DIFF(1) BSD Reference Manual DIFF(1)
diff - differential file and directory comparator
diff [-abdilpqtTw] [-I pattern] [-c | -e | -f | -n | -u] [-L label] file1 file2 diff [-abdilpqtTw] [-I pattern] [-L label] -C number file1 file2 diff [-abdilqtw] [-I pattern] -D string file1 file2 diff [-abdilpqtTw] [-I pattern] [-L label] -U number file1 file2 diff [-abdilNPpqtTw] [-I pattern] [-c | -e | -f | -n | -u] [-L label] [-r] [-s] [-S name] [-X file] [-x pattern] dir1 dir2
The diff utility compares the contents of file1 and file2 and writes to the standard output the list of changes necessary to convert one file into the other. No output is produced if the files are identical. Output options (mutually exclusive): -c Produces a diff with 3 lines of context. With -c the output for- mat is modified slightly: the output begins with identification of the files involved and their creation dates and then each change is separated by a line with fifteen *'s. The lines removed from file1 are marked with '- '; those added to file2 are marked '+ '. Lines which are changed from one file to the other are marked in both files with '! '. Changes which lie within 3 lines of each other are grouped together on output. -e Produces output in a form suitable as input for the editor utili- ty, ed(1), which can then be used to convert file1 into file2. Extra commands are added to the output when comparing directories with -e, so that the result is a sh(1) script for converting text files which are common to the two directories from their state in dir1 to their state in dir2. -f Identical output to that of the -e flag, but in reverse order. It cannot be digested by ed(1). -n Produces a script similar to that of -e, but in the opposite ord- er and with a count of changed lines on each insert or delete command. This is the form used by rcsdiff(1). -q Just print a line when the files differ. Does not output a list of changes. -u Produces a unified diff with 3 lines of context. A unified diff is similar to the context diff produced by the -c option. Howev- er, unlike with -c, all lines to be changed (added and/or re- moved) are present in a single section. -C number Like -c but produces a diff with number lines of context. -D string Creates a merged version of file1 and file2 on the standard out- put, with C preprocessor controls included so that a compilation of the result without defining string is equivalent to compiling file1, while defining string will yield file2. -U number Like -u but produces a diff with number lines of context. Comparison options: -a Treat all files as ASCII text. Normally diff will simply print "Binary files ... differ" if files contain binary characters. Use of this option forces diff to produce a diff. -b Causes trailing blanks (spaces and tabs) to be ignored, and other strings of blanks to compare equal. -d Try very hard to produce a diff as small as possible. This may consume a lot of processing power and memory when processing large files with many changes. This option also changes the modus operandi of diff to behave more like GNU diff wrt a set of rela- tively near changes. -I pattern Ignores changes, insertions, and deletions whose lines match the extended regular expression pattern. Multiple -I patterns may be specified. All lines in the change must match some pattern for the change to be ignored. See re_format(7) for more information on regular expression patterns. -i Ignores the case of letters. E.g., "A" will compare equal to "a". -l Long output format; each text file diff'd is piped through pr(1) to paginate it; other differences are remembered and summarized after all text file differences are reported. -L label Print label instead of the first (and second, if this option is specified twice) file name and time in the context or unified diff header. -p With unified and context diffs, show with each change the first 40 characters of the last line before the context beginning with a letter, an underscore or a dollar sign. For C source code fol- lowing standard layout conventions, this will show the prototype of the function the change applies to. -t Will expand tabs in output lines. Normal or -c output adds character(s) to the front of each line which may screw up the in- dentation of the original source lines and make the output list- ing difficult to interpret. This option will preserve the origi- nal source's indentation. -T Print a tab rather than a space before the rest of the line for the normal, context or unified output formats. This makes the alignment of tabs in the line consistent. -w Is similar to -b but causes whitespace (blanks and tabs) to be totally ignored. E.g., "if ( a == b )" will compare equal to "if(a==b)". Directory comparison options: -N If a file is found in only one directory, act as if it was found in the other directory too but was of zero size. -P If a file is found only in dir2, act as if it was found in dir1 too but was of zero size. -r Causes application of diff recursively to common subdirectories encountered. -s Causes diff to report files which are the same, which are other- wise not mentioned. -S name Re-starts a directory diff in the middle, beginning with file name. -X file Exclude files and subdirectories from comparison whose basenames match lines in file. Multiple -X options may be specified. -x pattern Exclude files and subdirectories from comparison whose basenames match pattern. Patterns are matched using shell-style globbing via fnmatch(3). Multiple -x options may be specified. If both arguments are directories, diff sorts the contents of the direc- tories by name, and then runs the regular file diff algorithm, producing a change list, on text files which are different. Binary files which differ, common subdirectories, and files which appear in only one direc- tory are described as such. In directory mode only regular files and directories are compared. If a non-regular file such as a device special file or FIFO is encountered, a diagnostic message is printed. If only one of file1 and file2 is a directory, diff is applied to the non-directory file and the file contained in the directory file with a filename that is the same as the last component of the non-directory file. If either file1 or file2 is '-', the standard input is used in its place.
The default (without -e, -c, or -n options) output contains lines of these forms, where XX, YY, ZZ, QQ are line numbers respective of file order. XXaYY At (the end of) line XX of file1, append the contents of line YY of file2 to make them equal. XXaYY,ZZ Same as above, but append the range of lines, YY through ZZ of file2 to line XX of file1. XXdYY At line XX delete the line. The value YY tells to which line the change would bring file1 in line with file1. XX,YYdZZ Delete the range of lines XX through YY in file1. XXcYY Change the line XX in file1 to the line YY in file2. XX,YYcZZ Replace the range of specified lines with the line ZZ. XX,YYcZZ,QQ Replace the range XX,YY from file1 with the range ZZ,QQ from file2. These lines resemble ed(1) subcommands to convert file1 into file2. The line numbers before the action letters pertain to file1; those after per- tain to file2. Thus, by exchanging a for d and reading the line in re- verse order, one can also determine how to convert file2 into file1. As in ed(1), identical pairs (where num1 = num2) are abbreviated as a single number.
TMPDIR If the environment variable TMPDIR exists, diff will use the directory specified by TMPDIR as the temporary directory.
/tmp/diff.XXXXXXXX Temporary file used when comparing a device or the standard input. Note that the temporary file is un- linked as soon as it is created so it will not show up in a directory listing.
The diff utility exits with one of the following values: 0 No differences were found. 1 Differences were found. >1 An error occurred.
cmp(1), comm(1), diff3(1), ed(1), pr(1), fnmatch(3), re_format(7)
The diff utility is expected to be a superset of the IEEE Std 1003.1-2001 ("POSIX") specification.
A diff command appeared in Version 6 AT&T UNIX.
When comparing directories with the -b, -w or -i options specified, diff first compares the files ala cmp(1), and then decides to run the diff al- gorithm if they are not equal. This may cause a small amount of spurious output if the files then turn out to be identical because the only differences are insignificant whitespace or case differences. MirOS BSD #10-current July 21, 2003 3
Generated on 2014-07-04 21:17:45 by $MirOS: src/scripts/roff2htm,v 1.79 2014/02/10 00:36:11 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002‒2014 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.