             will either pause or unpause the particular direction.

MIXER DEVICE

     The mixer device, /dev/mixer, may be manipulated with ioctl(2) but does
     not support read(2) or write(2). It supports the following ioctl(2) com-
     mands:

     AUDIO_GETDEV (audio_device_t)
             This command is the same as described above for the sampling dev-
             ices.
     AUDIO_MIXER_READ (mixer_ctrl_t)
     AUDIO_MIXER_WRITE (mixer_ctrl_t)

             #define AUDIO_MIXER_CLASS  0
             #define AUDIO_MIXER_ENUM   1
             #define AUDIO_MIXER_SET    2
             #define AUDIO_MIXER_VALUE  3
             typedef struct mixer_ctrl {
                     int dev;                        /* input: nth device */
                     int type;
                     union {
                             int ord;                /* enum */
                             int mask;               /* set */
                             mixer_level_t value;    /* value */
                     } un;
             } mixer_ctrl_t;

             #define AUDIO_MIN_GAIN  0
             #define AUDIO_MAX_GAIN  255
             typedef struct mixer_level {
                     int num_channels;
                     u_char level[8];                /* [num_channels] */
             } mixer_level_t;
             #define AUDIO_MIXER_LEVEL_MONO  0
             #define AUDIO_MIXER_LEVEL_LEFT  0
             #define AUDIO_MIXER_LEVEL_RIGHT 1

             These commands read the current mixer state or set new mixer
             state for the specified device dev. type identifies which type of
             value is supplied in the mixer_ctrl_t argument. For a mixer
             value, the value field specifies both the number of channels and
             the values for each of the channels. If the channel count does
             not match the current channel count, the attempt to change the
             setting may fail (depending on the hardware device driver imple-
             mentation). For an enumeration value, the ord field should be set
             to one of the possible values as returned by a prior
             AUDIO_MIXER_DEVINFO command. The type AUDIO_MIXER_CLASS is only
             used for classifying particular mixer device types and is not
             used for AUDIO_MIXER_READ or AUDIO_MIXER_WRITE.
     AUDIO_MIXER_DEVINFO (mixer_devinfo_t)
             This command is used iteratively to fetch audio mixer device in-
             formation into the input/output mixer_devinfo_t argument. To
             query all the supported encodings, start with an index field of 0
             and continue with successive encodings (1, 2, ...) until the com-
             mand returns an error.

             typedef struct mixer_devinfo {
                     int index;              /* input: nth mixer device */
                     audio_mixer_name_t label;
                     int type;
                     int mixer_class;
                     int next, prev;
             #define AUDIO_MIXER_LAST        -1
                     union {
                             struct audio_mixer_enum {
                                     int num_mem;
                                     struct {
                                             audio_mixer_name_t label;
                                             int ord;
                                     } member[32];
                             } e;
                             struct audio_mixer_set {
                                     int num_mem;
                                     struct {
                                             audio_mixer_name_t label;
                                             int mask;
                                     } member[32];
                             } s;
                             struct audio_mixer_value {
                                     audio_mixer_name_t units;
                                     int num_channels;
                             } v;
                     } un;
             } mixer_devinfo_t;

             The label field identifies the name of this particular mixer con-
             trol. The index field may be used as the dev field in
             AUDIO_MIXER_READ and AUDIO_MIXER_WRITE commands. The type field
             identifies the type of this mixer control. Enumeration types are
             typically used for on/off style controls (e.g., a mute control)
             or for input/output device selection (e.g., select recording in-
             put source from CD, line in, or microphone). Set types are simi-
             lar to enumeration types but any combination of the mask bits can
             be used.

             The mixer_class field identifies what class of control this is.
             This value is set to the index value used to query the class it-
             self. For example, a mixer level controlling the input gain on
             the ``line in'' circuit would be a class that matches an input
             class device with the name ``Inputs'' (AudioCInputs). Mixer con-
             trols which control audio circuitry for a particular audio source
             (e.g., line-in, CD in, DAC output) are collected under the input
             class, while those which control all audio sources (e.g., master
             volume, equalization controls) are under the output class.

             The next and prev may be used by the hardware device driver to
             provide hints for the next and previous devices in a related set
             (for example, the line in level control would have the line in
             mute as its "next" value). If there is no relevant next or previ-
             ous value, AUDIO_MIXER_LAST is specified.

             For AUDIO_MIXER_ENUM mixer control types, the enumeration values
             and their corresponding names are filled in. For example, a mute
             control would return appropriate values paired with AudioNon and
             AudioNoff. For AUDIO_MIXER_VALUE and AUDIO_MIXER_SET mixer con-
             trol types, the channel count is returned; the units name speci-
             fies what the level controls (typical values are AudioNvolume,
             AudioNtreble, AudioNbass).

     By convention, all the mixer device can be distinguished from other mixer
     controls because they use a name from one of the AudioC* string values.

FILES

     /dev/audio
     /dev/audioctl
     /dev/sound
     /dev/mixer

SEE ALSO

     audioctl(1), mixerctl(1), ioctl(2), ossaudio(3), ac97(4), audio(9)

     For ports using the ISA bus: gus(4), pss(4), sb(4), wss(4)

     For ports using the PCI bus: auich(4), autri(4), auvia(4), clcs(4),
     clct(4), cmpci(4), eap(4), emu(4), esa(4), eso(4), maestro(4), neo(4),
     sv(4)

BUGS

     If the device is used in mmap(2) it is currently always mapped for writ-
     ing (playing) due to VM system weirdness.

MirOS BSD #10-current           March 11, 1997                               6

Generated on 2014-07-04 21:17:45 by $MirOS: src/scripts/roff2htm,v 1.79 2014/02/10 00:36:11 tg Exp $

These manual pages and other documentation are copyrighted by their respective writers; their source is available at our CVSweb, AnonCVS, and other mirrors. The rest is Copyright © 2002‒2014 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.