CDIO(1) BSD Reference Manual CDIO(1)
cdio - compact disc control utility
cdio [-sv] [-d host:port] [-f device] [command args ...]
The cdio program is a compact disc control utility, with support for playing audio CDs and TAO CD writing. If no command is given, cdio enters interactive mode, reading commands from the standard input. The options are as follows: -d host:port Specifies a CDDB host [default: freedb.freedb.org:cddb]. -f device Specifies the name of the CD device, such as /dev/rcd0c or mcd0. Both absolute and relative paths to /dev filenames are possible; the raw partition name is added if needed. -s Silent mode. Do not print table headers or human-readable com- ments. -v Verbose mode. A second occurence of -v causes even more informa- tion to be printed. The available commands are listed below. Only as many characters as are required to uniquely identify a command need be specified. If no command is given, only a track number or range, then play is assumed. blank Minimally blank the disc. cddbinfo [n] Print the Table Of Contents (TOC) after matching the disc with the CDDB. In case of multiple matches, reissue the command with n. cdid Print the disc ID that will be used for matching with the CDDB. cdplay [track1-trackN ...] Play specified tracks from disk. Unlike play, the CD player need not be connected to an audio device; instead it rips tracks from disk and outputs audio data to the default audio(4) device or aucat(1) socket. Both individual tracks and track ranges may be specified. If range is specified in descending order tracks will be played in descending order. If the first value in the range is omitted, tracks from first track on disk to the specified one will be played. If the last value in the range is omitted, tracks from the specified track to the last track on disk will be played. cdrip [track1-trackN ...] Rip specified tracks from disk. Audio tracks are saved as WAVE sound files. All tracks will be saved in the current working directory. If parameters are omitted, all tracks are ripped. Both individual tracks and track ranges may be specified, in the same format as the cdplay command. close Inject the disc. debug on | off Enable/disable the debugging mode of the CD device driver. device devname Make devname the current CD device. This is the equivalent of quitting cdio and restarting with a different device. eject Eject the disc. exit A synonym for quit. help Print the list of available commands. info Print the Table Of Contents (TOC). If -v is also specified, the current features and current profile is printed. If -v is speci- fied twice, the complete list of supported profiles and a hex dump of each current feature is printed. lock Lock the drive door, preventing it from being opened manually. The lock is only in effect during run time of cdio, and can be rescinded with, for example, the eject command. next Play the next track. If we're at the last track, stop. pause Stop playing. Do not stop the disc. play [track1[.index1] [track2[.index2]]] Play from track1 to track2; an optional index point can be speci- fied for each track. If only one track is specified, play from that track to the end of the disc. If no tracks are specified, play the whole disc. play [[tr1] m1:s1[.f1] [tr2] [m2:s2[.f2]]] Play from the absolute address (MSF) defined by m1 in minutes, s1 in seconds, frame number f1, to the absolute address defined by m2 in minutes, s2 in seconds, frame number f2. If a track number is specified (trX), then the minutes, seconds, and frame numbers are relative to the start of that track. Minutes are in the range 099. Seconds are in the range 059. Frame numbers are in the range 074. play [#block [len]] Play starting from the logical block using len logical blocks. previous Play the previous track. If we're at the first track, restart. quit Quit the program. replay Replay the current track. reset Perform a hardware reset of the device. resume Resume playing. Used after the pause command. set lba | msf Set LBA (lba) or minute-second-frame (msf) ioctl mode. The de- fault is minute-second-frame ioctl mode. status Print information about the disc: the current playing status and position, the current media catalog status, and the current values of the volume for left and right channels. stop Stop the disc. tao [-ad] [-s speed] trackfile ... [command line only] Write a track-at-once CD containing the specified trackfile. The options are as follows: -a Write files as audio tracks. File formats of audio tracks may be CDDA or WAVE with 2 channels of PCM audio, signed 16-bit (little endian) values sampled at 44100 Hz. -d Write files as data tracks (the default). -s speed Specify a write speed for tracks. speed may be a numeri- cal value between 1 and the maximum speed supported by the media and drive, or one of the literal strings "auto" or "max", meaning the optimal or maximum speed detected. volume left_channel right_channel Set the volume of the left channel to left_channel and the volume of the right channel to right_channel. Allowed values are in the range 0-255. volume left | right | mono | stereo | mute Respectively: play the left subtrack on both left and right chan- nels; play the right subtrack on both left and right channels; set mono mode; set stereo mode; turn the sound off.
DISC, CDROM Specifies the name of the CD device to use. If both DISC and CDROM are set, DISC takes precedence. If neither DISC nor CDROM are set, the default is cd0. See also the -f option, above. AUDIODEVICE Name of the aucat(1) socket to connect to, or path to the audio(4) device to use.
aucat(1), audioctl(1), mixerctl(1), audio(4)
The cdio command is based on cdcontrol, which first appeared in FreeBSD 2.1.
Jean-Marc Zucconi, Andrey A. Chernov, Serge V. Vakulenko, Marc Espie MirOS BSD #10-current March 6, 2010 2
Generated on 2015-04-13 10:26:13 by $MirOS: src/scripts/roff2htm,v 1.80 2015/01/02 13:54:19 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002–2015 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.