MirOS Manual: hid_dispose_report_desc(3), hid_end_parse(3), hid_get_data(3), hid_get_item(3), hid_get_report_desc(3), hid_init(3), hid_locate(3), hid_parse_usage_in_page(3), hid_parse_usage_page(3), hid_report_size(3), hid_set_data(3), hid_start(3), hid_start_parse(3), hid_usage_in_page(3), hid_usage_page(3), hid_use_report_desc(3), usbhid(3)

USBHID(3)                  BSD Programmer's Manual                   USBHID(3)


     usbhid, hid_get_report_desc, hid_use_report_desc,
     hid_dispose_report_desc, hid_start_parse, hid_end_parse, hid_get_item,
     hid_report_size, hid_locate, hid_usage_page, hid_usage_in_page,
     hid_start, hid_init, hid_get_data, hid_set_data - USB HID access routines


     #include <usbhid.h>

     hid_get_report_desc(int file);

     hid_use_report_desc(unsigned char *data, unsigned int size);

     hid_dispose_report_desc(report_desc_t d);

     hid_start_parse(report_desc_t d, int kindset, int id);

     hid_end_parse(hid_data_t s);

     hid_get_item(hid_data_t s, hid_item_t *h);

     hid_report_size(report_desc_t d, hid_kind_t k, int id);

     hid_locate(report_desc_t d, u_int usage, hid_kind_t k, hid_item_t *h,
             int id);

     char *
     hid_usage_page(int i);

     char *
     hid_usage_in_page(u_int u);

     hid_parse_usage_page(const char *);

     char *
     hid_parse_usage_in_page(const char *);

     hid_init(char *file);

     hid_start(char *file);

     hid_get_data(void *data, hid_item_t *h);

     hid_set_data(void *data, hid_item_t *h, u_int data);


     The usbhid library provides routines to extract data from USB Human In-
     terface Devices.


     USB HID devices send and receive data laid out in a device dependent way.
     The usbhid library contains routines to extract the report descriptor
     which contains the data layout information and then use this information.

     The routines can be divided into four parts: extraction of the descrip-
     tor, parsing of the descriptor, translating to/from symbolic names, and
     data manipulation.


     A report descriptor can be obtained by calling hid_get_report_desc() with
     a file descriptor obtained by opening a uhid(4) device. Alternatively a
     data buffer containing the report descriptor can be passed into
     hid_use_report_desc(). The data is copied into an internal structure.
     When the report descriptor is no longer needed it should be freed by cal-
     ling hid_dispose_report_desc(). The type report_desc_t is opaque and
     should be used when calling the parsing functions. If
     hid_dispose_report_desc() fails it will return NULL.


     To parse the report descriptor the hid_start_parse() function should be
     called with a report descriptor and a set that describes which items that
     are interesting. The set is obtained by or-ing together values (1 << k)
     where k is an item of type hid_kind_t. The report ID (if present) is
     given by id. The function returns NULL if the initialization fails, oth-
     erwise an opaque value to be used in subsequent calls. After parsing the
     hid_end_parse() function should be called to free internal data struc-

     To iterate through all the items in the report descriptor, hid_get_item()
     should be called while it returns a value greater than 0. When the report
     descriptor ends it will return 0; a syntax error within the report
     descriptor will cause a return value less than 0. The struct pointed to
     by h will be filled with the relevant data for the item. The definition
     of hid_item_t can be found in <usbhid.h> and the meaning of the com-
     ponents in the USB HID documentation.

     Data should be read/written to the device in the size of the report. The
     size of a report (of a certain kind) can be computed by the
     hid_report_size() function. If the report is prefixed by an ID byte it is
     given by id.

     To locate a single item the hid_locate() function can be used. It should
     be given the usage code of the item and its kind and it will fill the
     item and return non-zero if the item was found.


     The function hid_usage_page() will return the symbolic name of a usage
     page, and the function hid_usage_in_page() will return the symbolic name
     of the usage within the page. Both these functions may return a pointer
     to static data.

     The functions hid_parse_usage_page() and hid_parse_usage_in_page() are
     the inverses of hid_usage_page() and hid_usage_in_page(). They take a
     usage string and return the number of the usage, or -1 if it cannot be

     Before any of these functions can be called the usage table must be
     parsed, this is done by calling hid_start() with the name of the table.
     Passing NULL to this function will cause it to use the default table. A
     return value of -1 indicates that an error has occurred, and errno is


     Given the data obtained from a HID device and an item in the report
     descriptor the hid_get_data() function extracts the value of the item.
     Conversely hid_set_data() can be used to put data into a report (which
     must be zeroed first).


     /usr/share/misc/usb_hid_usages The default HID usage table.


     The USB specifications can be found at:

     uhid(4), usb(4)


     The usbhid library first appeared in OpenBSD 3.0.


     This man page is woefully incomplete.

MirOS BSD #10-current         December 29, 2001                              2

Generated on 2015-10-06 19:36:22 by $MirOS: src/scripts/roff2htm,v 1.80 2015/01/02 13:54:19 tg Exp $

These manual pages and other documentation are copyrighted by their respective writers; their source is available at our CVSweb, AnonCVS, and other mirrors. The rest is Copyright © 2002–2015 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.