MT(1) BSD Reference Manual MT(1)
mt, eject - magnetic tape and removable media manipulating program
mt [-f device] command [count] eject [-t] device
The mt utility sends commands to a magnetic tape drive. By default, mt performs the requested operation once. Operations may be performed multi- ple times by specifying count. Note that device must reference a raw (not block) tape device. If device is of the form "host:device" or "user@host:device", mt writes to the named tape device on the remote host using rmt(8). eject is simply an alias for mt, with the offline command specified. eject may also be used to eject other types of removable media. The options for mt are as follows: -f device Operate on the device specified. The options for eject are as follows: -t Insert the device instead of ejecting. For the cd(4) driver, this requests that the tray be closed. The available commands are listed below. Only as many characters as are required to uniquely identify a command need be specified. eof, weof Write count end-of-file marks at the current position on the tape. fsf Forward space count files. fsr Forward space count records. bsf Back space count files. bsr Back space count records. rewind Rewind the tape (count is ignored). offline, rewoffl Rewind the tape and place the tape unit off-line (count is ignored). On non-tape removable media, the offline command causes the media to be ejected when the last operation on it closes (i.e., the filesystem is unmounted). status Print status information about the tape unit. retension Retension the tape (if this operation is supported by the tape unit). erase Erase the tape (if this operation is supported by the tape unit). eom Forward space to the end of the media. blocksize Set the tape blocksize to count bytes. density Set the tape density code to count as specified in the SCSI2 specification. If a tape name is not specified, and the environment variable TAPE does not exist, mt uses the device /dev/rst0. The TAPE variable is ignored by eject. mt returns a 0 exit status when the operation(s) were successful, 1 if the command was unrecognized, and 2 if an operation failed.
If the following environment variable exists, it is utilized by mt. TAPE mt checks the TAPE environment variable if the argument device is not given.
/dev/rst* raw SCSI tape interface /dev/rmt* raw magnetic tape interface /usr/src/sys/scsi/scsi_tape.h list of SCSI2 density codes
$ eject /dev/rcd0c Eject the first CD device. This will work even if there is no CD in the drive.
dd(1), ioctl(2), mtio(4), environ(7)
The mt utility appeared in Version 2 AT&T UNIX. MirOS BSD #10-current June 12, 1996 1
Generated on 2013-04-27 00:20:00 by $MirOS: src/scripts/roff2htm,v 1.77 2013/01/01 20:49:09 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002‒2013 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.