PCITWEAK(1) UNIX Programmer's Manual PCITWEAK(1)
pcitweak - read/write PCI config space
pcitweak -l pcitweak -r PCI-ID [-b|-h] offset pcitweak -w PCI-ID [-b|-h] offset value
Pcitweak is a utility that can be used to examine or change registers in the PCI configuration space. On most platforms pcitweak can only be run by the root user.
-l Probe the PCI buses and print a line for each detected device. Each line contains the bus loca- tion (bus:device:function), chip vendor/device, card (subsystem) vendor/card, revision, class and header type. All values printed are in hexadecimal. -r PCI-ID Read the PCI configuration space register at offset for the PCI device at bus location PCI-ID. PCI-ID should be given in the form bus:device:function, with each value in hexadecimal. By default, a 32- bit register is read. -w PCI-ID Write value to the PCI configuration space register at offset for the PCI device at bus location PCI-ID. PCI-ID should be given in the form bus:device:function, with each value in hexadecimal. By default, a 32-bit register is written. -b Read or write an 8-bit value (byte). -h Read or write a 16-bit value (halfword).
David Dawes (firstname.lastname@example.org). XFree86 Version 4.5.0 1
Generated on 2015-07-19 22:36:15 by $MirOS: src/scripts/roff2htm,v 1.80 2015/01/02 13:54:19 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002–2015 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.