MirOS Manual: 09.sendmail(SMM)

                    SENDMAIL -- An Internetwork Mail Router

                                  Eric Allman*
                       University of California, Berkeley
                                Mammoth Project


              Routing  mail  through   a   heterogenous   internet
              presents  many  new  problems.   Among  the worst of
              these is that of address mapping. Historically, this
              has  been handled on an ad hoc basis.  However, this
              approach has become unmanageable as internets grow.

              Sendmail acts a unified "post office" to  which  all
              mail  can  be  submitted.  Address interpretation is
              controlled by a production system, which  can  parse
              both  domain-based  addressing  and old-style ad hoc
              addresses. The production system is powerful  enough
              to  rewrite  addresses in the message header to con-
              form to the standards of a number of  common  target
              networks,  including  old  (NCP/RFC733) Arpanet, new
              (TCP/RFC822) Arpanet, UUCP, and  Phonenet.  Sendmail
              also  implements  an  SMTP server, message queueing,
              and aliasing.

               Sendmail implements a general internetwork mail routing

          facility, featuring aliasing and forwarding, automatic rout-

          ing to network gateways, and flexible configuration.

               In a simple network, each  node  has  an  address,  and

          resources  can  be  identified with a host-resource pair; in
             *A considerable part of this work was  done  while  under
          the  employ of the INGRES Project at the University of Cali-
          fornia at Berkeley and at Britton Lee.

          SENDMAIL -- An Internetwork Mail Router              SMM:9-1

          SMM:9-2              SENDMAIL -- An Internetwork Mail Router

          particular, the mail system  can  refer  to  users  using  a

          host-username pair. Host names and numbers have to be admin-

          istered  by  a  central  authority,  but  usernames  can  be

          assigned locally to each host.

               In an internet, multiple networks with different  char-

          acterstics  and managements must communicate. In particular,

          the syntax and semantics of resource identification  change.

          Certain  special  cases  can  be handled trivially by ad hoc

          techniques, such as  providing  network  names  that  appear

          local  to  hosts  on other networks, as with the Ethernet at

          Xerox PARC. However,  the general case is extremely complex.

          For  example,  some networks require point-to-point routing,

          which simplifies the  database  update  problem  since  only

          adjacent hosts must be entered into the system tables, while

          others use end-to-end addressing. Some networks use a  left-

          associative  syntax  and others use a right-associative syn-

          tax, causing ambiguity in mixed addresses.

               Internet standards seek to  eliminate  these  problems.

          Initially,  these  proposed  expanding  the address pairs to

          address triples, consisting  of  {network,  host,  resource}

          triples.  Network  numbers  must be universally agreed upon,

          and hosts can be  assigned  locally  on  each  network.  The

          user-level  presentation  was  quickly  expanded  to address

          domains, comprised of a local resource identification and  a

          hierarchical domain specification with a common static root.

          The domain technique separates the issue of physical  versus

          SENDMAIL -- An Internetwork Mail Router              SMM:9-3

          logical  addressing.  For  example,  an  address of the form

          "eric@a.cc.berkeley.arpa" describes only the logical organi-

          zation of the address space.

               Sendmail is intended to help bridge the gap between the

          totally  ad  hoc world of networks that know nothing of each

          other and the clean, tightly-coupled world of unique network

          numbers.  It  can  accept  old  arbitrary  address syntaxes,

          resolving ambiguities using heuristics specified by the sys-

          tem  administrator,  as  well as domain-based addressing. It

          helps  guide  the  conversion  of  message  formats  between

          disparate networks. In short, sendmail is designed to assist

          a graceful transition to consistent internetwork  addressing


               Section 1 discusses the design goals for sendmail. Sec-

          tion  2 gives an overview of the basic functions of the sys-

          tem. In section 3, details of usage are discussed. Section 4

          compares  sendmail  to  other  internet mail routers, and an

          evaluation of sendmail is  given  in  section  5,  including

          future plans.

          1. DESIGN GOALS

                  Design goals for sendmail include:

              (1)   Compatibility with  the  existing  mail  programs,

                    including Bell version 6 mail, Bell version 7 mail

                    [UNIX83], Berkeley Mail [Shoens79],  BerkNet  mail

          SMM:9-4              SENDMAIL -- An Internetwork Mail Router

                    [Schmidt79],  and  hopefully UUCP mail [Nowitz78a,

                    Nowitz78b]. ARPANET  mail  [Crocker77a,  Postel77]

                    was also required.

              (2)   Reliability, in the  sense  of  guaranteeing  that

                    every  message  is correctly delivered or at least

                    brought to the attention of a  human  for  correct

                    disposal;  no  message  should  ever be completely

                    lost. This goal was considered  essential  because

                    of the emphasis on mail in our environment. It has

                    turned out to be  one  of  the  hardest  goals  to

                    satisfy,  especially  in  the  face  of  the  many

                    anomalous  message  formats  produced  by  various

                    ARPANET sites. For example, certain sites generate

                    improperly formated addresses, occasionally  caus-

                    ing  error-message loops. Some hosts use blanks in

                    names, causing problems with  UNIX  mail  programs

                    that  assume  that  an  address  is  one word. The

                    semantics of some fields are interpreted  slightly

                    differently  by  different  sites. In summary, the

                    obscure features  of  the  ARPANET  mail  protocol

                    really  are used and are difficult to support, but

                    must be supported.

              (3)   Existing software to do actual delivery should  be

                    used  whenever possible. This goal derives as much

                    from political  and  practical  considerations  as


          SENDMAIL -- An Internetwork Mail Router              SMM:9-5

              (4)   Easy expansion  to  fairly  complex  environments,

                    including multiple connections to a single network

                    type (such as with multiple  UUCP  or  Ether  nets

                    [Metcalfe76]). This goal requires consideration of

                    the contents of an address as well as  its  syntax

                    in  order  to  determine which gateway to use. For

                    example, the ARPANET is bringing up the TCP proto-

                    col  to  replace  the old NCP protocol. No host at

                    Berkeley runs both TCP and NCP, so it is necessary

                    to  look  at  the  ARPANET  host name to determine

                    whether to route mail to an NCP gateway or  a  TCP


              (5)   Configuration should  not  be  compiled  into  the

                    code.  A single compiled program should be able to

                    run as is at any site (barring such basic  changes

                    as  the CPU type or the operating system). We have

                    found this seemingly unimportant goal to be criti-

                    cal in real life. Besides the simple problems that

                    occur when any program gets recompiled in  a  dif-

                    ferent  environment,  many  sites like to "fiddle"

                    with anything that they will be  recompiling  any-


              (6)   Sendmail must be able to let various groups  main-

                    tain  their own mailing lists, and let individuals

                    specify their own  forwarding,  without  modifying

                    the system alias file.

          SMM:9-6              SENDMAIL -- An Internetwork Mail Router

              (7)   Each user should be able to specify  which  mailer

                    to  execute  to  process  mail being delivered for

                    him. This feature allows users who are using  spe-

                    cialized  mailers  that  use a different format to

                    build their environment without changing the  sys-

                    tem,  and  facilitates specialized functions (such

                    as returning an "I am on vacation" message).

              (8)   Network traffic should be  minimized  by  batching

                    addresses to a single host where possible, without

                    assistance from the user.

                  These goals motivated the  architecture  illustrated

             in figure 1. The user interacts with  a  mail  generating


                    +---------+   +---------+   +---------+
                    | sender1 |   | sender2 |   | sender3 |
                    +---------+   +---------+   +---------+
                         |             |             |
                         +----------+  +  +----------+
                                    |  |  |
                                    v  v  v
                                |   sendmail  |
                                    |  |  |
                         +----------+  +  +----------+
                         |             |             |
                         v             v             v
                    +---------+   +---------+   +---------+
                    | mailer1 |   | mailer2 |   | mailer3 |
                    +---------+   +---------+   +---------+

                     Figure 1 -- Sendmail System Structure.

          SENDMAIL -- An Internetwork Mail Router              SMM:9-7

             and sending program. When the mail is created,  the  gen-

             erator  calls  sendmail,  which routes the message to the

             correct mailer(s). Since some of the senders may be  net-

             work  servers  and  some  of  the  mailers may be network

             clients, sendmail may be used as an internet  mail  gate-


          2. OVERVIEW

             2.1. System Organization

                     Sendmail neither interfaces  with  the  user  nor

                does  actual mail delivery. Rather, it collects a mes-

                sage generated by a user interface program (UIP)  such

                as  Berkeley  Mail, MS [Crocker77b], or MH [Borden79],

                edits the message as required by the destination  net-

                work,   and  calls  appropriate  mailers  to  do  mail

                delivery or queueing for network transmission[1]. This

                discipline  allows  the  insertion  of  new mailers at

                minimum cost. In this  sense  sendmail  resembles  the

                Message Processing Module (MPM) of [Postel79b].

             2.2. Interfaces to the Outside World

                     There are three  ways  sendmail  can  communicate

                with the outside world, both in receiving and in send-

                ing  mail.  These  are  using  the  conventional  UNIX
             [1]except when mailing to a file, when sendmail does  the
          delivery directly.

          SMM:9-8              SENDMAIL -- An Internetwork Mail Router

                argument vector/return status, speaking  SMTP  over  a

                pair   of  UNIX  pipes,  and  speaking  SMTP  over  an

                interprocess(or) channel.

                2.2.1. Argument vector/exit status

                        This technique is the standard UNIX method for

                   communicating  with  the  process.  A list of reci-

                   pients is sent in the argument vector, and the mes-

                   sage  body  is sent on the standard input. Anything

                   that the mailer prints is simply collected and sent

                   back  to the sender if there were any problems. The

                   exit status from the mailer is collected after  the

                   message  is  sent,  and  a diagnostic is printed if


                2.2.2. SMTP over pipes

                        The SMTP protocol [Postel82] can  be  used  to

                   run  an  interactive  lock-step  interface with the

                   mailer. A subprocess is still created, but no reci-

                   pient  addresses  are  passed to the mailer via the

                   argument list. Instead, they are passed  one  at  a

                   time  in  commands  sent  to the processes standard

                   input. Anything appearing on  the  standard  output

                   must be a reply code in a special format.

          SENDMAIL -- An Internetwork Mail Router              SMM:9-9

                2.2.3. SMTP over an IPC connection

                        This technique  is  similar  to  the  previous

                   technique, except that it uses a 4.2bsd IPC channel

                   [UNIX83]. This method is exceptionally flexible  in

                   that  the  mailer  need  not  reside  on  the  same

                   machine. It is normally used to connect to a  send-

                   mail process on another machine.

             2.3. Operational Description

                     When a sender wants to send a message, it  issues

                a  request  to sendmail using one of the three methods

                described above. Sendmail  operates  in  two  distinct

                phases. In the first phase, it collects and stores the

                message. In the second phase, message delivery occurs.

                If  there  were  errors  during  processing during the

                second phase, sendmail creates and returns a new  mes-

                sage  describing  the  error  and/or returns an status

                code telling what went wrong.

                2.3.1. Argument processing and address parsing

                        If sendmail is called using  one  of  the  two

                   subprocess  techniques,  the  arguments  are  first

                   scanned and option  specifications  are  processed.

                   Recipient addresses are then collected, either from

                   the command line or from the SMTP RCPT command, and

                   a  list  of  recipients  is  created.  Aliases  are

          SMM:9-10             SENDMAIL -- An Internetwork Mail Router

                   expanded at this step, including mailing lists.  As

                   much  validation  as  possible  of the addresses is

                   done at this step: syntax  is  checked,  and  local

                   addresses  are  verified,  but detailed checking of

                   host  names  and  addresses   is   deferred   until

                   delivery. Forwarding is also performed as the local

                   addresses are verified.

                        Sendmail appends each address to the recipient

                   list  after parsing. When a name is aliased or for-

                   warded, the old name is retained in the list, and a

                   flag is set that tells the delivery phase to ignore

                   this recipient. This list is kept free from  dupli-

                   cates,  preventing  alias  loops and duplicate mes-

                   sages deliverd to  the  same  recipient,  as  might

                   occur if a person is in two groups.

                2.3.2. Message collection

                        Sendmail then collects the message.  The  mes-

                   sage should have a header at the beginning. No for-

                   matting requirements are  imposed  on  the  message

                   except  that  they  must  be  lines  of text (i.e.,

                   binary data is not allowed). The header  is  parsed

                   and  stored  in memory, and the body of the message

                   is saved in a temporary file.

                        To simplify the program interface, the message

                   is  collected  even if no addresses were valid. The

          SENDMAIL -- An Internetwork Mail Router             SMM:9-11

                   message will be returned with an error.

                2.3.3. Message delivery

                        For each unique mailer and host in  the  reci-

                   pient  list, sendmail calls the appropriate mailer.

                   Each mailer invocation sends to all users receiving

                   the  message  on one host. Mailers that only accept

                   one recipient at a time are handled properly.

                        The message is sent to the mailer using one of

                   the  same three interfaces used to submit a message

                   to sendmail. Each copy of the message is  prepended

                   by  a  customized header. The mailer status code is

                   caught and checked, and a  suitable  error  message

                   given as appropriate. The exit code must conform to

                   a system standard or a  generic  message  ("Service

                   unavailable") is given.

                2.3.4. Queueing for retransmission

                        If the mailer returned an  status  that  indi-

                   cated  that  it  might  be  able to handle the mail

                   later, sendmail will queue the mail and  try  again


                2.3.5. Return to sender

                        If errors occur  during  processing,  sendmail

                   returns  the  message to the sender for retransmis-

          SMM:9-12             SENDMAIL -- An Internetwork Mail Router

                   sion. The letter can be mailed back or  written  in

                   the  file "dead.letter" in the sender's home direc-


             2.4. Message Header Editing

                     Certain editing  of  the  message  header  occurs

                automatically. Header lines can be inserted under con-

                trol of the configuration  file.  Some  lines  can  be

                merged; for example, a "From:" line and a "Full-name:"

                line can be merged under certain circumstances.

             2.5. Configuration File

                     Almost all configuration information is  read  at

                runtime from an ASCII file, encoding macro definitions

                (defining the value of macros used internally), header

                declarations  (telling  sendmail  the format of header

                lines that it will process specially, i.e., lines that

                it  will  add or reformat), mailer definitions (giving

                information such as the location  and  characteristics

                of  each  mailer), and address rewriting rules (a lim-

                ited production system to rewrite addresses  which  is

                used to parse and rewrite the addresses).

             [2]Obviously, if the site giving the  error  is  not  the
          originating site, the only reasonable option is to mail back
          to the sender. Also, there are many more  error  disposition
          options,  but they only effect the error message -- the "re-
          turn to sender" function is always handled in one  of  these
          two ways.

          SENDMAIL -- An Internetwork Mail Router             SMM:9-13

                     To improve performance when  reading  the  confi-

                guration  file,  a  memory image can be provided. This

                provides a "compiled" form of the configuration file.


             3.1. Arguments

                     Arguments may be flags and addresses.  Flags  set

                various  processing options. Following flag arguments,

                address arguments may be given, unless we are  running

                in  SMTP  mode.  Addresses follow the syntax in RFC822

                [Crocker82] for ARPANET address formats. In brief, the

                format is:

                 (1)   Anything in parentheses is thrown  away  (as  a


                 (2)   Anything in angle brackets ("<>") is  preferred

                       over  anything  else.  This rule implements the

                       ARPANET standard that addresses of the form

                           user name <machine-address>

                       will send to the  electronic  "machine-address"

                       rather than the human "user name."

                 (3)   Double quotes ( " ) quote phrases;  backslashes

                       quote characters. Backslashes are more powerful

                       in that they will  cause  otherwise  equivalent

                       phrases  to compare differently -- for example,

          SMM:9-14             SENDMAIL -- An Internetwork Mail Router

                       user and "user" are equivalent,  but  \user  is

                       different from either of them.

                     Parentheses, angle brackets,  and  double  quotes

                must  be  properly  balanced and nested. The rewriting

                rules control remaining parsing[3].

             3.2. Mail to Files and Programs

                     Files and programs are legitimate  message  reci-

                pients.  Files  provide  archival storage of messages,

                useful for project administration  and  history.  Pro-

                grams  are useful as recipients in a variety of situa-

                tions, for example, to maintain a public repository of

                systems  messages  (such as the Berkeley msgs program,

                or the MARS system [Sattley78]).

                     Any address passing through the  initial  parsing

                algorithm as a local address (i.e, not appearing to be

                a valid address for another mailer) is scanned for two

                special cases. If prefixed by a vertical bar ("|") the

                rest of the address is processed as a  shell  command.

                If  the  user  name begins with a slash mark ("/") the

                name is used as a file name, instead of a login name.

                     Files that have setuid or setgid bits set but  no

                execute  bits  set have those bits honored if sendmail
             [3]Disclaimer: Some  special  processing  is  done  after
          rewriting local names; see below.

          SENDMAIL -- An Internetwork Mail Router             SMM:9-15

                is running as root.

             3.3. Aliasing, Forwarding, Inclusion

                     Sendmail  reroutes  mail  three  ways.   Aliasing

                applies  system  wide.  Forwarding allows each user to

                reroute  incoming  mail  destined  for  that  account.

                Inclusion  directs  sendmail to read a file for a list

                of addresses, and is normally used in conjunction with


                3.3.1. Aliasing

                        Aliasing maps names to address lists  using  a

                   system-wide  file.  This  file  is indexed to speed

                   access. Only names that parse as local are  allowed

                   as  aliases;  this  guarantees  a unique key (since

                   there are no nicknames for the local host).

                3.3.2. Forwarding

                        After aliasing, recipients that are local  and

                   valid are checked for the existence of a ".forward"

                   file in their home directory.  If  it  exists,  the

                   message is not sent to that user, but rather to the

                   list of users in that file. Often  this  list  will

                   contain  only  one address, and the feature will be

                   used for network mail forwarding.

          SMM:9-16             SENDMAIL -- An Internetwork Mail Router

                        Forwarding also permits a user  to  specify  a

                   private  incoming  mailer.  For example, forwarding


                       "|/usr/local/newmail myname"

                   will use a different incoming mailer.

                3.3.3. Inclusion

                        Inclusion is specified in RFC 733 [Crocker77a]


                       :Include: pathname

                   An address of this form reads the file specified by

                   pathname  and  sends  to  all  users listed in that


                        The intent is not to  support  direct  use  of

                   this feature, but rather to use this as a subset of

                   aliasing. For example, an alias of the form:

                       project: :include:/usr/project/userlist

                   is a method of letting a project maintain a mailing

                   list  without  interaction with the system adminis-

                   tration, even if the alias file is protected.

                        It is not necessary to rebuild  the  index  on

                   the   alias  database  when  a  :include:  list  is


          SENDMAIL -- An Internetwork Mail Router             SMM:9-17

             3.4. Message Collection

                     Once all recipient addresses are parsed and veri-

                fied,  the  message is collected. The message comes in

                two parts:  a  message  header  and  a  message  body,

                separated by a blank line.

                     The header is formatted as a series of  lines  of

                the form

                            field-name: field-value

                Field-value can be split across lines by starting  the

                following  lines  with  a  space or a tab. Some header

                fields  have  special  internal  meaning,   and   have

                appropriate special processing. Other headers are sim-

                ply passed through. Some header fields  may  be  added

                automatically, such as time stamps.

                     The body is a series of text lines.  It  is  com-

                pletely uninterpreted and untouched, except that lines

                beginning  with  a  dot  have  the  dot  doubled  when

                transmitted  over  an  SMTP channel. This extra dot is

                stripped by the receiver.

             3.5. Message Delivery

                     The send  queue  is  ordered  by  receiving  host

                before  transmission  to  implement  message batching.

                Each address is marked as it is sent so rescanning the

          SMM:9-18             SENDMAIL -- An Internetwork Mail Router

                list  is  safe.  An argument list is built as the scan

                proceeds. Mail to files is detected during the scan of

                the  send  list.  The  interface to the mailer is per-

                formed using one of the techniques described  in  sec-

                tion 2.2.

                     After a connection is established, sendmail makes

                the  per-mailer  changes  to  the header and sends the

                result to the mailer. If any mail is rejected  by  the

                mailer,  a  flag is set to invoke the return-to-sender

                function after all delivery completes.

             3.6. Queued Messages

                     If the mailer returns a "temporary failure"  exit

                status,  the message is queued. A control file is used

                to describe the recipients to be sent to  and  various

                other  parameters. This control file is formatted as a

                series of lines, each describing  a  sender,  a  reci-

                pient,  the  time of submission, or some other salient

                parameter of the message. The header of the message is

                stored  in  the  control  file, so that the associated

                data file in the queue is just the temporary file that

                was originally collected.

             3.7. Configuration

                     Configuration is controlled primarily by a confi-

                guration  file  read  at  startup. Sendmail should not

          SENDMAIL -- An Internetwork Mail Router             SMM:9-19

                need to be recomplied except

                 (1)   To change operating systems (V6, V7/32V, 4BSD).

                 (2)   To remove or insert  the  DBM  (UNIX  database)


                 (3)   To change ARPANET reply codes.

                 (4)   To add headers fields  requiring  special  pro-


                Adding mailers or changing parsing  (i.e.,  rewriting)

                or routing information does not require recompilation.

                     If the mail is being sent by a  local  user,  and

                the  file ".mailcf" exists in the sender's home direc-

                tory, that file is read as a configuration file  after

                the system configuration file. The primary use of this

                feature is to add header lines.

                     The configuration file encodes macro definitions,

                header   definitions,  mailer  definitions,  rewriting

                rules, and options.

                3.7.1. Macros

                        Macros can be used in three ways. Certain mac-

                   ros  transmit unstructured textual information into

                   the mail system, such as the name sendmail will use

                   to  identify itself in error messages. Other macros

          SMM:9-20             SENDMAIL -- An Internetwork Mail Router

                   transmit information from sendmail  to  the  confi-

                   guration  file  for  use  in  creating other fields

                   (such as argument vectors to  mailers);  e.g.,  the

                   name  of  the  sender, and the host and user of the

                   recipient. Other macros are unused internally,  and

                   can be used as shorthand in the configuration file.

                3.7.2. Header declarations

                        Header declarations  inform  sendmail  of  the

                   format  of  known  header lines. Knowledge of a few

                   header lines is built into sendmail,  such  as  the

                   "From:" and "Date:" lines.

                        Most configured headers will be  automatically

                   inserted  in  the  outgoing  message  if they don't

                   exist in the incoming message. Certain headers  are

                   suppressed by some mailers.

                3.7.3. Mailer declarations

                        Mailer declarations tell sendmail of the vari-

                   ous  mailers available to it. The definition speci-

                   fies the internal name of the mailer, the  pathname

                   of  the program to call, some flags associated with

                   the mailer, and an argument vector to  be  used  on

                   the call; this vector is macro-expanded before use.

          SENDMAIL -- An Internetwork Mail Router             SMM:9-21

                3.7.4. Address rewriting rules

                        The heart of address parsing in sendmail is  a

                   set  of  rewriting rules. These are an ordered list

                   of pattern-replacement rules, (somewhat like a pro-

                   duction  system,  except  that  order is critical),

                   which are applied to each address. The  address  is

                   rewritten  textually  until  it is either rewritten

                   into a special canonical  form  (i.e.,  a  (mailer,

                   host,  user)  3-tuple,  such as {arpanet, usc-isif,

                   postel}  representing  the   address   "postel@usc-

                   isif"),  or  it  falls  off the end. When a pattern

                   matches, the rule is reapplied until it fails.

                        The configuration file also supports the edit-

                   ing  of addresses into different formats. For exam-

                   ple, an address of the form:


                   might be mapped into:


                   to conform to the domain syntax.  Translations  can

                   also be done in the other direction.

                3.7.5. Option setting

                        There are several options that can be set from

                   the configuration file. These include the pathnames

          SMM:9-22             SENDMAIL -- An Internetwork Mail Router

                   of various support files, timeouts, default  modes,



             4.1. Delivermail

                     Sendmail is an outgrowth of delivermail. The pri-

                mary differences are:

                 (1)   Configuration information is not  compiled  in.

                       This  change simplifies many of the problems of

                       moving to other machines. It also  allows  easy

                       debugging of new mailers.

                 (2)   Address parsing is more flexible. For  example,

                       delivermail  only  supported one gateway to any

                       network, whereas sendmail can be  sensitive  to

                       host names and reroute to different gateways.

                 (3)   Forwarding and :include: features eliminate the

                       requirement that the system alias file be writ-

                       able by any user (or that an update program  be

                       written, or that the system administration make

                       all changes).

                 (4)   Sendmail supports message batching across  net-

                       works  when a message is being sent to multiple


          SENDMAIL -- An Internetwork Mail Router             SMM:9-23

                 (5)   A mail queue is provided in sendmail. Mail that

                       cannot  be delivered immediately but can poten-

                       tially be delivered later  is  stored  in  this

                       queue  for  a  later retry. The queue also pro-

                       vides a buffer against  system  crashes;  after

                       the  message has been collected it may be reli-

                       ably redelivered even  if  the  system  crashes

                       during the initial delivery.

                 (6)   Sendmail uses the networking  support  provided

                       by  4.2BSD  to  provide a direct interface net-

                       works such as the ARPANET and/or Ethernet using

                       SMTP (the Simple Mail Transfer Protocol) over a

                       TCP/IP connection.

             4.2. MMDF

                     MMDF [Crocker79] spans a wider problem  set  than

                sendmail.  For  example, the domain of MMDF includes a

                "phone network"  mailer,  whereas  sendmail  calls  on

                preexisting mailers in most cases.

                     MMDF and sendmail both support aliasing,  custom-

                ized  mailers,  message batching, automatic forwarding

                to gateways, queueing, and retransmission.  MMDF  sup-

                ports  two-stage timeout, which sendmail does not sup-


          SMM:9-24             SENDMAIL -- An Internetwork Mail Router

                     The configuration for MMDF is compiled  into  the


                     Since MMDF does not consider  backwards  compati-

                bility  as  a  design  goal,  the  address  parsing is

                simpler but much less flexible.

                     It is somewhat harder to integrate  a  new  chan-

                nel[5] into MMDF. In particular, MMDF  must  know  the

                location  and  format of host tables for all channels,

                and the channel must speak a  special  protocol.  This

                allows  MMDF  to  do  additional verification (such as

                verifying host names) at submission time.

                     MMDF  strictly  separates  the   submission   and

                delivery  phases. Although sendmail has the concept of

                each of these stages, they  are  integrated  into  one

                program,  whereas in MMDF they are split into two pro-


             4.3. Message Processing Module

                     The Message Processing Module (MPM) discussed  by

                Postel  [Postel79b]  matches sendmail closely in terms

                of its basic architecture. However, like MMDF, the MPM

                includes the network interface software as part of its
             [4]Dynamic configuration tables are currently being  con-
          sidered  for  MMDF;  allowing the installer to select either
          compiled or dynamic tables.
             [5]The MMDF equivalent of a sendmail "mailer."

          SENDMAIL -- An Internetwork Mail Router             SMM:9-25


                     MPM also  postulates  a  duplex  channel  to  the

                receiver, as does MMDF, thus allowing simpler handling

                of errors by the mailer than is possible in  sendmail.

                When  a message queued by sendmail is sent, any errors

                must be returned to the sender by the  mailer  itself.

                Both  MPM  and  MMDF  mailers  can return an immediate

                error response,  and  a  single  error  processor  can

                create an appropriate response.

                     MPM prefers passing the message as  a  structured

                object, with type-length-value tuples[6]. Such a  con-

                vention  requires  a much higher degree of cooperation

                between mailers than is required by sendmail. MPM also

                assumes  a universally agreed upon internet name space

                (with each address in  the  form  of  a  net-host-user

                tuple), which sendmail does not.


                  Sendmail is designed to  work  in  a  nonhomogeneous

             environment.  Every  attempt  is  made  to avoid imposing

             unnecessary constraints on the underlying  mailers.  This

             goal  has  driven  much  of  the design. One of the major

             problems has been the lack of a uniform address space, as

             postulated in [Postel79a] and [Postel79b].
             [6]This is similar to the NBS standard.

          SMM:9-26             SENDMAIL -- An Internetwork Mail Router

                  A nonuniform address space implies that a path  will

             be specified in all addresses, either explicitly (as part

             of the address) or implicitly (as with implied forwarding

             to  gateways). This restriction has the unpleasant effect

             of making replying  to  messages  exceedingly  difficult,

             since  there is no one "address" for any person, but only

             a way to get there from wherever you are.

                  Interfacing to mail programs that were not initially

             intended  to  be  applied  in an internet environment has

             been amazingly successful, and has reduced the job  to  a

             manageable task.

                  Sendmail has knowledge of a few  difficult  environ-

             ments  built in. It generates ARPANET FTP/SMTP compatible

             error  messages  (prepended  with   three-digit   numbers

             [Neigus73,  Postel74, Postel82]) as necessary, optionally

             generates UNIX-style "From" lines on the  front  of  mes-

             sages  for  some mailers, and knows how to parse the same

             lines on input. Also, error handling has an  option  cus-

             tomized for BerkNet.

                  The decision to avoid doing  any  type  of  delivery

             where   possible  (even,  or  perhaps  especially,  local

             delivery) has turned out to be a  good  idea.  Even  with

             local  delivery,  there are issues of the location of the

             mailbox, the format of the mailbox, the locking  protocol

             used,  etc., that are best decided by other programs. One

          SENDMAIL -- An Internetwork Mail Router             SMM:9-27

             surprisingly major annoyance in many internet mailers  is

             that  the  location and format of local mail is built in.

             The feeling seems to be that local mail is so common that

             it  should  be efficient. This feeling is not born out by

             our experience; on the contrary, the location and  format

             of mailboxes seems to vary widely from system to system.

                  The ability to automatically generate a response  to

             incoming  mail  (by  forwarding  mail to a program) seems

             useful ("I am on vacation until late August....") but can

             create  problems  such as forwarding loops (two people on

             vacation whose programs send notes back  and  forth,  for

             instance)  if these programs are not well written. A pro-

             gram could be written to do standard tasks correctly, but

             this would solve the general case.

                  It might be desirable to implement some form of load

             limiting.  I am unaware of any mail system that addresses

             this problem, nor am I aware of any  reasonable  solution

             at this time.

                  The  configuration  file  is  currently  practically

             inscrutable;  considerable  convenience could be realized

             with a higher-level format.

                  It seems clear that common protocols will be  chang-

             ing   soon   to  accommodate  changing  requirements  and

             environments. These changes will include modifications to

             the  message header (e.g., [NBS80]) or to the body of the

          SMM:9-28             SENDMAIL -- An Internetwork Mail Router

             message itself (such as  for  multimedia  messages  [Pos-

             tel80]).  Experience  indicates that these changes should

             be relatively trivial to integrate into the existing sys-


                  In tightly coupled environments, it would be nice to

             have   a   name   server  such  as  Grapvine  [Birrell82]

             integrated into the mail system. This would allow a  site

             such  as  "Berkeley"  to  appear as a single host, rather

             than as a collection of hosts, and would allow people  to

             move  transparently  among  machines  without  having  to

             change their addresses. Such a facility would require  an

             automatically updated database and some method of resolv-

             ing conflicts.  Ideally  this  would  be  effective  even

             without  all  hosts being under a single management. How-

             ever, it is not clear  whether  this  feature  should  be

             integrated  into  the aliasing facility or should be con-

             sidered a "value added" feature outside sendmail itself.

                  As a more interesting case, the  CSNET  name  server

             [Solomon81]  provides an facility that goes beyond a sin-

             gle tightly-coupled environment. Such  a  facility  would

             normally exist outside of sendmail however.


               Thanks are due to Kurt Shoens for his continual  cheer-

          ful  assistance and good advice, Bill Joy for pointing me in

          the correct direction (over and over), and Mark  Horton  for

          SENDMAIL -- An Internetwork Mail Router             SMM:9-29

          more  advice, prodding, and many of the good ideas. Kurt and

          Eric Schmidt are to be credited for using delivermail  as  a

          server  for  their  programs (Mail and BerkNet respectively)

          before any sane person should have, and making the necessary

          modifications  promptly  and happily. Eric gave me consider-

          able advice about the perils of network software which saved

          me  an unknown amount of work and grief. Mark did the origi-

          nal implementation of the DBM version of aliasing, installed

          the  VFORK code, wrote the current version of rmail, and was

          the person who really convinced me  to  put  the  work  into

          delivermail   to   turn  it  into  sendmail.  Kurt  deserves

          accolades for using sendmail when I  was  myself  afraid  to

          take the risk; how a person can continue to be so enthusias-

          tic in the face of so much bitter reality is beyond me.

               Kurt, Mark, Kirk McKusick,  Marvin  Solomon,  and  many

          others  have reviewed this paper, giving considerable useful


               Special thanks are reserved  for  Mike  Stonebraker  at

          Berkeley  and Bob Epstein at Britton-Lee, who both knowingly

          allowed me to put so much work into this project when  there

          were  so many other things I really should have been working



          [Birrell82]    Birrell, A. D., Levin, R.,  Needham,  R.  M.,

                         and Schroeder, M. D., "Grapevine: An Exercise

                         in Distributed Computing."  In  Comm.  A.C.M.

                         25, 4, April 82.

          [Borden79]     Borden, S., Gaines, R. S.,  and  Shapiro,  N.

                         Z.,  The  MH  Message Handling System: Users'

                         Manual. R-2367-PAF. Rand Corporation. October


          [Crocker77a]   Crocker, D. H., Vittal, J. J., Pogran, K. T.,

                         and  Henderson,  D.  A. Jr., Standard for the

                         Format of ARPA  Network  Text  Messages.  RFC

                         733,  NIC  41952.  In  [Feinler78].  November


          [Crocker77b]   Crocker, D. H., Framework  and  Functions  of

                         the  MS Personal Message System. R-2134-ARPA,

                         Rand Corporation, Santa  Monica,  California.


          [Crocker79]    Crocker,  D.  H.,  Szurkowski,  E.  S.,   and

                         Farber, D. J., An Internetwork Memo Distribu-

                         tion Facility -- MMDF. 6th Data Communication

                         Symposium, Asilomar. November 1979.

          SMM:9-30             SENDMAIL -- An Internetwork Mail Router

          SENDMAIL -- An Internetwork Mail Router             SMM:9-31

          [Crocker82]    Crocker, D. H., Standard for  the  Format  of

                         Arpa Internet Text Messages. RFC 822. Network

                         Information Center, SRI International,  Menlo

                         Park, California. August 1982.

          [Metcalfe76]   Metcalfe, R., and Boggs, D., "Ethernet:  Dis-

                         tributed  Packet Switching for Local Computer

                         Networks", Communications of the ACM  19,  7.

                         July 1976.

          [Feinler78]    Feinler, E., and Postel, J.  (eds.),  ARPANET

                         Protocol Handbook. NIC 7104, Network Informa-

                         tion Center, SRI International,  Menlo  Park,

                         California. 1978.

          [NBS80]        National Bureau of  Standards,  Specification

                         of  a  Draft  Message Format Standard. Report

                         No. ICST/CBOS 80-2. October 1980.

          [Neigus73]     Neigus, N., File Transfer  Protocol  for  the

                         ARPA   Network.   RFC   542,  NIC  17759.  In

                         [Feinler78]. August, 1973.

          [Nowitz78a]    Nowitz, D. A., and Lesk,  M.  E.,  A  Dial-Up

                         Network  of  UNIX Systems. Bell Laboratories.

                         In UNIX Programmer's Manual, Seventh Edition,

                         Volume 2. August, 1978.

          [Nowitz78b]    Nowitz, D. A., Uucp  Implementation  Descrip-

                         tion. Bell Laboratories. In UNIX Programmer's

          SMM:9-32             SENDMAIL -- An Internetwork Mail Router

                         Manual, Seventh Edition, Volume  2.  October,


          [Postel74]     Postel, J., and Neigus, N., Revised FTP Reply

                         Codes.  RFC  640,  NIC 30843. In [Feinler78].

                         June, 1974.

          [Postel77]     Postel, J.,  Mail  Protocol.  NIC  29588.  In

                         [Feinler78]. November 1977.

          [Postel79a]    Postel, J., Internet  Message  Protocol.  RFC

                         753,  IEN 85. Network Information Center, SRI

                         International, Menlo Park, California.  March


          [Postel79b]    Postel, J. B., An Internetwork Message Struc-

                         ture.  In  Proceedings of the Sixth Data Com-

                         munications  Symposium,   IEEE.   New   York.

                         November 1979.

          [Postel80]     Postel,  J.  B.,  A  Structured  Format   for

                         Transmission  of  Multi-Media  Documents. RFC

                         767. Network Information Center, SRI Interna-

                         tional, Menlo Park, California. August 1980.

          [Postel82]     Postel, J. B., Simple Mail Transfer Protocol.

                         RFC821  (obsoleting RFC788). Network Informa-

                         tion Center, SRI International,  Menlo  Park,

                         California. August 1982.

          SENDMAIL -- An Internetwork Mail Router             SMM:9-33

          [Schmidt79]    Schmidt, E., An Introduction to the  Berkeley

                         Network.  University  of California, Berkeley

                         California. 1979.

          [Shoens79]     Shoens, K., Mail Reference Manual. University

                         of California, Berkeley. In UNIX Programmer's

                         Manual, Seventh Edition, Volume 2C.  December


          [Sluizer81]    Sluizer, S., and Postel, J. B., Mail Transfer

                         Protocol.   RFC   780.   Network  Information

                         Center, SRI International, Menlo Park,  Cali-

                         fornia. May 1981.

          [Solomon81]    Solomon, M., Landweber,  L.,  and  Neuhengen,

                         D.,  "The  Design  of the CSNET Name Server."

                         CS-DN-2, University  of  Wisconsin,  Madison.

                         November 1981.

          [Su82]         Su, Zaw-Sing, and  Postel,  Jon,  The  Domain

                         Naming  Convention for Internet User Applica-

                         tions. RFC819.  Network  Information  Center,

                         SRI  International,  Menlo  Park, California.

                         August 1982.

          [UNIX83]       The UNIX Programmer's  Manual,  Seventh  Edi-

                         tion,  Virtual VAX-11 Version, Volume 1. Bell

                         Laboratories, modified by the  University  of

                         California,   Berkeley,   California.  March,

          SMM:9-34             SENDMAIL -- An Internetwork Mail Router


Generated on 2017-04-03 16:26:17 by $MirOS: src/scripts/roff2htm,v 1.88 2017/01/29 00:51:06 tg Exp $

These manual pages and other documentation are copyrighted by their respective writers; their source is available at our CVSweb, AnonCVS, and other mirrors. The rest is Copyright © 2002–2017 The MirOS Project, Germany.
This product includes material provided by mirabilos.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report — diffs preferred.