SECTOK(1) BSD Reference Manual SECTOK(1)
sectok - communicate with smartcards using iso7816
sectok [-0123] [-f scriptfile] [-s sleeptime]
sectok is a command-line-like interface for communicating with
smartcards. APDUs can be sent to the card, and results are displayed.
Some commands are card-specific, and focus on the Schlumberger Cyberflex
Access Javacards.
The options are as follows:
-0123 Select port.
-f scriptfile
Run commands from scriptfile.
-s sleeptime
Set sleep (in milliseconds) between commands in the script.
help List all commands.
help [command]
Show help for command.
? [command]
Show help for command.
reset [-0123ivf]
Reset smartcard.
-0123 select port
-i don't wait for card insertion
-v verbose
-f open connection even if atr is bad
open [-0123ivf]
Synonym for reset.
close Close smartcard connection.
quit Quit sectok.
apdu [-c class] ins p1 p2 p3 data ...
Send APDU to smartcard.
fid [-v] fid/aid
Select file or aid identified by fid/aid. fid/aid can be a numer-
ic fid such as 3f00, a two character name, or an aid in hex or
ASCII.
isearch
Try all 256 possible instructions and print results.
class [class]
Inquire or set default application class.
read [-x] filesize
Read selected fid and write to stdout.
write input-filename
Read from input-filename and write to selected fid.
challenge [length]
Get a random challenge from the card.
pin [-k keyno] [PIN]
Verify CHV (PIN).
chpin [-k keyno]
Change CHV (PIN).
ls [-l]
List all files in current DF.
acl fid [principal: r1 r2 ...]
principals
world, CHV1, CHV2, AUT0, AUT1, AUT2, AUT3, AUT4
f_rights
r, w, x/a, inval, rehab, dec, inc
d_rights
l, d, a, i, manage
create fid size
delete fid
jdefault [-d]
Set default applet.
-d set default applet to default loader
jatr Set java atr.
jdata Print useful info about the card
login [-d] [-k keyno] [-v] [-x hex-aut0]
"login" (verify AUT0 key)
-d use manufacturer's default AUT0 key
jload [-p progID] [-c contID] [-s cont_size] [-i inst_size] [-v] [-a aid]
filename
Load an applet to the card. If the first byte of the aid is '#'
it will be converted to 0xfc.
junload [-p progID] [-c contID]
jselect [-a aid] [-d]
Select applet.
-d select default loader
setpass [-d] [-x hex-aut0]
-d use manufacturer's default AUT0 key
sectok first appeared in OpenBSD 3.0.
sectok was written by Jim Rees and others at University of Michigan
Center for Information Technology Integration (CITI).
MirOS BSD #10-current July 17, 2001 2
Generated on 2013-04-27 00:20:00 by $MirOS: src/scripts/roff2htm,v 1.77 2013/01/01 20:49:09 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002‒2013 The MirOS Project, Germany.
This product includes material
provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.