MirOS Manual: tftp(1)

TFTP(1)                      BSD Reference Manual                      TFTP(1)

NAME

     tftp - trivial file transfer program

SYNOPSIS

     tftp [host [port]]

DESCRIPTION

     tftp is the user interface to the Internet TFTP (Trivial File Transfer
     Protocol), which allows users to transfer files to and from a remote
     machine. The remote host and port may be specified on the command line,
     in which case tftp uses them as the default for future transfers (see the
     connect command below).

COMMANDS

     Once tftp is running, it issues the prompt 'tftp>' and recognizes the
     following commands:

     ? command-name [...]
              Print help information.

     ascii    Shorthand for mode ascii.

     binary   Shorthand for mode binary.

     connect host [port]
              Set the host (and optionally port) for transfers. Note that the
              TFTP protocol, unlike the FTP protocol, does not maintain con-
              nections between transfers; thus, the connect command does not
              actually create a connection, but merely remembers what host is
              to be used for transfers. You do not have to use the connect
              command; the remote host can be specified as part of the get or
              put commands.

     get [host:]file [localname]
     get [host1:]file1 [host2:]file2 ... [hostN:]fileN
              Get a file or set of files from the remote host. When using the
              host argument, the host will be used as the default host for fu-
              ture transfers. If localname is specified, the file is stored
              locally as localname, otherwise the original filename is used.

              Note that it is not possible to download two files at the same
              time; only one, three, or more than three files can be download-
              ed at the same time.

     mode transfer-mode
              Set the mode for transfers; transfer-mode may be one of ascii or
              binary. The default is ascii.

     put file [[host:]remotename]
     put file1 file2 ... fileN [[host:]remote-directory]
              Put a file or set of files to the remote host. When using the
              host argument, the host will be used as the default host for fu-
              ture transfers. If remotename is specified, the file is stored
              remotely as remotename, otherwise the original filename is used.
              If the remote-directory argument is used, the remote host is as-
              sumed to be a UNIX machine.

              Note that files may only be written to if they already exist on
              the remote host and are publicly writable. See tftpd(8) for
              further details.

     quit     Exit tftp. An end-of-file also exits.

     rexmt retransmission-timeout
              Set the per-packet retransmission timeout, in seconds.

     status   Show current status.

     timeout total-transmission-timeout
              Set the total transmission timeout, in seconds.

     trace    Toggle packet tracing.

     verbose  Toggle verbose mode.

SEE ALSO

     ftp(1), tftpd(8)

HISTORY

     The tftp command appeared in 4.3BSD.

BUGS

     Because there is no user login or validation within the TFTP protocol,
     the remote site will probably have some sort of file access restrictions
     in place. The exact methods are specific to each site and therefore dif-
     ficult to document here.

     This implementation of tftp does not support blocksize negotiation (RFC
     1783), so files larger than 33488896 octets (65535 blocks) cannot be
     transferred.

MirOS BSD #10-current           April 18, 1994                               1

Generated on 2014-07-04 21:17:45 by $MirOS: src/scripts/roff2htm,v 1.79 2014/02/10 00:36:11 tg Exp $

These manual pages and other documentation are copyrighted by their respective writers; their source is available at our CVSweb, AnonCVS, and other mirrors. The rest is Copyright © 2002‒2014 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.