The C Preprocessor

Table of Contents


Next: , Up: (dir)

The C Preprocessor

The C preprocessor implements the macro language used to transform C, C++, and Objective-C programs before they are compiled. It can also be useful on its own.

--- The Detailed Node Listing ---

Overview

Header Files

Macros

Predefined Macros

Macro Pitfalls

Conditionals

Conditional Syntax

Implementation Details

Obsolete Features

Copyright © 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.

Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation. A copy of the license is included in the section entitled “GNU Free Documentation License”.

This manual contains no Invariant Sections. The Front-Cover Texts are (a) (see below), and the Back-Cover Texts are (b) (see below).

(a) The FSF's Front-Cover Text is:

A GNU Manual

(b) The FSF's Back-Cover Text is:

You have freedom to copy and modify this GNU Manual, like GNU software. Copies published by the Free Software Foundation raise funds for GNU development.


Next: , Previous: Top, Up: Top

1 Overview

The C preprocessor, often known as cpp, is a macro processor that is used automatically by the C compiler to transform your program before compilation. It is called a macro processor because it allows you to define macros, which are brief abbreviations for longer constructs.

The C preprocessor is intended to be used only with C, C++, and Objective-C source code. In the past, it has been abused as a general text processor. It will choke on input which does not obey C's lexical rules. For example, apostrophes will be interpreted as the beginning of character constants, and cause errors. Also, you cannot rely on it preserving characteristics of the input which are not significant to C-family languages. If a Makefile is preprocessed, all the hard tabs will be removed, and the Makefile will not work.

Having said that, you can often get away with using cpp on things which are not C. Other Algol-ish programming languages are often safe (Pascal, Ada, etc.) So is assembly, with caution. -traditional-cpp mode preserves more white space, and is otherwise more permissive. Many of the problems can be avoided by writing C or C++ style comments instead of native language comments, and keeping macros simple.

Wherever possible, you should use a preprocessor geared to the language you are writing in. Modern versions of the GNU assembler have macro facilities. Most high level programming languages have their own conditional compilation and inclusion mechanism. If all else fails, try a true general text processor, such as GNU M4.

C preprocessors vary in some details. This manual discusses the GNU C preprocessor, which provides a small superset of the features of ISO Standard C. In its default mode, the GNU C preprocessor does not do a few things required by the standard. These are features which are rarely, if ever, used, and may cause surprising changes to the meaning of a program which does not expect them. To get strict ISO Standard C, you should use the -std=c89 or -std=c99 options, depending on which version of the standard you want. To get all the mandatory diagnostics, you must also use -pedantic. See Invocation.

This manual describes the behavior of the ISO preprocessor. To minimize gratuitous differences, where the ISO preprocessor's behavior does not conflict with traditional semantics, the traditional preprocessor should behave the same way. The various differences that do exist are detailed in the section Traditional Mode.

For clarity, unless noted otherwise, references to `CPP' in this manual refer to GNU CPP.


Next: , Up: Overview

1.1 Character sets

Source code character set processing in C and related languages is rather complicated. The C standard discusses two character sets, but there are really at least four.

The files input to CPP might be in any character set at all. CPP's very first action, before it even looks for line boundaries, is to convert the file into the character set it uses for internal processing. That set is what the C standard calls the source character set. It must be isomorphic with ISO 10646, also known as Unicode. CPP uses the UTF-8 encoding of Unicode.

At present, GNU CPP does not implement conversion from arbitrary file encodings to the source character set. Use of any encoding other than plain ASCII or UTF-8, except in comments, will cause errors. Use of encodings that are not strict supersets of ASCII, such as Shift JIS, may cause errors even if non-ASCII characters appear only in comments. We plan to fix this in the near future.

All preprocessing work (the subject of the rest of this manual) is carried out in the source character set. If you request textual output from the preprocessor with the -E option, it will be in UTF-8.

After preprocessing is complete, string and character constants are converted again, into the execution character set. This character set is under control of the user; the default is UTF-8, matching the source character set. Wide string and character constants have their own character set, which is not called out specifically in the standard. Again, it is under control of the user. The default is UTF-16 or UTF-32, whichever fits in the target's wchar_t type, in the target machine's byte order.1 Octal and hexadecimal escape sequences do not undergo conversion; '\x12' has the value 0x12 regardless of the currently selected execution character set. All other escapes are replaced by the character in the source character set that they represent, then converted to the execution character set, just like unescaped characters.

GCC does not permit the use of characters outside the ASCII range, nor `\u' and `\U' escapes, in identifiers. We hope this will change eventually, but there are problems with the standard semantics of such “extended identifiers” which must be resolved through the ISO C and C++ committees first.


Next: , Previous: Character sets, Up: Overview

1.2 Initial processing

The preprocessor performs a series of textual transformations on its input. These happen before all other processing. Conceptually, they happen in a rigid order, and the entire file is run through each transformation before the next one begins. CPP actually does them all at once, for performance reasons. These transformations correspond roughly to the first three “phases of translation” described in the C standard.

  1. The input file is read into memory and broken into lines.

    Different systems use different conventions to indicate the end of a line. GCC accepts the ASCII control sequences LF, CR LF and CR as end-of-line markers. These are the canonical sequences used by Unix, DOS and VMS, and the classic Mac OS (before OSX) respectively. You may therefore safely copy source code written on any of those systems to a different one and use it without conversion. (GCC may lose track of the current line number if a file doesn't consistently use one convention, as sometimes happens when it is edited on computers with different conventions that share a network file system.)

    If the last line of any input file lacks an end-of-line marker, the end of the file is considered to implicitly supply one. The C standard says that this condition provokes undefined behavior, so GCC will emit a warning message.

  2. If trigraphs are enabled, they are replaced by their corresponding single characters. By default GCC ignores trigraphs, but if you request a strictly conforming mode with the -std option, or you specify the -trigraphs option, then it converts them.

    These are nine three-character sequences, all starting with `??', that are defined by ISO C to stand for single characters. They permit obsolete systems that lack some of C's punctuation to use C. For example, `??/' stands for `\', so '??/n' is a character constant for a newline.

    Trigraphs are not popular and many compilers implement them incorrectly. Portable code should not rely on trigraphs being either converted or ignored. With -Wtrigraphs GCC will warn you when a trigraph may change the meaning of your program if it were converted. See Wtrigraphs.

    In a string constant, you can prevent a sequence of question marks from being confused with a trigraph by inserting a backslash between the question marks, or by separating the string literal at the trigraph and making use of string literal concatenation. "(??\?)" is the string `(???)', not `(?]'. Traditional C compilers do not recognize these idioms.

    The nine trigraphs and their replacements are

              Trigraph:       ??(  ??)  ??<  ??>  ??=  ??/  ??'  ??!  ??-
              Replacement:      [    ]    {    }    #    \    ^    |    ~
         
  3. Continued lines are merged into one long line.

    A continued line is a line which ends with a backslash, `\'. The backslash is removed and the following line is joined with the current one. No space is inserted, so you may split a line anywhere, even in the middle of a word. (It is generally more readable to split lines only at white space.)

    The trailing backslash on a continued line is commonly referred to as a backslash-newline.

    If there is white space between a backslash and the end of a line, that is still a continued line. However, as this is usually the result of an editing mistake, and many compilers will not accept it as a continued line, GCC will warn you about it.

  4. All comments are replaced with single spaces.

    There are two kinds of comments. Block comments begin with `/*' and continue until the next `*/'. Block comments do not nest:

              /* this is /* one comment */ text outside comment
         

    Line comments begin with `//' and continue to the end of the current line. Line comments do not nest either, but it does not matter, because they would end in the same place anyway.

              // this is // one comment
              text outside comment
         

It is safe to put line comments inside block comments, or vice versa.

     /* block comment
        // contains line comment
        yet more comment
      */ outside comment
     
     // line comment /* contains block comment */

But beware of commenting out one end of a block comment with a line comment.

      // l.c.  /* block comment begins
         oops! this isn't a comment anymore */

Comments are not recognized within string literals. "/* blah */" is the string constant `/* blah */', not an empty string.

Line comments are not in the 1989 edition of the C standard, but they are recognized by GCC as an extension. In C++ and in the 1999 edition of the C standard, they are an official part of the language.

Since these transformations happen before all other processing, you can split a line mechanically with backslash-newline anywhere. You can comment out the end of a line. You can continue a line comment onto the next line with backslash-newline. You can even split `/*', `*/', and `//' onto multiple lines with backslash-newline. For example:

     /\
     *
     */ # /*
     */ defi\
     ne FO\
     O 10\
     20

is equivalent to #define FOO 1020. All these tricks are extremely confusing and should not be used in code intended to be readable.

There is no way to prevent a backslash at the end of a line from being interpreted as a backslash-newline. This cannot affect any correct program, however.


Next: , Previous: Initial processing, Up: Overview

1.3 Tokenization

After the textual transformations are finished, the input file is converted into a sequence of preprocessing tokens. These mostly correspond to the syntactic tokens used by the C compiler, but there are a few differences. White space separates tokens; it is not itself a token of any kind. Tokens do not have to be separated by white space, but it is often necessary to avoid ambiguities.

When faced with a sequence of characters that has more than one possible tokenization, the preprocessor is greedy. It always makes each token, starting from the left, as big as possible before moving on to the next token. For instance, a+++++b is interpreted as a ++ ++ + b, not as a ++ + ++ b, even though the latter tokenization could be part of a valid C program and the former could not.

Once the input file is broken into tokens, the token boundaries never change, except when the `##' preprocessing operator is used to paste tokens together. See Concatenation. For example,

     #define foo() bar
     foo()baz
          ==> bar baz
     not
          ==> barbaz

The compiler does not re-tokenize the preprocessor's output. Each preprocessing token becomes one compiler token.

Preprocessing tokens fall into five broad classes: identifiers, preprocessing numbers, string literals, punctuators, and other. An identifier is the same as an identifier in C: any sequence of letters, digits, or underscores, which begins with a letter or underscore. Keywords of C have no significance to the preprocessor; they are ordinary identifiers. You can define a macro whose name is a keyword, for instance. The only identifier which can be considered a preprocessing keyword is defined. See Defined.

This is mostly true of other languages which use the C preprocessor. However, a few of the keywords of C++ are significant even in the preprocessor. See C++ Named Operators.

In the 1999 C standard, identifiers may contain letters which are not part of the “basic source character set,” at the implementation's discretion (such as accented Latin letters, Greek letters, or Chinese ideograms). This may be done with an extended character set, or the `\u' and `\U' escape sequences. GCC does not presently implement either feature in the preprocessor or the compiler.

As an extension, GCC treats `$' as a letter. This is for compatibility with some systems, such as VMS, where `$' is commonly used in system-defined function and object names. `$' is not a letter in strictly conforming mode, or if you specify the -$ option. See Invocation.

A preprocessing number has a rather bizarre definition. The category includes all the normal integer and floating point constants one expects of C, but also a number of other things one might not initially recognize as a number. Formally, preprocessing numbers begin with an optional period, a required decimal digit, and then continue with any sequence of letters, digits, underscores, periods, and exponents. Exponents are the two-character sequences `e+', `e-', `E+', `E-', `p+', `p-', `P+', and `P-'. (The exponents that begin with `p' or `P' are new to C99. They are used for hexadecimal floating-point constants.)

The purpose of this unusual definition is to isolate the preprocessor from the full complexity of numeric constants. It does not have to distinguish between lexically valid and invalid floating-point numbers, which is complicated. The definition also permits you to split an identifier at any position and get exactly two tokens, which can then be pasted back together with the `##' operator.

It's possible for preprocessing numbers to cause programs to be misinterpreted. For example, 0xE+12 is a preprocessing number which does not translate to any valid numeric constant, therefore a syntax error. It does not mean 0xE + 12, which is what you might have intended.

String literals are string constants, character constants, and header file names (the argument of `#include').2 String constants and character constants are straightforward: "..." or '...'. In either case embedded quotes should be escaped with a backslash: '\'' is the character constant for `''. There is no limit on the length of a character constant, but the value of a character constant that contains more than one character is implementation-defined. See Implementation Details.

Header file names either look like string constants, "...", or are written with angle brackets instead, <...>. In either case, backslash is an ordinary character. There is no way to escape the closing quote or angle bracket. The preprocessor looks for the header file in different places depending on which form you use. See Include Operation.

No string literal may extend past the end of a line. Older versions of GCC accepted multi-line string constants. You may use continued lines instead, or string constant concatenation. See Differences from previous versions.

Punctuators are all the usual bits of punctuation which are meaningful to C and C++. All but three of the punctuation characters in ASCII are C punctuators. The exceptions are `@', `$', and ``'. In addition, all the two- and three-character operators are punctuators. There are also six digraphs, which the C++ standard calls alternative tokens, which are merely alternate ways to spell other punctuators. This is a second attempt to work around missing punctuation in obsolete systems. It has no negative side effects, unlike trigraphs, but does not cover as much ground. The digraphs and their corresponding normal punctuators are:

     Digraph:        <%  %>  <:  :>  %:  %:%:
     Punctuator:      {   }   [   ]   #    ##

Any other single character is considered “other.” It is passed on to the preprocessor's output unmolested. The C compiler will almost certainly reject source code containing “other” tokens. In ASCII, the only other characters are `@', `$', ``', and control characters other than NUL (all bits zero). (Note that `$' is normally considered a letter.) All characters with the high bit set (numeric range 0x7F–0xFF) are also “other” in the present implementation. This will change when proper support for international character sets is added to GCC.

NUL is a special case because of the high probability that its appearance is accidental, and because it may be invisible to the user (many terminals do not display NUL at all). Within comments, NULs are silently ignored, just as any other character would be. In running text, NUL is considered white space. For example, these two directives have the same meaning.

     #define X^@1
     #define X 1

(where `^@' is ASCII NUL). Within string or character constants, NULs are preserved. In the latter two cases the preprocessor emits a warning message.


Previous: Tokenization, Up: Overview

1.4 The preprocessing language

After tokenization, the stream of tokens may simply be passed straight to the compiler's parser. However, if it contains any operations in the preprocessing language, it will be transformed first. This stage corresponds roughly to the standard's “translation phase 4” and is what most people think of as the preprocessor's job.

The preprocessing language consists of directives to be executed and macros to be expanded. Its primary capabilities are:

There are a few more, less useful, features.

Except for expansion of predefined macros, all these operations are triggered with preprocessing directives. Preprocessing directives are lines in your program that start with `#'. Whitespace is allowed before and after the `#'. The `#' is followed by an identifier, the directive name. It specifies the operation to perform. Directives are commonly referred to as `#name' where name is the directive name. For example, `#define' is the directive that defines a macro.

The `#' which begins a directive cannot come from a macro expansion. Also, the directive name is not macro expanded. Thus, if foo is defined as a macro expanding to define, that does not make `#foo' a valid preprocessing directive.

The set of valid directive names is fixed. Programs cannot define new preprocessing directives.

Some directives require arguments; these make up the rest of the directive line and must be separated from the directive name by whitespace. For example, `#define' must be followed by a macro name and the intended expansion of the macro.

A preprocessing directive cannot cover more than one line. The line may, however, be continued with backslash-newline, or by a block comment which extends past the end of the line. In either case, when the directive is processed, the continuations have already been merged with the first line to make one long line.


Next: , Previous: Overview, Up: Top

2 Header Files

A header file is a file containing C declarations and macro definitions (see Macros) to be shared between several source files. You request the use of a header file in your program by including it, with the C preprocessing directive `#include'.

Header files serve two purposes.

Including a header file produces the same results as copying the header file into each source file that needs it. Such copying would be time-consuming and error-prone. With a header file, the related declarations appear in only one place. If they need to be changed, they can be changed in one place, and programs that include the header file will automatically use the new version when next recompiled. The header file eliminates the labor of finding and changing all the copies as well as the risk that a failure to find one copy will result in inconsistencies within a program.

In C, the usual convention is to give header files names that end with .h. It is most portable to use only letters, digits, dashes, and underscores in header file names, and at most one dot.


Next: , Up: Header Files

2.1 Include Syntax

Both user and system header files are included using the preprocessing directive `#include'. It has two variants:

#include <file>
This variant is used for system header files. It searches for a file named file in a standard list of system directories. You can prepend directories to this list with the -I option (see Invocation).
#include "file"
This variant is used for header files of your own program. It searches for a file named file first in the directory containing the current file, then in the same directories used for <file>.

The argument of `#include', whether delimited with quote marks or angle brackets, behaves like a string constant in that comments are not recognized, and macro names are not expanded. Thus, #include <x/*y> specifies inclusion of a system header file named x/*y.

However, if backslashes occur within file, they are considered ordinary text characters, not escape characters. None of the character escape sequences appropriate to string constants in C are processed. Thus, #include "x\n\\y" specifies a filename containing three backslashes. (Some systems interpret `\' as a pathname separator. All of these also interpret `/' the same way. It is most portable to use only `/'.)

It is an error if there is anything (other than comments) on the line after the file name.


Next: , Previous: Include Syntax, Up: Header Files

2.2 Include Operation

The `#include' directive works by directing the C preprocessor to scan the specified file as input before continuing with the rest of the current file. The output from the preprocessor contains the output already generated, followed by the output resulting from the included file, followed by the output that comes from the text after the `#include' directive. For example, if you have a header file header.h as follows,

     char *test (void);

and a main program called program.c that uses the header file, like this,

     int x;
     #include "header.h"
     
     int
     main (void)
     {
       puts (test ());
     }

the compiler will see the same token stream as it would if program.c read

     int x;
     char *test (void);
     
     int
     main (void)
     {
       puts (test ());
     }

Included files are not limited to declarations and macro definitions; those are merely the typical uses. Any fragment of a C program can be included from another file. The include file could even contain the beginning of a statement that is concluded in the containing file, or the end of a statement that was started in the including file. However, an included file must consist of complete tokens. Comments and string literals which have not been closed by the end of an included file are invalid. For error recovery, they are considered to end at the end of the file.

To avoid confusion, it is best if header files contain only complete syntactic units—function declarations or definitions, type declarations, etc.

The line following the `#include' directive is always treated as a separate line by the C preprocessor, even if the included file lacks a final newline.


Next: , Previous: Include Operation, Up: Header Files

2.3 Search Path

GCC looks in several different places for headers. On a normal Unix system, if you do not instruct it otherwise, it will look for headers requested with #include <file> in:

     /usr/local/include
     libdir/gcc/target/version/include
     /usr/target/include
     /usr/include

On MirOS, installed as the system compiler, it will not look for headers in /usr/local/include, only searching system paths.

For C++ programs, it will also look in /usr/include/g++-v3, first. In the above, target is the canonical name of the system GCC was configured to compile code for; often but not always the same as the canonical name of the system it runs on. version is the version of GCC in use.

You can add to this list with the -Idir command line option. All the directories named by -I are searched, in left-to-right order, before the default directories. The only exception is when dir is already searched by default. In this case, the option is ignored and the search order for system directories remains unchanged.

Duplicate directories are removed from the quote and bracket search chains before the two chains are merged to make the final search chain. Thus, it is possible for a directory to occur twice in the final search chain if it was specified in both the quote and bracket chains.

You can prevent GCC from searching any of the default directories with the -nostdinc option. This is useful when you are compiling an operating system kernel or some other program that does not use the standard C library facilities, or the standard C library itself. -I options are not ignored as described above when -nostdinc is in effect.

GCC looks for headers requested with #include "file" first in the directory containing the current file, then in the same places it would have looked for a header requested with angle brackets. For example, if /usr/include/sys/stat.h contains #include "types.h", GCC looks for types.h first in /usr/include/sys, then in its usual search path.

`#line' (see Line Control) does not change GCC's idea of the directory containing the current file.

You may put -I- at any point in your list of -I options. This has two effects. First, directories appearing before the -I- in the list are searched only for headers requested with quote marks. Directories after -I- are searched for all headers. Second, the directory containing the current file is not searched for anything, unless it happens to be one of the directories named by an -I switch.

-I. -I- is not the same as no -I options at all, and does not cause the same behavior for `<>' includes that `""' includes get with no special options. -I. searches the compiler's current working directory for header files. That may or may not be the same as the directory containing the current file.

If you need to look for headers in a directory named -, write -I./-.

There are several more ways to adjust the header search path. They are generally less useful. See Invocation.


Next: , Previous: Search Path, Up: Header Files

2.4 Once-Only Headers

If a header file happens to be included twice, the compiler will process its contents twice. This is very likely to cause an error, e.g. when the compiler sees the same structure definition twice. Even if it does not, it will certainly waste time.

The standard way to prevent this is to enclose the entire real contents of the file in a conditional, like this:

     /* File foo.  */
     #ifndef FILE_FOO_SEEN
     #define FILE_FOO_SEEN
     
     the entire file
     
     #endif /* !FILE_FOO_SEEN */

This construct is commonly known as a wrapper #ifndef. When the header is included again, the conditional will be false, because FILE_FOO_SEEN is defined. The preprocessor will skip over the entire contents of the file, and the compiler will not see it twice.

CPP optimizes even further. It remembers when a header file has a wrapper `#ifndef'. If a subsequent `#include' specifies that header, and the macro in the `#ifndef' is still defined, it does not bother to rescan the file at all.

You can put comments outside the wrapper. They will not interfere with this optimization.

The macro FILE_FOO_SEEN is called the controlling macro or guard macro. In a user header file, the macro name should not begin with `_'. In a system header file, it should begin with `__' to avoid conflicts with user programs. In any kind of header file, the macro name should contain the name of the file and some additional text, to avoid conflicts with other header files.


Next: , Previous: Once-Only Headers, Up: Header Files

2.5 Computed Includes

Sometimes it is necessary to select one of several different header files to be included into your program. They might specify configuration parameters to be used on different sorts of operating systems, for instance. You could do this with a series of conditionals,

     #if SYSTEM_1
     # include "system_1.h"
     #elif SYSTEM_2
     # include "system_2.h"
     #elif SYSTEM_3
     ...
     #endif

That rapidly becomes tedious. Instead, the preprocessor offers the ability to use a macro for the header name. This is called a computed include. Instead of writing a header name as the direct argument of `#include', you simply put a macro name there instead:

     #define SYSTEM_H "system_1.h"
     ...
     #include SYSTEM_H

SYSTEM_H will be expanded, and the preprocessor will look for system_1.h as if the `#include' had been written that way originally. SYSTEM_H could be defined by your Makefile with a -D option.

You must be careful when you define the macro. `#define' saves tokens, not text. The preprocessor has no way of knowing that the macro will be used as the argument of `#include', so it generates ordinary tokens, not a header name. This is unlikely to cause problems if you use double-quote includes, which are close enough to string constants. If you use angle brackets, however, you may have trouble.

The syntax of a computed include is actually a bit more general than the above. If the first non-whitespace character after `#include' is not `"' or `<', then the entire line is macro-expanded like running text would be.

If the line expands to a single string constant, the contents of that string constant are the file to be included. CPP does not re-examine the string for embedded quotes, but neither does it process backslash escapes in the string. Therefore

     #define HEADER "a\"b"
     #include HEADER

looks for a file named a\"b. CPP searches for the file according to the rules for double-quoted includes.

If the line expands to a token stream beginning with a `<' token and including a `>' token, then the tokens between the `<' and the first `>' are combined to form the filename to be included. Any whitespace between tokens is reduced to a single space; then any space after the initial `<' is retained, but a trailing space before the closing `>' is ignored. CPP searches for the file according to the rules for angle-bracket includes.

In either case, if there are any tokens on the line after the file name, an error occurs and the directive is not processed. It is also an error if the result of expansion does not match either of the two expected forms.

These rules are implementation-defined behavior according to the C standard. To minimize the risk of different compilers interpreting your computed includes differently, we recommend you use only a single object-like macro which expands to a string constant. This will also minimize confusion for people reading your program.


Next: , Previous: Computed Includes, Up: Header Files

2.6 Wrapper Headers

Sometimes it is necessary to adjust the contents of a system-provided header file without editing it directly. GCC's fixincludes operation does this, for example. One way to do that would be to create a new header file with the same name and insert it in the search path before the original header. That works fine as long as you're willing to replace the old header entirely. But what if you want to refer to the old header from the new one?

You cannot simply include the old header with `#include'. That will start from the beginning, and find your new header again. If your header is not protected from multiple inclusion (see Once-Only Headers), it will recurse infinitely and cause a fatal error.

You could include the old header with an absolute pathname:

     #include "/usr/include/old-header.h"

This works, but is not clean; should the system headers ever move, you would have to edit the new headers to match.

There is no way to solve this problem within the C standard, but you can use the GNU extension `#include_next'. It means, “Include the next file with this name.” This directive works like `#include' except in searching for the specified file: it starts searching the list of header file directories after the directory in which the current file was found.

Suppose you specify -I /usr/local/include, and the list of directories to search also includes /usr/include; and suppose both directories contain signal.h. Ordinary #include <signal.h> finds the file under /usr/local/include. If that file contains #include_next <signal.h>, it starts searching after that directory, and finds the file in /usr/include.

`#include_next' does not distinguish between <file> and "file" inclusion, nor does it check that the file you specify has the same name as the current file. It simply looks for the file named, starting with the directory in the search path after the one where the current file was found.

The use of `#include_next' can lead to great confusion. We recommend it be used only when there is no other alternative. In particular, it should not be used in the headers belonging to a specific program; it should be used only to make global corrections along the lines of fixincludes.


Previous: Wrapper Headers, Up: Header Files

2.7 System Headers

The header files declaring interfaces to the operating system and runtime libraries often cannot be written in strictly conforming C. Therefore, GCC gives code found in system headers special treatment. All warnings, other than those generated by `#warning' (see Diagnostics), are suppressed while GCC is processing a system header. Macros defined in a system header are immune to a few warnings wherever they are expanded. This immunity is granted on an ad-hoc basis, when we find that a warning generates lots of false positives because of code in macros defined in system headers.

Normally, only the headers found in specific directories are considered system headers. These directories are determined when GCC is compiled. There are, however, two ways to make normal headers into system headers.

The -isystem command line option adds its argument to the list of directories to search for headers, just like -I. Any headers found in that directory will be considered system headers.

All directories named by -isystem are searched after all directories named by -I, no matter what their order was on the command line. If the same directory is named by both -I and -isystem, the -I option is ignored. GCC provides an informative message when this occurs if -v is used.

There is also a directive, #pragma GCC system_header, which tells GCC to consider the rest of the current include file a system header, no matter where it was found. Code that comes before the `#pragma' in the file will not be affected. #pragma GCC system_header has no effect in the primary source file.

On very old systems, some of the pre-defined system header directories get even more special treatment. GNU C++ considers code in headers found in those directories to be surrounded by an extern "C" block. There is no way to request this behavior with a `#pragma', or from the command line.


Next: , Previous: Header Files, Up: Top

3 Macros

A macro is a fragment of code which has been given a name. Whenever the name is used, it is replaced by the contents of the macro. There are two kinds of macros. They differ mostly in what they look like when they are used. Object-like macros resemble data objects when used, function-like macros resemble function calls.

You may define any valid identifier as a macro, even if it is a C keyword. The preprocessor does not know anything about keywords. This can be useful if you wish to hide a keyword such as const from an older compiler that does not understand it. However, the preprocessor operator defined (see Defined) can never be defined as a macro, and C++'s named operators (see C++ Named Operators) cannot be macros when you are compiling C++.


Next: , Up: Macros

3.1 Object-like Macros

An object-like macro is a simple identifier which will be replaced by a code fragment. It is called object-like because it looks like a data object in code that uses it. They are most commonly used to give symbolic names to numeric constants.

You create macros with the `#define' directive. `#define' is followed by the name of the macro and then the token sequence it should be an abbreviation for, which is variously referred to as the macro's body, expansion or replacement list. For example,

     #define BUFFER_SIZE 1024

defines a macro named BUFFER_SIZE as an abbreviation for the token 1024. If somewhere after this `#define' directive there comes a C statement of the form

     foo = (char *) malloc (BUFFER_SIZE);

then the C preprocessor will recognize and expand the macro BUFFER_SIZE. The C compiler will see the same tokens as it would if you had written

     foo = (char *) malloc (1024);

By convention, macro names are written in uppercase. Programs are easier to read when it is possible to tell at a glance which names are macros.

The macro's body ends at the end of the `#define' line. You may continue the definition onto multiple lines, if necessary, using backslash-newline. When the macro is expanded, however, it will all come out on one line. For example,

     #define NUMBERS 1, \
                     2, \
                     3
     int x[] = { NUMBERS };
          ==> int x[] = { 1, 2, 3 };

The most common visible consequence of this is surprising line numbers in error messages.

There is no restriction on what can go in a macro body provided it decomposes into valid preprocessing tokens. Parentheses need not balance, and the body need not resemble valid C code. (If it does not, you may get error messages from the C compiler when you use the macro.)

The C preprocessor scans your program sequentially. Macro definitions take effect at the place you write them. Therefore, the following input to the C preprocessor

     foo = X;
     #define X 4
     bar = X;

produces

     foo = X;
     bar = 4;

When the preprocessor expands a macro name, the macro's expansion replaces the macro invocation, then the expansion is examined for more macros to expand. For example,

     #define TABLESIZE BUFSIZE
     #define BUFSIZE 1024
     TABLESIZE
          ==> BUFSIZE
          ==> 1024

TABLESIZE is expanded first to produce BUFSIZE, then that macro is expanded to produce the final result, 1024.

Notice that BUFSIZE was not defined when TABLESIZE was defined. The `#define' for TABLESIZE uses exactly the expansion you specify—in this case, BUFSIZE—and does not check to see whether it too contains macro names. Only when you use TABLESIZE is the result of its expansion scanned for more macro names.

This makes a difference if you change the definition of BUFSIZE at some point in the source file. TABLESIZE, defined as shown, will always expand using the definition of BUFSIZE that is currently in effect:

     #define BUFSIZE 1020
     #define TABLESIZE BUFSIZE
     #undef BUFSIZE
     #define BUFSIZE 37

Now TABLESIZE expands (in two stages) to 37.

If the expansion of a macro contains its own name, either directly or via intermediate macros, it is not expanded again when the expansion is examined for more macros. This prevents infinite recursion. See Self-Referential Macros, for the precise details.


Next: , Previous: Object-like Macros, Up: Macros

3.2 Function-like Macros

You can also define macros whose use looks like a function call. These are called function-like macros. To define a function-like macro, you use the same `#define' directive, but you put a pair of parentheses immediately after the macro name. For example,

     #define lang_init()  c_init()
     lang_init()
          ==> c_init()

A function-like macro is only expanded if its name appears with a pair of parentheses after it. If you write just the name, it is left alone. This can be useful when you have a function and a macro of the same name, and you wish to use the function sometimes.

     extern void foo(void);
     #define foo() /* optimized inline version */
     ...
       foo();
       funcptr = foo;

Here the call to foo() will use the macro, but the function pointer will get the address of the real function. If the macro were to be expanded, it would cause a syntax error.

If you put spaces between the macro name and the parentheses in the macro definition, that does not define a function-like macro, it defines an object-like macro whose expansion happens to begin with a pair of parentheses.

     #define lang_init ()    c_init()
     lang_init()
          ==> () c_init()()

The first two pairs of parentheses in this expansion come from the macro. The third is the pair that was originally after the macro invocation. Since lang_init is an object-like macro, it does not consume those parentheses.


Next: , Previous: Function-like Macros, Up: Macros

3.3 Macro Arguments

Function-like macros can take arguments, just like true functions. To define a macro that uses arguments, you insert parameters between the pair of parentheses in the macro definition that make the macro function-like. The parameters must be valid C identifiers, separated by commas and optionally whitespace.

To invoke a macro that takes arguments, you write the name of the macro followed by a list of actual arguments in parentheses, separated by commas. The invocation of the macro need not be restricted to a single logical line—it can cross as many lines in the source file as you wish. The number of arguments you give must match the number of parameters in the macro definition. When the macro is expanded, each use of a parameter in its body is replaced by the tokens of the corresponding argument. (You need not use all of the parameters in the macro body.)

As an example, here is a macro that computes the minimum of two numeric values, as it is defined in many C programs, and some uses.

     #define min(X, Y)  ((X) < (Y) ? (X) : (Y))
       x = min(a, b);          ==>  x = ((a) < (b) ? (a) : (b));
       y = min(1, 2);          ==>  y = ((1) < (2) ? (1) : (2));
       z = min(a + 28, *p);    ==>  z = ((a + 28) < (*p) ? (a + 28) : (*p));

(In this small example you can already see several of the dangers of macro arguments. See Macro Pitfalls, for detailed explanations.)

Leading and trailing whitespace in each argument is dropped, and all whitespace between the tokens of an argument is reduced to a single space. Parentheses within each argument must balance; a comma within such parentheses does not end the argument. However, there is no requirement for square brackets or braces to balance, and they do not prevent a comma from separating arguments. Thus,

     macro (array[x = y, x + 1])

passes two arguments to macro: array[x = y and x + 1]. If you want to supply array[x = y, x + 1] as an argument, you can write it as array[(x = y, x + 1)], which is equivalent C code.

All arguments to a macro are completely macro-expanded before they are substituted into the macro body. After substitution, the complete text is scanned again for macros to expand, including the arguments. This rule may seem strange, but it is carefully designed so you need not worry about whether any function call is actually a macro invocation. You can run into trouble if you try to be too clever, though. See Argument Prescan, for detailed discussion.

For example, min (min (a, b), c) is first expanded to

       min (((a) < (b) ? (a) : (b)), (c))

and then to

     ((((a) < (b) ? (a) : (b))) < (c)
      ? (((a) < (b) ? (a) : (b)))
      : (c))

(Line breaks shown here for clarity would not actually be generated.)

You can leave macro arguments empty; this is not an error to the preprocessor (but many macros will then expand to invalid code). You cannot leave out arguments entirely; if a macro takes two arguments, there must be exactly one comma at the top level of its argument list. Here are some silly examples using min:

     min(, b)        ==> ((   ) < (b) ? (   ) : (b))
     min(a, )        ==> ((a  ) < ( ) ? (a  ) : ( ))
     min(,)          ==> ((   ) < ( ) ? (   ) : ( ))
     min((,),)       ==> (((,)) < ( ) ? ((,)) : ( ))
     
     min()      error--> macro "min" requires 2 arguments, but only 1 given
     min(,,)    error--> macro "min" passed 3 arguments, but takes just 2

Whitespace is not a preprocessing token, so if a macro foo takes one argument, foo () and foo ( ) both supply it an empty argument. Previous GNU preprocessor implementations and documentation were incorrect on this point, insisting that a function-like macro that takes a single argument be passed a space if an empty argument was required.

Macro parameters appearing inside string literals are not replaced by their corresponding actual arguments.

     #define foo(x) x, "x"
     foo(bar)        ==> bar, "x"


Next: , Previous: Macro Arguments, Up: Macros

3.4 Stringification

Sometimes you may want to convert a macro argument into a string constant. Parameters are not replaced inside string constants, but you can use the `#' preprocessing operator instead. When a macro parameter is used with a leading `#', the preprocessor replaces it with the literal text of the actual argument, converted to a string constant. Unlike normal parameter replacement, the argument is not macro-expanded first. This is called stringification.

There is no way to combine an argument with surrounding text and stringify it all together. Instead, you can write a series of adjacent string constants and stringified arguments. The preprocessor will replace the stringified arguments with string constants. The C compiler will then combine all the adjacent string constants into one long string.

Here is an example of a macro definition that uses stringification:

     #define WARN_IF(EXP) \
     do { if (EXP) \
             fprintf (stderr, "Warning: " #EXP "\n"); } \
     while (0)
     WARN_IF (x == 0);
          ==> do { if (x == 0)
                fprintf (stderr, "Warning: " "x == 0" "\n"); } while (0);

The argument for EXP is substituted once, as-is, into the if statement, and once, stringified, into the argument to fprintf. If x were a macro, it would be expanded in the if statement, but not in the string.

The do and while (0) are a kludge to make it possible to write WARN_IF (arg);, which the resemblance of WARN_IF to a function would make C programmers want to do; see Swallowing the Semicolon.

Stringification in C involves more than putting double-quote characters around the fragment. The preprocessor backslash-escapes the quotes surrounding embedded string constants, and all backslashes within string and character constants, in order to get a valid C string constant with the proper contents. Thus, stringifying p = "foo\n"; results in "p = \"foo\\n\";". However, backslashes that are not inside string or character constants are not duplicated: `\n' by itself stringifies to "\n".

All leading and trailing whitespace in text being stringified is ignored. Any sequence of whitespace in the middle of the text is converted to a single space in the stringified result. Comments are replaced by whitespace long before stringification happens, so they never appear in stringified text.

There is no way to convert a macro argument into a character constant.

If you want to stringify the result of expansion of a macro argument, you have to use two levels of macros.

     #define xstr(s) str(s)
     #define str(s) #s
     #define foo 4
     str (foo)
          ==> "foo"
     xstr (foo)
          ==> xstr (4)
          ==> str (4)
          ==> "4"

s is stringified when it is used in str, so it is not macro-expanded first. But s is an ordinary argument to xstr, so it is completely macro-expanded before xstr itself is expanded (see Argument Prescan). Therefore, by the time str gets to its argument, it has already been macro-expanded.


Next: , Previous: Stringification, Up: Macros

3.5 Concatenation

It is often useful to merge two tokens into one while expanding macros. This is called token pasting or token concatenation. The `##' preprocessing operator performs token pasting. When a macro is expanded, the two tokens on either side of each `##' operator are combined into a single token, which then replaces the `##' and the two original tokens in the macro expansion. Usually both will be identifiers, or one will be an identifier and the other a preprocessing number. When pasted, they make a longer identifier. This isn't the only valid case. It is also possible to concatenate two numbers (or a number and a name, such as 1.5 and e3) into a number. Also, multi-character operators such as += can be formed by token pasting.

However, two tokens that don't together form a valid token cannot be pasted together. For example, you cannot concatenate x with + in either order. If you try, the preprocessor issues a warning and emits the two tokens. Whether it puts white space between the tokens is undefined. It is common to find unnecessary uses of `##' in complex macros. If you get this warning, it is likely that you can simply remove the `##'.

Both the tokens combined by `##' could come from the macro body, but you could just as well write them as one token in the first place. Token pasting is most useful when one or both of the tokens comes from a macro argument. If either of the tokens next to an `##' is a parameter name, it is replaced by its actual argument before `##' executes. As with stringification, the actual argument is not macro-expanded first. If the argument is empty, that `##' has no effect.

Keep in mind that the C preprocessor converts comments to whitespace before macros are even considered. Therefore, you cannot create a comment by concatenating `/' and `*'. You can put as much whitespace between `##' and its operands as you like, including comments, and you can put comments in arguments that will be concatenated. However, it is an error if `##' appears at either end of a macro body.

Consider a C program that interprets named commands. There probably needs to be a table of commands, perhaps an array of structures declared as follows:

     struct command
     {
       char *name;
       void (*function) (void);
     };
     
     struct command commands[] =
     {
       { "quit", quit_command },
       { "help", help_command },
       ...
     };

It would be cleaner not to have to give each command name twice, once in the string constant and once in the function name. A macro which takes the name of a command as an argument can make this unnecessary. The string constant can be created with stringification, and the function name by concatenating the argument with `_command'. Here is how it is done:

     #define COMMAND(NAME)  { #NAME, NAME ## _command }
     
     struct command commands[] =
     {
       COMMAND (quit),
       COMMAND (help),
       ...
     };


Next: , Previous: Concatenation, Up: Macros

3.6 Variadic Macros

A macro can be declared to accept a variable number of arguments much as a function can. The syntax for defining the macro is similar to that of a function. Here is an example:

     #define eprintf(...) fprintf (stderr, __VA_ARGS__)

This kind of macro is called variadic. When the macro is invoked, all the tokens in its argument list after the last named argument (this macro has none), including any commas, become the variable argument. This sequence of tokens replaces the identifier __VA_ARGS__ in the macro body wherever it appears. Thus, we have this expansion:

     eprintf ("%s:%d: ", input_file, lineno)
          ==>  fprintf (stderr, "%s:%d: ", input_file, lineno)

The variable argument is completely macro-expanded before it is inserted into the macro expansion, just like an ordinary argument. You may use the `#' and `##' operators to stringify the variable argument or to paste its leading or trailing token with another token. (But see below for an important special case for `##'.)

If your macro is complicated, you may want a more descriptive name for the variable argument than __VA_ARGS__. CPP permits this, as an extension. You may write an argument name immediately before the `...'; that name is used for the variable argument. The eprintf macro above could be written

     #define eprintf(args...) fprintf (stderr, args)

using this extension. You cannot use __VA_ARGS__ and this extension in the same macro.

You can have named arguments as well as variable arguments in a variadic macro. We could define eprintf like this, instead:

     #define eprintf(format, ...) fprintf (stderr, format, __VA_ARGS__)

This formulation looks more descriptive, but unfortunately it is less flexible: you must now supply at least one argument after the format string. In standard C, you cannot omit the comma separating the named argument from the variable arguments. Furthermore, if you leave the variable argument empty, you will get a syntax error, because there will be an extra comma after the format string.

     eprintf("success!\n", );
          ==> fprintf(stderr, "success!\n", );

GNU CPP has a pair of extensions which deal with this problem. First, you are allowed to leave the variable argument out entirely:

     eprintf ("success!\n")
          ==> fprintf(stderr, "success!\n", );

Second, the `##' token paste operator has a special meaning when placed between a comma and a variable argument. If you write

     #define eprintf(format, ...) fprintf (stderr, format, ##__VA_ARGS__)

and the variable argument is left out when the eprintf macro is used, then the comma before the `##' will be deleted. This does not happen if you pass an empty argument, nor does it happen if the token preceding `##' is anything other than a comma.

     eprintf ("success!\n")
          ==> fprintf(stderr, "success!\n");

The above explanation is ambiguous about the case where the only macro parameter is a variable arguments parameter, as it is meaningless to try to distinguish whether no argument at all is an empty argument or a missing argument. In this case the C99 standard is clear that the comma must remain, however the existing GCC extension used to swallow the comma. So CPP retains the comma when conforming to a specific C standard, and drops it otherwise.

C99 mandates that the only place the identifier __VA_ARGS__ can appear is in the replacement list of a variadic macro. It may not be used as a macro name, macro argument name, or within a different type of macro. It may also be forbidden in open text; the standard is ambiguous. We recommend you avoid using it except for its defined purpose.

Variadic macros are a new feature in C99. GNU CPP has supported them for a long time, but only with a named variable argument (`args...', not `...' and __VA_ARGS__). If you are concerned with portability to previous versions of GCC, you should use only named variable arguments. On the other hand, if you are concerned with portability to other conforming implementations of C99, you should use only __VA_ARGS__.

Previous versions of CPP implemented the comma-deletion extension much more generally. We have restricted it in this release to minimize the differences from C99. To get the same effect with both this and previous versions of GCC, the token preceding the special `##' must be a comma, and there must be white space between that comma and whatever comes immediately before it:

     #define eprintf(format, args...) fprintf (stderr, format , ##args)

See Differences from previous versions, for the gory details.


Next: , Previous: Variadic Macros, Up: Macros

3.7 Predefined Macros

Several object-like macros are predefined; you use them without supplying their definitions. They fall into three classes: standard, common, and system-specific.

In C++, there is a fourth category, the named operators. They act like predefined macros, but you cannot undefine them.


Next: , Up: Predefined Macros

3.7.1 Standard Predefined Macros

The standard predefined macros are specified by the relevant language standards, so they are available with all compilers that implement those standards. Older compilers may not provide all of them. Their names all start with double underscores.

__FILE__
This macro expands to the name of the current input file, in the form of a C string constant. This is the path by which the preprocessor opened the file, not the short name specified in `#include' or as the input file name argument. For example, "/usr/local/include/myheader.h" is a possible expansion of this macro.
__LINE__
This macro expands to the current input line number, in the form of a decimal integer constant. While we call it a predefined macro, it's a pretty strange macro, since its “definition” changes with each new line of source code.

__FILE__ and __LINE__ are useful in generating an error message to report an inconsistency detected by the program; the message can state the source line at which the inconsistency was detected. For example,

     fprintf (stderr, "Internal error: "
                      "negative string length "
                      "%d at %s, line %d.",
              length, __FILE__, __LINE__);

An `#include' directive changes the expansions of __FILE__ and __LINE__ to correspond to the included file. At the end of that file, when processing resumes on the input file that contained the `#include' directive, the expansions of __FILE__ and __LINE__ revert to the values they had before the `#include' (but __LINE__ is then incremented by one as processing moves to the line after the `#include').

A `#line' directive changes __LINE__, and may change __FILE__ as well. See Line Control.

C99 introduces __func__, and GCC has provided __FUNCTION__ for a long time. Both of these are strings containing the name of the current function (there are slight semantic differences; see the GCC manual). Neither of them is a macro; the preprocessor does not know the name of the current function. They tend to be useful in conjunction with __FILE__ and __LINE__, though.

__DATE__
This macro expands to a string constant that describes the date on which the preprocessor is being run. The string constant contains eleven characters and looks like "Feb 12 1996". If the day of the month is less than 10, it is padded with a space on the left.

If GCC cannot determine the current date, it will emit a warning message (once per compilation) and __DATE__ will expand to "??? ?? ????".

__TIME__
This macro expands to a string constant that describes the time at which the preprocessor is being run. The string constant contains eight characters and looks like "23:59:01".

If GCC cannot determine the current time, it will emit a warning message (once per compilation) and __TIME__ will expand to "??:??:??".

__STDC__
In normal operation, this macro expands to the constant 1, to signify that this compiler conforms to ISO Standard C. If GNU CPP is used with a compiler other than GCC, this is not necessarily true; however, the preprocessor always conforms to the standard unless the -traditional-cpp option is used.

This macro is not defined if the -traditional-cpp option is used.

On some hosts, the system compiler uses a different convention, where __STDC__ is normally 0, but is 1 if the user specifies strict conformance to the C Standard. CPP follows the host convention when processing system header files, but when processing user files __STDC__ is always 1. This has been reported to cause problems; for instance, some versions of Solaris provide X Windows headers that expect __STDC__ to be either undefined or 1. See Invocation.

__STDC_VERSION__
This macro expands to the C Standard's version number, a long integer constant of the form yyyymmL where yyyy and mm are the year and month of the Standard version. This signifies which version of the C Standard the compiler conforms to. Like __STDC__, this is not necessarily accurate for the entire implementation, unless GNU CPP is being used with GCC.

The value 199409L signifies the 1989 C standard as amended in 1994, which is the current default; the value 199901L signifies the 1999 revision of the C standard. Support for the 1999 revision is not yet complete.

This macro is not defined if the -traditional-cpp option is used, nor when compiling C++ or Objective-C.

__STDC_HOSTED__
This macro is defined, with value 1, if the compiler's target is a hosted environment. A hosted environment has the complete facilities of the standard C library available.
__cplusplus
This macro is defined when the C++ compiler is in use. You can use __cplusplus to test whether a header is compiled by a C compiler or a C++ compiler. This macro is similar to __STDC_VERSION__, in that it expands to a version number. A fully conforming implementation of the 1998 C++ standard will define this macro to 199711L. The GNU C++ compiler is not yet fully conforming, so it uses 1 instead. It is hoped to complete the implementation of standard C++ in the near future.
__OBJC__
This macro is defined, with value 1, when the Objective-C compiler is in use. You can use __OBJC__ to test whether a header is compiled by a C compiler or a Objective-C compiler.
__ASSEMBLER__
This macro is defined with value 1 when preprocessing assembly language.


Next: , Previous: Standard Predefined Macros, Up: Predefined Macros

3.7.2 Common Predefined Macros

The common predefined macros are GNU C extensions. They are available with the same meanings regardless of the machine or operating system on which you are using GNU C. Their names all start with double underscores.

__GNUC__
__GNUC_MINOR__
__GNUC_PATCHLEVEL__
These macros are defined by all GNU compilers that use the C preprocessor: C, C++, and Objective-C. Their values are the major version, minor version, and patch level of the compiler, as integer constants. For example, GCC 3.2.1 will define __GNUC__ to 3, __GNUC_MINOR__ to 2, and __GNUC_PATCHLEVEL__ to 1. They are defined only when the entire compiler is in use; if you invoke the preprocessor directly, they are not defined.

__GNUC_PATCHLEVEL__ is new to GCC 3.0; it is also present in the widely-used development snapshots leading up to 3.0 (which identify themselves as GCC 2.96 or 2.97, depending on which snapshot you have).

If all you need to know is whether or not your program is being compiled by GCC, you can simply test __GNUC__. If you need to write code which depends on a specific version, you must be more careful. Each time the minor version is increased, the patch level is reset to zero; each time the major version is increased (which happens rarely), the minor version and patch level are reset. If you wish to use the predefined macros directly in the conditional, you will need to write it like this:

          /* Test for GCC > 3.2.0 */
          #if __GNUC__ > 3 || \
              (__GNUC__ == 3 && (__GNUC_MINOR__ > 2 || \
                                 (__GNUC_MINOR__ == 2 && \
                                  __GNUC_PATCHLEVEL__ > 0))
     

Another approach is to use the predefined macros to calculate a single number, then compare that against a threshold:

          #define GCC_VERSION (__GNUC__ * 10000 \
                               + __GNUC_MINOR__ * 100 \
                               + __GNUC_PATCHLEVEL__)
          ...
          /* Test for GCC > 3.2.0 */
          #if GCC_VERSION > 30200
     

Many people find this form easier to understand.

__GNUG__
The GNU C++ compiler defines this. Testing it is equivalent to testing (__GNUC__ && __cplusplus).
__STRICT_ANSI__
GCC defines this macro if and only if the -ansi switch, or a -std switch specifying strict conformance to some version of ISO C, was specified when GCC was invoked. It is defined to `1'. This macro exists primarily to direct GNU libc's header files to restrict their definitions to the minimal set found in the 1989 C standard.
__BASE_FILE__
This macro expands to the name of the main input file, in the form of a C string constant. This is the source file that was specified on the command line of the preprocessor or C compiler.
__INCLUDE_LEVEL__
This macro expands to a decimal integer constant that represents the depth of nesting in include files. The value of this macro is incremented on every `#include' directive and decremented at the end of every included file. It starts out at 0, it's value within the base file specified on the command line.
__ELF__
This macro is defined if the target uses the ELF object format.
__VERSION__
This macro expands to a string constant which describes the version of the compiler in use. You should not rely on its contents having any particular form, but it can be counted on to contain at least the release number.
__OPTIMIZE__
__OPTIMIZE_SIZE__
__NO_INLINE__
These macros describe the compilation mode. __OPTIMIZE__ is defined in all optimizing compilations. __OPTIMIZE_SIZE__ is defined if the compiler is optimizing for size, not speed. __NO_INLINE__ is defined if no functions will be inlined into their callers (when not optimizing, or when inlining has been specifically disabled by -fno-inline).

These macros cause certain GNU header files to provide optimized definitions, using macros or inline functions, of system library functions. You should not use these macros in any way unless you make sure that programs will execute with the same effect whether or not they are defined. If they are defined, their value is 1.

__CHAR_UNSIGNED__
GCC defines this macro if and only if the data type char is unsigned on the target machine. It exists to cause the standard header file limits.h to work correctly. You should not use this macro yourself; instead, refer to the standard macros defined in limits.h.
__WCHAR_UNSIGNED__
Like __CHAR_UNSIGNED__, this macro is defined if and only if the data type wchar_t is unsigned and the front-end is in C++ mode.
__REGISTER_PREFIX__
This macro expands to a single token (not a string constant) which is the prefix applied to CPU register names in assembly language for this target. You can use it to write assembly that is usable in multiple environments. For example, in the m68k-aout environment it expands to nothing, but in the m68k-coff environment it expands to a single `%'.
__USER_LABEL_PREFIX__
This macro expands to a single token which is the prefix applied to user labels (symbols visible to C code) in assembly. For example, in the m68k-aout environment it expands to an `_', but in the m68k-coff environment it expands to nothing.

This macro will have the correct definition even if -f(no-)underscores is in use, but it will not be correct if target-specific options that adjust this prefix are used (e.g. the OSF/rose -mno-underscores option).

__SIZE_TYPE__
__PTRDIFF_TYPE__
__WCHAR_TYPE__
__WINT_TYPE__
These macros are defined to the correct underlying types for the size_t, ptrdiff_t, wchar_t, and wint_t typedefs, respectively. They exist to make the standard header files stddef.h and wchar.h work correctly. You should not use these macros directly; instead, include the appropriate headers and use the typedefs.
__CHAR_BIT__
Defined to the number of bits used in the representation of the char data type. It exists to make the standard header given numerical limits work correctly. You should not use this macro directly; instead, include the appropriate headers.
__SCHAR_MAX__
__WCHAR_MAX__
__SHRT_MAX__
__INT_MAX__
__LONG_MAX__
__LONG_LONG_MAX__
Defined to the maximum value of the signed char, wchar_t, signed short, signed int, signed long, and signed long long types respectively. They exist to make the standard header given numerical limits work correctly. You should not use these macros directly; instead, include the appropriate headers.
__USING_SJLJ_EXCEPTIONS__
This macro is defined, with value 1, if the compiler uses the old mechanism based on setjmp and longjmp for exception handling.
__NEXT_RUNTIME__
This macro is defined, with value 1, if (and only if) the NeXT runtime (as in -fnext-runtime) is in use for Objective-C. If the GNU runtime is used, this macro is not defined, so that you can use this macro to determine which runtime (NeXT or GNU) is being used.
__LP64__
_LP64
These macros are defined, with value 1, if (and only if) the compilation is for a target where long int and pointer both use 64-bits and int uses 32-bit.


Next: , Previous: Common Predefined Macros, Up: Predefined Macros

3.7.3 System-specific Predefined Macros

The C preprocessor normally predefines several macros that indicate what type of system and machine is in use. They are obviously different on each target supported by GCC. This manual, being for all systems and machines, cannot tell you what their names are, but you can use cpp -dM to see them all. See Invocation. All system-specific predefined macros expand to the constant 1, so you can test them with either `#ifdef' or `#if'.

The C standard requires that all system-specific macros be part of the reserved namespace. All names which begin with two underscores, or an underscore and a capital letter, are reserved for the compiler and library to use as they wish. However, historically system-specific macros have had names with no special prefix; for instance, it is common to find unix defined on Unix systems. For all such macros, GCC provides a parallel macro with two underscores added at the beginning and the end. If unix is defined, __unix__ will be defined too. There will never be more than two underscores; the parallel of _mips is __mips__.

When the -ansi option, or any -std option that requests strict conformance, is given to the compiler, all the system-specific predefined macros outside the reserved namespace are suppressed. The parallel macros, inside the reserved namespace, remain defined.

We are slowly phasing out all predefined macros which are outside the reserved namespace. You should never use them in new programs, and we encourage you to correct older code to use the parallel macros whenever you find it. We don't recommend you use the system-specific macros that are in the reserved namespace, either. It is better in the long run to check specifically for features you need, using a tool such as autoconf.


Previous: System-specific Predefined Macros, Up: Predefined Macros

3.7.4 C++ Named Operators

In C++, there are eleven keywords which are simply alternate spellings of operators normally written with punctuation. These keywords are treated as such even in the preprocessor. They function as operators in `#if', and they cannot be defined as macros or poisoned. In C, you can request that those keywords take their C++ meaning by including iso646.h. That header defines each one as a normal object-like macro expanding to the appropriate punctuator.

These are the named operators and their corresponding punctuators:

Named Operator Punctuator
and &&
and_eq &=
bitand &
bitor |
compl ~
not !
not_eq !=
or ||
or_eq |=
xor ^
xor_eq ^=


Next: , Previous: Predefined Macros, Up: Macros

3.8 Undefining and Redefining Macros

If a macro ceases to be useful, it may be undefined with the `#undef' directive. `#undef' takes a single argument, the name of the macro to undefine. You use the bare macro name, even if the macro is function-like. It is an error if anything appears on the line after the macro name. `#undef' has no effect if the name is not a macro.

     #define FOO 4
     x = FOO;        ==> x = 4;
     #undef FOO
     x = FOO;        ==> x = FOO;

Once a macro has been undefined, that identifier may be redefined as a macro by a subsequent `#define' directive. The new definition need not have any resemblance to the old definition.

However, if an identifier which is currently a macro is redefined, then the new definition must be effectively the same as the old one. Two macro definitions are effectively the same if:

These definitions are effectively the same:

     #define FOUR (2 + 2)
     #define FOUR         (2    +    2)
     #define FOUR (2 /* two */ + 2)

but these are not:

     #define FOUR (2 + 2)
     #define FOUR ( 2+2 )
     #define FOUR (2 * 2)
     #define FOUR(score,and,seven,years,ago) (2 + 2)

If a macro is redefined with a definition that is not effectively the same as the old one, the preprocessor issues a warning and changes the macro to use the new definition. If the new definition is effectively the same, the redefinition is silently ignored. This allows, for instance, two different headers to define a common macro. The preprocessor will only complain if the definitions do not match.


Next: , Previous: Undefining and Redefining Macros, Up: Macros

3.9 Directives Within Macro Arguments

Occasionally it is convenient to use preprocessor directives within the arguments of a macro. The C and C++ standards declare that behavior in these cases is undefined.

Versions of CPP prior to 3.2 would reject such constructs with an error message. This was the only syntactic difference between normal functions and function-like macros, so it seemed attractive to remove this limitation, and people would often be surprised that they could not use macros in this way. Moreover, sometimes people would use conditional compilation in the argument list to a normal library function like `printf', only to find that after a library upgrade `printf' had changed to be a function-like macro, and their code would no longer compile. So from version 3.2 we changed CPP to successfully process arbitrary directives within macro arguments in exactly the same way as it would have processed the directive were the function-like macro invocation not present.

If, within a macro invocation, that macro is redefined, then the new definition takes effect in time for argument pre-expansion, but the original definition is still used for argument replacement. Here is a pathological example:

     #define f(x) x x
     f (1
     #undef f
     #define f 2
     f)

which expands to

     1 2 1 2

with the semantics described above.


Previous: Directives Within Macro Arguments, Up: Macros

3.10 Macro Pitfalls

In this section we describe some special rules that apply to macros and macro expansion, and point out certain cases in which the rules have counter-intuitive consequences that you must watch out for.


Next: , Up: Macro Pitfalls

3.10.1 Misnesting

When a macro is called with arguments, the arguments are substituted into the macro body and the result is checked, together with the rest of the input file, for more macro calls. It is possible to piece together a macro call coming partially from the macro body and partially from the arguments. For example,

     #define twice(x) (2*(x))
     #define call_with_1(x) x(1)
     call_with_1 (twice)
          ==> twice(1)
          ==> (2*(1))

Macro definitions do not have to have balanced parentheses. By writing an unbalanced open parenthesis in a macro body, it is possible to create a macro call that begins inside the macro body but ends outside of it. For example,

     #define strange(file) fprintf (file, "%s %d",
     ...
     strange(stderr) p, 35)
          ==> fprintf (stderr, "%s %d", p, 35)

The ability to piece together a macro call can be useful, but the use of unbalanced open parentheses in a macro body is just confusing, and should be avoided.


Next: , Previous: Misnesting, Up: Macro Pitfalls

3.10.2 Operator Precedence Problems

You may have noticed that in most of the macro definition examples shown above, each occurrence of a macro argument name had parentheses around it. In addition, another pair of parentheses usually surround the entire macro definition. Here is why it is best to write macros that way.

Suppose you define a macro as follows,

     #define ceil_div(x, y) (x + y - 1) / y

whose purpose is to divide, rounding up. (One use for this operation is to compute how many int objects are needed to hold a certain number of char objects.) Then suppose it is used as follows:

     a = ceil_div (b & c, sizeof (int));
          ==> a = (b & c + sizeof (int) - 1) / sizeof (int);

This does not do what is intended. The operator-precedence rules of C make it equivalent to this:

     a = (b & (c + sizeof (int) - 1)) / sizeof (int);

What we want is this:

     a = ((b & c) + sizeof (int) - 1)) / sizeof (int);

Defining the macro as

     #define ceil_div(x, y) ((x) + (y) - 1) / (y)

provides the desired result.

Unintended grouping can result in another way. Consider sizeof ceil_div(1, 2). That has the appearance of a C expression that would compute the size of the type of ceil_div (1, 2), but in fact it means something very different. Here is what it expands to:

     sizeof ((1) + (2) - 1) / (2)

This would take the size of an integer and divide it by two. The precedence rules have put the division outside the sizeof when it was intended to be inside.

Parentheses around the entire macro definition prevent such problems. Here, then, is the recommended way to define ceil_div:

     #define ceil_div(x, y) (((x) + (y) - 1) / (y))


Next: , Previous: Operator Precedence Problems, Up: Macro Pitfalls

3.10.3 Swallowing the Semicolon

Often it is desirable to define a macro that expands into a compound statement. Consider, for example, the following macro, that advances a pointer (the argument p says where to find it) across whitespace characters:

     #define SKIP_SPACES(p, limit)  \
     { char *lim = (limit);         \
       while (p < lim) {            \
         if (*p++ != ' ') {         \
           p--; break; }}}

Here backslash-newline is used to split the macro definition, which must be a single logical line, so that it resembles the way such code would be laid out if not part of a macro definition.

A call to this macro might be SKIP_SPACES (p, lim). Strictly speaking, the call expands to a compound statement, which is a complete statement with no need for a semicolon to end it. However, since it looks like a function call, it minimizes confusion if you can use it like a function call, writing a semicolon afterward, as in SKIP_SPACES (p, lim);

This can cause trouble before else statements, because the semicolon is actually a null statement. Suppose you write

     if (*p != 0)
       SKIP_SPACES (p, lim);
     else ...

The presence of two statements—the compound statement and a null statement—in between the if condition and the else makes invalid C code.

The definition of the macro SKIP_SPACES can be altered to solve this problem, using a do ... while statement. Here is how:

     #define SKIP_SPACES(p, limit)     \
     do { char *lim = (limit);         \
          while (p < lim) {            \
            if (*p++ != ' ') {         \
              p--; break; }}}          \
     while (0)

Now SKIP_SPACES (p, lim); expands into

     do {...} while (0);

which is one statement. The loop executes exactly once; most compilers generate no extra code for it.


Next: , Previous: Swallowing the Semicolon, Up: Macro Pitfalls

3.10.4 Duplication of Side Effects

Many C programs define a macro min, for “minimum”, like this:

     #define min(X, Y)  ((X) < (Y) ? (X) : (Y))

When you use this macro with an argument containing a side effect, as shown here,

     next = min (x + y, foo (z));

it expands as follows:

     next = ((x + y) < (foo (z)) ? (x + y) : (foo (z)));

where x + y has been substituted for X and foo (z) for Y.

The function foo is used only once in the statement as it appears in the program, but the expression foo (z) has been substituted twice into the macro expansion. As a result, foo might be called two times when the statement is executed. If it has side effects or if it takes a long time to compute, the results might not be what you intended. We say that min is an unsafe macro.

The best solution to this problem is to define min in a way that computes the value of foo (z) only once. The C language offers no standard way to do this, but it can be done with GNU extensions as follows:

     #define min(X, Y)                \
     ({ typeof (X) x_ = (X);          \
        typeof (Y) y_ = (Y);          \
        (x_ < y_) ? x_ : y_; })

The `({ ... })' notation produces a compound statement that acts as an expression. Its value is the value of its last statement. This permits us to define local variables and assign each argument to one. The local variables have underscores after their names to reduce the risk of conflict with an identifier of wider scope (it is impossible to avoid this entirely). Now each argument is evaluated exactly once.

If you do not wish to use GNU C extensions, the only solution is to be careful when using the macro min. For example, you can calculate the value of foo (z), save it in a variable, and use that variable in min:

     #define min(X, Y)  ((X) < (Y) ? (X) : (Y))
     ...
     {
       int tem = foo (z);
       next = min (x + y, tem);
     }

(where we assume that foo returns type int).


Next: , Previous: Duplication of Side Effects, Up: Macro Pitfalls

3.10.5 Self-Referential Macros

A self-referential macro is one whose name appears in its definition. Recall that all macro definitions are rescanned for more macros to replace. If the self-reference were considered a use of the macro, it would produce an infinitely large expansion. To prevent this, the self-reference is not considered a macro call. It is passed into the preprocessor output unchanged. Consider an example:

     #define foo (4 + foo)

where foo is also a variable in your program.

Following the ordinary rules, each reference to foo will expand into (4 + foo); then this will be rescanned and will expand into (4 + (4 + foo)); and so on until the computer runs out of memory.

The self-reference rule cuts this process short after one step, at (4 + foo). Therefore, this macro definition has the possibly useful effect of causing the program to add 4 to the value of foo wherever foo is referred to.

In most cases, it is a bad idea to take advantage of this feature. A person reading the program who sees that foo is a variable will not expect that it is a macro as well. The reader will come across the identifier foo in the program and think its value should be that of the variable foo, whereas in fact the value is four greater.

One common, useful use of self-reference is to create a macro which expands to itself. If you write

     #define EPERM EPERM

then the macro EPERM expands to EPERM. Effectively, it is left alone by the preprocessor whenever it's used in running text. You can tell that it's a macro with `#ifdef'. You might do this if you want to define numeric constants with an enum, but have `#ifdef' be true for each constant.

If a macro x expands to use a macro y, and the expansion of y refers to the macro x, that is an indirect self-reference of x. x is not expanded in this case either. Thus, if we have

     #define x (4 + y)
     #define y (2 * x)

then x and y expand as follows:

     x    ==> (4 + y)
          ==> (4 + (2 * x))
     
     y    ==> (2 * x)
          ==> (2 * (4 + y))

Each macro is expanded when it appears in the definition of the other macro, but not when it indirectly appears in its own definition.


Next: , Previous: Self-Referential Macros, Up: Macro Pitfalls

3.10.6 Argument Prescan

Macro arguments are completely macro-expanded before they are substituted into a macro body, unless they are stringified or pasted with other tokens. After substitution, the entire macro body, including the substituted arguments, is scanned again for macros to be expanded. The result is that the arguments are scanned twice to expand macro calls in them.

Most of the time, this has no effect. If the argument contained any macro calls, they are expanded during the first scan. The result therefore contains no macro calls, so the second scan does not change it. If the argument were substituted as given, with no prescan, the single remaining scan would find the same macro calls and produce the same results.

You might expect the double scan to change the results when a self-referential macro is used in an argument of another macro (see Self-Referential Macros): the self-referential macro would be expanded once in the first scan, and a second time in the second scan. However, this is not what happens. The self-references that do not expand in the first scan are marked so that they will not expand in the second scan either.

You might wonder, “Why mention the prescan, if it makes no difference? And why not skip it and make the preprocessor faster?” The answer is that the prescan does make a difference in three special cases:


Previous: Argument Prescan, Up: Macro Pitfalls

3.10.7 Newlines in Arguments

The invocation of a function-like macro can extend over many logical lines. However, in the present implementation, the entire expansion comes out on one line. Thus line numbers emitted by the compiler or debugger refer to the line the invocation started on, which might be different to the line containing the argument causing the problem.

Here is an example illustrating this:

     #define ignore_second_arg(a,b,c) a; c
     
     ignore_second_arg (foo (),
                        ignored (),
                        syntax error);

The syntax error triggered by the tokens syntax error results in an error message citing line three—the line of ignore_second_arg— even though the problematic code comes from line five.

We consider this a bug, and intend to fix it in the near future.


Next: , Previous: Macros, Up: Top

4 Conditionals

A conditional is a directive that instructs the preprocessor to select whether or not to include a chunk of code in the final token stream passed to the compiler. Preprocessor conditionals can test arithmetic expressions, or whether a name is defined as a macro, or both simultaneously using the special defined operator.

A conditional in the C preprocessor resembles in some ways an if statement in C, but it is important to understand the difference between them. The condition in an if statement is tested during the execution of your program. Its purpose is to allow your program to behave differently from run to run, depending on the data it is operating on. The condition in a preprocessing conditional directive is tested when your program is compiled. Its purpose is to allow different code to be included in the program depending on the situation at the time of compilation.

However, the distinction is becoming less clear. Modern compilers often do test if statements when a program is compiled, if their conditions are known not to vary at run time, and eliminate code which can never be executed. If you can count on your compiler to do this, you may find that your program is more readable if you use if statements with constant conditions (perhaps determined by macros). Of course, you can only use this to exclude code, not type definitions or other preprocessing directives, and you can only do it if the code remains syntactically valid when it is not to be used.

GCC version 3 eliminates this kind of never-executed code even when not optimizing. Older versions did it only when optimizing.


Next: , Up: Conditionals

4.1 Conditional Uses

There are three general reasons to use a conditional.

Simple programs that do not need system-specific logic or complex debugging hooks generally will not need to use preprocessing conditionals.


Next: , Previous: Conditional Uses, Up: Conditionals

4.2 Conditional Syntax

A conditional in the C preprocessor begins with a conditional directive: `#if', `#ifdef' or `#ifndef'.


Next: , Up: Conditional Syntax

4.2.1 Ifdef

The simplest sort of conditional is

     #ifdef MACRO
     
     controlled text
     
     #endif /* MACRO */

This block is called a conditional group. controlled text will be included in the output of the preprocessor if and only if MACRO is defined. We say that the conditional succeeds if MACRO is defined, fails if it is not.

The controlled text inside of a conditional can include preprocessing directives. They are executed only if the conditional succeeds. You can nest conditional groups inside other conditional groups, but they must be completely nested. In other words, `#endif' always matches the nearest `#ifdef' (or `#ifndef', or `#if'). Also, you cannot start a conditional group in one file and end it in another.

Even if a conditional fails, the controlled text inside it is still run through initial transformations and tokenization. Therefore, it must all be lexically valid C. Normally the only way this matters is that all comments and string literals inside a failing conditional group must still be properly ended.

The comment following the `#endif' is not required, but it is a good practice if there is a lot of controlled text, because it helps people match the `#endif' to the corresponding `#ifdef'. Older programs sometimes put MACRO directly after the `#endif' without enclosing it in a comment. This is invalid code according to the C standard. CPP accepts it with a warning. It never affects which `#ifndef' the `#endif' matches.

Sometimes you wish to use some code if a macro is not defined. You can do this by writing `#ifndef' instead of `#ifdef'. One common use of `#ifndef' is to include code only the first time a header file is included. See Once-Only Headers.

Macro definitions can vary between compilations for several reasons. Here are some samples.


Next: , Previous: Ifdef, Up: Conditional Syntax

4.2.2 If

The `#if' directive allows you to test the value of an arithmetic expression, rather than the mere existence of one macro. Its syntax is

     #if expression
     
     controlled text
     
     #endif /* expression */

expression is a C expression of integer type, subject to stringent restrictions. It may contain

The preprocessor does not know anything about types in the language. Therefore, sizeof operators are not recognized in `#if', and neither are enum constants. They will be taken as identifiers which are not macros, and replaced by zero. In the case of sizeof, this is likely to cause the expression to be invalid.

The preprocessor calculates the value of expression. It carries out all calculations in the widest integer type known to the compiler; on most machines supported by GCC this is 64 bits. This is not the same rule as the compiler uses to calculate the value of a constant expression, and may give different results in some cases. If the value comes out to be nonzero, the `#if' succeeds and the controlled text is included; otherwise it is skipped.


Next: , Previous: If, Up: Conditional Syntax

4.2.3 Defined

The special operator defined is used in `#if' and `#elif' expressions to test whether a certain name is defined as a macro. defined name and defined (name) are both expressions whose value is 1 if name is defined as a macro at the current point in the program, and 0 otherwise. Thus, #if defined MACRO is precisely equivalent to #ifdef MACRO.

defined is useful when you wish to test more than one macro for existence at once. For example,

     #if defined (__vax__) || defined (__ns16000__)

would succeed if either of the names __vax__ or __ns16000__ is defined as a macro.

Conditionals written like this:

     #if defined BUFSIZE && BUFSIZE >= 1024

can generally be simplified to just #if BUFSIZE >= 1024, since if BUFSIZE is not defined, it will be interpreted as having the value zero.

If the defined operator appears as a result of a macro expansion, the C standard says the behavior is undefined. GNU cpp treats it as a genuine defined operator and evaluates it normally. It will warn wherever your code uses this feature if you use the command-line option -pedantic, since other compilers may handle it differently.


Next: , Previous: Defined, Up: Conditional Syntax

4.2.4 Else

The `#else' directive can be added to a conditional to provide alternative text to be used if the condition fails. This is what it looks like:

     #if expression
     text-if-true
     #else /* Not expression */
     text-if-false
     #endif /* Not expression */

If expression is nonzero, the text-if-true is included and the text-if-false is skipped. If expression is zero, the opposite happens.

You can use `#else' with `#ifdef' and `#ifndef', too.


Previous: Else, Up: Conditional Syntax

4.2.5 Elif

One common case of nested conditionals is used to check for more than two possible alternatives. For example, you might have

     #if X == 1
     ...
     #else /* X != 1 */
     #if X == 2
     ...
     #else /* X != 2 */
     ...
     #endif /* X != 2 */
     #endif /* X != 1 */

Another conditional directive, `#elif', allows this to be abbreviated as follows:

     #if X == 1
     ...
     #elif X == 2
     ...
     #else /* X != 2 and X != 1*/
     ...
     #endif /* X != 2 and X != 1*/

`#elif' stands for “else if”. Like `#else', it goes in the middle of a conditional group and subdivides it; it does not require a matching `#endif' of its own. Like `#if', the `#elif' directive includes an expression to be tested. The text following the `#elif' is processed only if the original `#if'-condition failed and the `#elif' condition succeeds.

More than one `#elif' can go in the same conditional group. Then the text after each `#elif' is processed only if the `#elif' condition succeeds after the original `#if' and all previous `#elif' directives within it have failed.

`#else' is allowed after any number of `#elif' directives, but `#elif' may not follow `#else'.


Previous: Conditional Syntax, Up: Conditionals

4.3 Deleted Code

If you replace or delete a part of the program but want to keep the old code around for future reference, you often cannot simply comment it out. Block comments do not nest, so the first comment inside the old code will end the commenting-out. The probable result is a flood of syntax errors.

One way to avoid this problem is to use an always-false conditional instead. For instance, put #if 0 before the deleted code and #endif after it. This works even if the code being turned off contains conditionals, but they must be entire conditionals (balanced `#if' and `#endif').

Some people use #ifdef notdef instead. This is risky, because notdef might be accidentally defined as a macro, and then the conditional would succeed. #if 0 can be counted on to fail.

Do not use #if 0 for comments which are not C code. Use a real comment, instead. The interior of #if 0 must consist of complete tokens; in particular, single-quote characters must balance. Comments often contain unbalanced single-quote characters (known in English as apostrophes). These confuse #if 0. They don't confuse `/*'.


Next: , Previous: Conditionals, Up: Top

5 Diagnostics

The directive `#error' causes the preprocessor to report a fatal error. The tokens forming the rest of the line following `#error' are used as the error message.

You would use `#error' inside of a conditional that detects a combination of parameters which you know the program does not properly support. For example, if you know that the program will not run properly on a VAX, you might write

     #ifdef __vax__
     #error "Won't work on VAXen.  See comments at get_last_object."
     #endif

If you have several configuration parameters that must be set up by the installation in a consistent way, you can use conditionals to detect an inconsistency and report it with `#error'. For example,

     #if !defined(UNALIGNED_INT_ASM_OP) && defined(DWARF2_DEBUGGING_INFO)
     #error "DWARF2_DEBUGGING_INFO requires UNALIGNED_INT_ASM_OP."
     #endif

The directive `#warning' is like `#error', but causes the preprocessor to issue a warning and continue preprocessing. The tokens following `#warning' are used as the warning message.

You might use `#warning' in obsolete header files, with a message directing the user to the header file which should be used instead.

Neither `#error' nor `#warning' macro-expands its argument. Internal whitespace sequences are each replaced with a single space. The line must consist of complete tokens. It is wisest to make the argument of these directives be a single string constant; this avoids problems with apostrophes and the like.


Next: , Previous: Diagnostics, Up: Top

6 Line Control

The C preprocessor informs the C compiler of the location in your source code where each token came from. Presently, this is just the file name and line number. All the tokens resulting from macro expansion are reported as having appeared on the line of the source file where the outermost macro was used. We intend to be more accurate in the future.

If you write a program which generates source code, such as the bison parser generator, you may want to adjust the preprocessor's notion of the current file name and line number by hand. Parts of the output from bison are generated from scratch, other parts come from a standard parser file. The rest are copied verbatim from bison's input. You would like compiler error messages and symbolic debuggers to be able to refer to bison's input file.

bison or any such program can arrange this by writing `#line' directives into the output file. `#line' is a directive that specifies the original line number and source file name for subsequent input in the current preprocessor input file. `#line' has three variants:

#line linenum
linenum is a non-negative decimal integer constant. It specifies the line number which should be reported for the following line of input. Subsequent lines are counted from linenum.
#line linenum filename
linenum is the same as for the first form, and has the same effect. In addition, filename is a string constant. The following line and all subsequent lines are reported to come from the file it specifies, until something else happens to change that. filename is interpreted according to the normal rules for a string constant: backslash escapes are interpreted. This is different from `#include'.

Previous versions of CPP did not interpret escapes in `#line'; we have changed it because the standard requires they be interpreted, and most other compilers do.

#line anything else
anything else is checked for macro calls, which are expanded. The result should match one of the above two forms.

`#line' directives alter the results of the __FILE__ and __LINE__ predefined macros from that point on. See Standard Predefined Macros. They do not have any effect on `#include''s idea of the directory containing the current file. This is a change from GCC 2.95. Previously, a file reading

     #line 1 "../src/gram.y"
     #include "gram.h"

would search for gram.h in ../src, then the -I chain; the directory containing the physical source file would not be searched. In GCC 3.0 and later, the `#include' is not affected by the presence of a `#line' referring to a different directory.

We made this change because the old behavior caused problems when generated source files were transported between machines. For instance, it is common practice to ship generated parsers with a source release, so that people building the distribution do not need to have yacc or Bison installed. These files frequently have `#line' directives referring to the directory tree of the system where the distribution was created. If GCC tries to search for headers in those directories, the build is likely to fail.

The new behavior can cause failures too, if the generated file is not in the same directory as its source and it attempts to include a header which would be visible searching from the directory containing the source file. However, this problem is easily solved with an additional -I switch on the command line. The failures caused by the old semantics could sometimes be corrected only by editing the generated files, which is difficult and error-prone.


Next: , Previous: Line Control, Up: Top

7 Pragmas

The `#pragma' directive is the method specified by the C standard for providing additional information to the compiler, beyond what is conveyed in the language itself. Three forms of this directive (commonly known as pragmas) are specified by the 1999 C standard. A C compiler is free to attach any meaning it likes to other pragmas.

GCC has historically preferred to use extensions to the syntax of the language, such as __attribute__, for this purpose. However, GCC does define a few pragmas of its own. These mostly have effects on the entire translation unit or source file.

In GCC version 3, all GNU-defined, supported pragmas have been given a GCC prefix. This is in line with the STDC prefix on all pragmas defined by C99. For backward compatibility, pragmas which were recognized by previous versions are still recognized without the GCC prefix, but that usage is deprecated. Some older pragmas are deprecated in their entirety. They are not recognized with the GCC prefix. See Obsolete Features.

C99 introduces the _Pragma operator. This feature addresses a major problem with `#pragma': being a directive, it cannot be produced as the result of macro expansion. _Pragma is an operator, much like sizeof or defined, and can be embedded in a macro.

Its syntax is _Pragma (string-literal), where string-literal can be either a normal or wide-character string literal. It is destringized, by replacing all `\\' with a single `\' and all `\"' with a `"'. The result is then processed as if it had appeared as the right hand side of a `#pragma' directive. For example,

     _Pragma ("GCC dependency \"parse.y\"")

has the same effect as #pragma GCC dependency "parse.y". The same effect could be achieved using macros, for example

     #define DO_PRAGMA(x) _Pragma (#x)
     DO_PRAGMA (GCC dependency "parse.y")

The standard is unclear on where a _Pragma operator can appear. The preprocessor does not accept it within a preprocessing conditional directive like `#if'. To be safe, you are probably best keeping it out of directives other than `#define', and putting it on a line of its own.

This manual documents the pragmas which are meaningful to the preprocessor itself. Other pragmas are meaningful to the C or C++ compilers. They are documented in the GCC manual.

#pragma GCC dependency
#pragma GCC dependency allows you to check the relative dates of the current file and another file. If the other file is more recent than the current file, a warning is issued. This is useful if the current file is derived from the other file, and should be regenerated. The other file is searched for using the normal include search path. Optional trailing text can be used to give more information in the warning message.
          #pragma GCC dependency "parse.y"
          #pragma GCC dependency "/usr/include/time.h" rerun fixincludes
     

#pragma GCC poison
Sometimes, there is an identifier that you want to remove completely from your program, and make sure that it never creeps back in. To enforce this, you can poison the identifier with this pragma. #pragma GCC poison is followed by a list of identifiers to poison. If any of those identifiers appears anywhere in the source after the directive, it is a hard error. For example,
          #pragma GCC poison printf sprintf fprintf
          sprintf(some_string, "hello");
     

will produce an error.

If a poisoned identifier appears as part of the expansion of a macro which was defined before the identifier was poisoned, it will not cause an error. This lets you poison an identifier without worrying about system headers defining macros that use it.

For example,

          #define strrchr rindex
          #pragma GCC poison rindex
          strrchr(some_string, 'h');
     

will not produce an error.

#pragma GCC system_header
This pragma takes no arguments. It causes the rest of the code in the current file to be treated as if it came from a system header. See System Headers.


Next: , Previous: Pragmas, Up: Top

8 Other Directives

The `#ident' directive takes one argument, a string constant. On some systems, that string constant is copied into a special segment of the object file. On other systems, the directive is ignored.

This directive is not part of the C standard, but it is not an official GNU extension either. We believe it came from System V.

The `#sccs' directive is recognized, because it appears in the header files of some systems. It is a very old, obscure, extension which we did not invent, and we have been unable to find any documentation of what it should do, so GCC simply ignores it.

The null directive consists of a `#' followed by a newline, with only whitespace (including comments) in between. A null directive is understood as a preprocessing directive but has no effect on the preprocessor output. The primary significance of the existence of the null directive is that an input line consisting of just a `#' will produce no output, rather than a line of output containing just a `#'. Supposedly some old C programs contain such lines.


Next: , Previous: Other Directives, Up: Top

9 Preprocessor Output

When the C preprocessor is used with the C, C++, or Objective-C compilers, it is integrated into the compiler and communicates a stream of binary tokens directly to the compiler's parser. However, it can also be used in the more conventional standalone mode, where it produces textual output.

The output from the C preprocessor looks much like the input, except that all preprocessing directive lines have been replaced with blank lines and all comments with spaces. Long runs of blank lines are discarded.

The ISO standard specifies that it is implementation defined whether a preprocessor preserves whitespace between tokens, or replaces it with e.g. a single space. In GNU CPP, whitespace between tokens is collapsed to become a single space, with the exception that the first token on a non-directive line is preceded with sufficient spaces that it appears in the same column in the preprocessed output that it appeared in the original source file. This is so the output is easy to read. See Differences from previous versions. CPP does not insert any whitespace where there was none in the original source, except where necessary to prevent an accidental token paste.

Source file name and line number information is conveyed by lines of the form

     # linenum filename flags

These are called linemarkers. They are inserted as needed into the output (but never within a string or character constant). They mean that the following line originated in file filename at line linenum. filename will never contain any non-printing characters; they are replaced with octal escape sequences.

After the file name comes zero or more flags, which are `1', `2', `3', or `4'. If there are multiple flags, spaces separate them. Here is what the flags mean:

`1'
This indicates the start of a new file.
`2'
This indicates returning to a file (after having included another file).
`3'
This indicates that the following text comes from a system header file, so certain warnings should be suppressed.
`4'
This indicates that the following text should be treated as being wrapped in an implicit extern "C" block.

As an extension, the preprocessor accepts linemarkers in non-assembler input files. They are treated like the corresponding `#line' directive, (see Line Control), except that trailing flags are permitted, and are interpreted with the meanings described above. If multiple flags are given, they must be in ascending order.

Some directives may be duplicated in the output of the preprocessor. These are `#ident' (always), `#pragma' (only if the preprocessor does not handle the pragma itself), and `#define' and `#undef' (with certain debugging options). If this happens, the `#' of the directive will always be in the first column, and there will be no space between the `#' and the directive name. If macro expansion happens to generate tokens which might be mistaken for a duplicated directive, a space will be inserted between the `#' and the directive name.


Next: , Previous: Preprocessor Output, Up: Top

10 Traditional Mode

Traditional (pre-standard) C preprocessing is rather different from the preprocessing specified by the standard. When GCC is given the -traditional-cpp option, it attempts to emulate a traditional preprocessor.

GCC versions 3.2 and later only support traditional mode semantics in the preprocessor, and not in the compiler front ends. This chapter outlines the traditional preprocessor semantics we implemented.

The implementation does not correspond precisely to the behavior of earlier versions of GCC, nor to any true traditional preprocessor. After all, inconsistencies among traditional implementations were a major motivation for C standardization. However, we intend that it should be compatible with true traditional preprocessors in all ways that actually matter.


Next: , Up: Traditional Mode

10.1 Traditional lexical analysis

The traditional preprocessor does not decompose its input into tokens the same way a standards-conforming preprocessor does. The input is simply treated as a stream of text with minimal internal form.

This implementation does not treat trigraphs (see trigraphs) specially since they were an invention of the standards committee. It handles arbitrarily-positioned escaped newlines properly and splices the lines as you would expect; many traditional preprocessors did not do this.

The form of horizontal whitespace in the input file is preserved in the output. In particular, hard tabs remain hard tabs. This can be useful if, for example, you are preprocessing a Makefile.

Traditional CPP only recognizes C-style block comments, and treats the `/*' sequence as introducing a comment only if it lies outside quoted text. Quoted text is introduced by the usual single and double quotes, and also by an initial `<' in a #include directive.

Traditionally, comments are completely removed and are not replaced with a space. Since a traditional compiler does its own tokenization of the output of the preprocessor, this means that comments can effectively be used as token paste operators. However, comments behave like separators for text handled by the preprocessor itself, since it doesn't re-lex its input. For example, in

     #if foo/**/bar

`foo' and `bar' are distinct identifiers and expanded separately if they happen to be macros. In other words, this directive is equivalent to

     #if foo bar

rather than

     #if foobar

Generally speaking, in traditional mode an opening quote need not have a matching closing quote. In particular, a macro may be defined with replacement text that contains an unmatched quote. Of course, if you attempt to compile preprocessed output containing an unmatched quote you will get a syntax error.

However, all preprocessing directives other than #define require matching quotes. For example:

     #define m This macro's fine and has an unmatched quote
     "/* This is not a comment.  */
     /* This is a comment.  The following #include directive
        is ill-formed.  */
     #include <stdio.h

Just as for the ISO preprocessor, what would be a closing quote can be escaped with a backslash to prevent the quoted text from closing.


Next: , Previous: Traditional lexical analysis, Up: Traditional Mode

10.2 Traditional macros

The major difference between traditional and ISO macros is that the former expand to text rather than to a token sequence. CPP removes all leading and trailing horizontal whitespace from a macro's replacement text before storing it, but preserves the form of internal whitespace.

One consequence is that it is legitimate for the replacement text to contain an unmatched quote (see Traditional lexical analysis). An unclosed string or character constant continues into the text following the macro call. Similarly, the text at the end of a macro's expansion can run together with the text after the macro invocation to produce a single token.

Normally comments are removed from the replacement text after the macro is expanded, but if the -CC option is passed on the command line comments are preserved. (In fact, the current implementation removes comments even before saving the macro replacement text, but it careful to do it in such a way that the observed effect is identical even in the function-like macro case.)

The ISO stringification operator `#' and token paste operator `##' have no special meaning. As explained later, an effect similar to these operators can be obtained in a different way. Macro names that are embedded in quotes, either from the main file or after macro replacement, do not expand.

CPP replaces an unquoted object-like macro name with its replacement text, and then rescans it for further macros to replace. Unlike standard macro expansion, traditional macro expansion has no provision to prevent recursion. If an object-like macro appears unquoted in its replacement text, it will be replaced again during the rescan pass, and so on ad infinitum. GCC detects when it is expanding recursive macros, emits an error message, and continues after the offending macro invocation.

     #define PLUS +
     #define INC(x) PLUS+x
     INC(foo);
          ==> ++foo;

Function-like macros are similar in form but quite different in behavior to their ISO counterparts. Their arguments are contained within parentheses, are comma-separated, and can cross physical lines. Commas within nested parentheses are not treated as argument separators. Similarly, a quote in an argument cannot be left unclosed; a following comma or parenthesis that comes before the closing quote is treated like any other character. There is no facility for handling variadic macros.

This implementation removes all comments from macro arguments, unless the -C option is given. The form of all other horizontal whitespace in arguments is preserved, including leading and trailing whitespace. In particular

     f( )

is treated as an invocation of the macro `f' with a single argument consisting of a single space. If you want to invoke a function-like macro that takes no arguments, you must not leave any whitespace between the parentheses.

If a macro argument crosses a new line, the new line is replaced with a space when forming the argument. If the previous line contained an unterminated quote, the following line inherits the quoted state.

Traditional preprocessors replace parameters in the replacement text with their arguments regardless of whether the parameters are within quotes or not. This provides a way to stringize arguments. For example

     #define str(x) "x"
     str(/* A comment */some text )
          ==> "some text "

Note that the comment is removed, but that the trailing space is preserved. Here is an example of using a comment to effect token pasting.

     #define suffix(x) foo_/**/x
     suffix(bar)
          ==> foo_bar


Next: , Previous: Traditional macros, Up: Traditional Mode

10.3 Traditional miscellany

Here are some things to be aware of when using the traditional preprocessor.


Previous: Traditional miscellany, Up: Traditional Mode

10.4 Traditional warnings

You can request warnings about features that did not exist, or worked differently, in traditional C with the -Wtraditional option. GCC does not warn about features of ISO C which you must use when you are using a conforming compiler, such as the `#' and `##' operators.

Presently -Wtraditional warns about:


Next: , Previous: Traditional Mode, Up: Top

11 Implementation Details

Here we document details of how the preprocessor's implementation affects its user-visible behavior. You should try to avoid undue reliance on behavior described here, as it is possible that it will change subtly in future implementations.

Also documented here are obsolete features and changes from previous versions of CPP.


Next: , Up: Implementation Details

11.1 Implementation-defined behavior

This is how CPP behaves in all the cases which the C standard describes as implementation-defined. This term means that the implementation is free to do what it likes, but must document its choice and stick to it.


Next: , Previous: Implementation-defined behavior, Up: Implementation Details

11.2 Implementation limits

CPP has a small number of internal limits. This section lists the limits which the C standard requires to be no lower than some minimum, and all the others known. It is intended that there should be as few limits as possible. If you encounter an undocumented or inconvenient limit, please report that as a bug. See Reporting Bugs.

Where we say something is limited only by available memory, that means that internal data structures impose no intrinsic limit, and space is allocated with malloc or equivalent. The actual limit will therefore depend on many things, such as the size of other things allocated by the compiler at the same time, the amount of memory consumed by other processes on the same computer, etc.


Next: , Previous: Implementation limits, Up: Implementation Details

11.3 Obsolete Features

CPP has a number of features which are present mainly for compatibility with older programs. We discourage their use in new code. In some cases, we plan to remove the feature in a future version of GCC.


Next: , Up: Obsolete Features

11.3.1 Assertions

Assertions are a deprecated alternative to macros in writing conditionals to test what sort of computer or system the compiled program will run on. Assertions are usually predefined, but you can define them with preprocessing directives or command-line options.

Assertions were intended to provide a more systematic way to describe the compiler's target system. However, in practice they are just as unpredictable as the system-specific predefined macros. In addition, they are not part of any standard, and only a few compilers support them. Therefore, the use of assertions is less portable than the use of system-specific predefined macros. We recommend you do not use them at all.

An assertion looks like this:

     #predicate (answer)

predicate must be a single identifier. answer can be any sequence of tokens; all characters are significant except for leading and trailing whitespace, and differences in internal whitespace sequences are ignored. (This is similar to the rules governing macro redefinition.) Thus, (x + y) is different from (x+y) but equivalent to ( x + y ). Parentheses do not nest inside an answer.

To test an assertion, you write it in an `#if'. For example, this conditional succeeds if either vax or ns16000 has been asserted as an answer for machine.

     #if #machine (vax) || #machine (ns16000)

You can test whether any answer is asserted for a predicate by omitting the answer in the conditional:

     #if #machine

Assertions are made with the `#assert' directive. Its sole argument is the assertion to make, without the leading `#' that identifies assertions in conditionals.

     #assert predicate (answer)

You may make several assertions with the same predicate and different answers. Subsequent assertions do not override previous ones for the same predicate. All the answers for any given predicate are simultaneously true.

Assertions can be canceled with the `#unassert' directive. It has the same syntax as `#assert'. In that form it cancels only the answer which was specified on the `#unassert' line; other answers for that predicate remain true. You can cancel an entire predicate by leaving out the answer:

     #unassert predicate

In either form, if no such assertion has been made, `#unassert' has no effect.

You can also make or cancel assertions using command line options. See Invocation.


Previous: Assertions, Up: Obsolete Features

11.3.2 Obsolete once-only headers

CPP supports two more ways of indicating that a header file should be read only once. Neither one is as portable as a wrapper `#ifndef', and we recommend you do not use them in new programs.

In the Objective-C language, there is a variant of `#include' called `#import' which includes a file, but does so at most once. If you use `#import' instead of `#include', then you don't need the conditionals inside the header file to prevent multiple inclusion of the contents. GCC permits the use of `#import' in C and C++ as well as Objective-C. However, it is not in standard C or C++ and should therefore not be used by portable programs.

`#import' is not a well designed feature. It requires the users of a header file to know that it should only be included once. It is much better for the header file's implementor to write the file so that users don't need to know this. Using a wrapper `#ifndef' accomplishes this goal.

In the present implementation, a single use of `#import' will prevent the file from ever being read again, by either `#import' or `#include'. You should not rely on this; do not use both `#import' and `#include' to refer to the same header file.

Another way to prevent a header file from being included more than once is with the `#pragma once' directive. If `#pragma once' is seen when scanning a header file, that file will never be read again, no matter what.

`#pragma once' does not have the problems that `#import' does, but it is not recognized by all preprocessors, so you cannot rely on it in a portable program.


Previous: Obsolete Features, Up: Implementation Details

11.4 Differences from previous versions

This section details behavior which has changed from previous versions of CPP. We do not plan to change it again in the near future, but we do not promise not to, either.

The “previous versions” discussed here are 2.95 and before. The behavior of GCC 3.0 is mostly the same as the behavior of the widely used 2.96 and 2.97 development snapshots. Where there are differences, they generally represent bugs in the snapshots.


Next: , Previous: Implementation Details, Up: Top

12 Invocation

Most often when you use the C preprocessor you will not have to invoke it explicitly: the C compiler will do so automatically. However, the preprocessor is sometimes useful on its own. All the options listed here are also acceptable to the C compiler and have the same meaning, except that the C compiler has different rules for specifying the output file.

Note: Whether you use the preprocessor by way of gcc or cpp, the compiler driver is run first. This program's purpose is to translate your command into invocations of the programs that do the actual work. Their command line interfaces are similar but not identical to the documented interface, and may change without notice.

The C preprocessor expects two file names as arguments, infile and outfile. The preprocessor reads infile together with any other files it specifies with `#include'. All the output generated by the combined input files is written in outfile.

Either infile or outfile may be -, which as infile means to read from standard input and as outfile means to write to standard output. Also, if either file is omitted, it means the same as if - had been specified for that file.

Unless otherwise noted, or the option ends in `=', all options which take an argument may have that argument appear either immediately after the option, or with a space between option and argument: -Ifoo and -I foo have the same effect.

Many options have multi-letter names; therefore multiple single-letter options may not be grouped: -dM is very different from `-d -M'.

-D name
Predefine name as a macro, with definition 1.
-D name=definition
Predefine name as a macro, with definition definition. The contents of definition are tokenized and processed as if they appeared during translation phase three in a `#define' directive. In particular, the definition will be truncated by embedded newline characters.

If you are invoking the preprocessor from a shell or shell-like program you may need to use the shell's quoting syntax to protect characters such as spaces that have a meaning in the shell syntax.

If you wish to define a function-like macro on the command line, write its argument list with surrounding parentheses before the equals sign (if any). Parentheses are meaningful to most shells, so you will need to quote the option. With sh and csh, -D'name(args...)=definition' works.

-D and -U options are processed in the order they are given on the command line. All -imacros file and -include file options are processed after all -D and -U options.

-U name
Cancel any previous definition of name, either built in or provided with a -D option.
-undef
Do not predefine any system-specific or GCC-specific macros. The standard predefined macros remain defined. See Standard Predefined Macros.
-I dir
Add the directory dir to the list of directories to be searched for header files. See Search Path. Directories named by -I are searched before the standard system include directories. If the directory dir is a standard system include directory, the option is ignored to ensure that the default search order for system directories and the special treatment of system headers are not defeated (see System Headers) .
-o file
Write output to file. This is the same as specifying file as the second non-option argument to cpp. gcc has a different interpretation of a second non-option argument, so you must use -o to specify the output file.
-Wall
Turns on all optional warnings which are desirable for normal code. At present this is -Wcomment, -Wtrigraphs, -Wmultichar and a warning about integer promotion causing a change of sign in #if expressions. Note that many of the preprocessor's warnings are on by default and have no options to control them.
-Wcomment
-Wcomments
Warn whenever a comment-start sequence `/*' appears in a `/*' comment, or whenever a backslash-newline appears in a `//' comment. (Both forms have the same effect.)
-Wtrigraphs
Most trigraphs in comments cannot affect the meaning of the program. However, a trigraph that would form an escaped newline (`??/' at the end of a line) can, by changing where the comment begins or ends. Therefore, only trigraphs that would form escaped newlines produce warnings inside a comment.

This option is implied by -Wall. If -Wall is not given, this option is still enabled unless trigraphs are enabled. To get trigraph conversion without warnings, but get the other -Wall warnings, use `-trigraphs -Wall -Wno-trigraphs'.

-Wtraditional
Warn about certain constructs that behave differently in traditional and ISO C. Also warn about ISO C constructs that have no traditional C equivalent, and problematic constructs which should be avoided. See Traditional Mode.
-Wimport
Warn the first time `#import' is used.
-Wundef
Warn whenever an identifier which is not a macro is encountered in an `#if' directive, outside of `defined'. Such identifiers are replaced with zero.
-Wunused-macros
Warn about macros defined in the main file that are unused. A macro is used if it is expanded or tested for existence at least once. The preprocessor will also warn if the macro has not been used at the time it is redefined or undefined.

Built-in macros, macros defined on the command line, and macros defined in include files are not warned about.

Note: If a macro is actually used, but only used in skipped conditional blocks, then CPP will report it as unused. To avoid the warning in such a case, you might improve the scope of the macro's definition by, for example, moving it into the first skipped block. Alternatively, you could provide a dummy use with something like:

          #if defined the_macro_causing_the_warning
          #endif
     

-Wendif-labels
Warn whenever an `#else' or an `#endif' are followed by text. This usually happens in code of the form
          #if FOO
          ...
          #else FOO
          ...
          #endif FOO
     

The second and third FOO should be in comments, but often are not in older programs. This warning is on by default.

-Werror
Make all warnings into hard errors. Source code which triggers warnings will be rejected.
-Werror-maybe-reset
Act like `-Wno-error' if the GCC_NO_WERROR environment variable is set to anything other than 0 or empty.
-Wsystem-headers
Issue warnings for code in system headers. These are normally unhelpful in finding bugs in your own code, therefore suppressed. If you are responsible for the system library, you may want to see them.
-w
Suppress all warnings, including those which GNU CPP issues by default.
-pedantic
Issue all the mandatory diagnostics listed in the C standard. Some of them are left out by default, since they trigger frequently on harmless code.
-pedantic-errors
Issue all the mandatory diagnostics, and make all mandatory diagnostics into errors. This includes mandatory diagnostics that GCC issues without `-pedantic' but treats as warnings.
-M
Instead of outputting the result of preprocessing, output a rule suitable for make describing the dependencies of the main source file. The preprocessor outputs one make rule containing the object file name for that source file, a colon, and the names of all the included files, including those coming from -include or -imacros command line options.

Unless specified explicitly (with -MT or -MQ), the object file name consists of the basename of the source file with any suffix replaced with object file suffix. If there are many included files then the rule is split into several lines using `\'-newline. The rule has no commands.

This option does not suppress the preprocessor's debug output, such as -dM. To avoid mixing such debug output with the dependency rules you should explicitly specify the dependency output file with -MF, or use an environment variable like DEPENDENCIES_OUTPUT (see Environment Variables). Debug output will still be sent to the regular output stream as normal.

Passing -M to the driver implies -E, and suppresses warnings with an implicit -w.

-MM
Like -M but do not mention header files that are found in system header directories, nor header files that are included, directly or indirectly, from such a header.

This implies that the choice of angle brackets or double quotes in an `#include' directive does not in itself determine whether that header will appear in -MM dependency output. This is a slight change in semantics from GCC versions 3.0 and earlier.


-MF file
When used with -M or -MM, specifies a file to write the dependencies to. If no -MF switch is given the preprocessor sends the rules to the same place it would have sent preprocessed output.

When used with the driver options -MD or -MMD, -MF overrides the default dependency output file.

-MG
In conjunction with an option such as -M requesting dependency generation, -MG assumes missing header files are generated files and adds them to the dependency list without raising an error. The dependency filename is taken directly from the #include directive without prepending any path. -MG also suppresses preprocessed output, as a missing header file renders this useless.

This feature is used in automatic updating of makefiles.

-MP
This option instructs CPP to add a phony target for each dependency other than the main file, causing each to depend on nothing. These dummy rules work around errors make gives if you remove header files without updating the Makefile to match.

This is typical output:

          test.o: test.c test.h
          
          test.h:
     

-MT target
Change the target of the rule emitted by dependency generation. By default CPP takes the name of the main input file, including any path, deletes any file suffix such as `.c', and appends the platform's usual object suffix. The result is the target.

An -MT option will set the target to be exactly the string you specify. If you want multiple targets, you can specify them as a single argument to -MT, or use multiple -MT options.

For example, -MT '$(objpfx)foo.o' might give

          $(objpfx)foo.o: foo.c
     

-MQ target
Same as -MT, but it quotes any characters which are special to Make. -MQ '$(objpfx)foo.o' gives
          $$(objpfx)foo.o: foo.c
     

The default target is automatically quoted, as if it were given with -MQ.

-MD
-MD is equivalent to -M -MF file, except that -E is not implied. The driver determines file based on whether an -o option is given. If it is, the driver uses its argument but with a suffix of .d, otherwise it take the basename of the input file and applies a .d suffix.

If -MD is used in conjunction with -E, any -o switch is understood to specify the dependency output file (but see -MF), but if used without -E, each -o is understood to specify a target object file.

Since -E is not implied, -MD can be used to generate a dependency output file as a side-effect of the compilation process.

-MMD
Like -MD except mention only user header files, not system -header files.
-x c
-x c++
-x objective-c
-x assembler-with-cpp
Specify the source language: C, C++, Objective-C, or assembly. This has nothing to do with standards conformance or extensions; it merely selects which base syntax to expect. If you give none of these options, cpp will deduce the language from the extension of the source file: `.c', `.cc', `.m', or `.S'. Some other common extensions for C++ and assembly are also recognized. If cpp does not recognize the extension, it will treat the file as C; this is the most generic mode.

Note: Previous versions of cpp accepted a -lang option which selected both the language and the standards conformance level. This option has been removed, because it conflicts with the -l option.

-std=standard
-ansi
Specify the standard to which the code should conform. Currently CPP knows about C and C++ standards; others may be added in the future.

standard may be one of:

iso9899:1990
c89
The ISO C standard from 1990. `c89' is the customary shorthand for this version of the standard.

The -ansi option is equivalent to -std=c89.

iso9899:199409
The 1990 C standard, as amended in 1994.
iso9899:1999
c99
iso9899:199x
c9x
The revised ISO C standard, published in December 1999. Before publication, this was known as C9X.
gnu89
The 1990 C standard plus GNU extensions. This is the default.
gnu99
gnu9x
The 1999 C standard plus GNU extensions.
c++98
The 1998 ISO C++ standard plus amendments.
gnu++98
The same as -std=c++98 plus GNU extensions. This is the default for C++ code.

-I-
Split the include path. Any directories specified with -I options before -I- are searched only for headers requested with #include "file"; they are not searched for #include <file>. If additional directories are specified with -I options after the -I-, those directories are searched for all `#include' directives.

In addition, -I- inhibits the use of the directory of the current file directory as the first search directory for #include "file". See Search Path.

-nostdinc
Do not search the standard system directories for header files. Only the directories you have specified with -I options (and the directory of the current file, if appropriate) are searched.
-nostdinc++
Do not search for header files in the C++-specific standard directories, but do still search the other standard directories. (This option is used when building the C++ library.)
-include file
Process file as if #include "file" appeared as the first line of the primary source file. However, the first directory searched for file is the preprocessor's working directory instead of the directory containing the main source file. If not found there, it is searched for in the remainder of the #include "..." search chain as normal.

If multiple -include options are given, the files are included in the order they appear on the command line.

-imacros file
Exactly like -include, except that any output produced by scanning file is thrown away. Macros it defines remain defined. This allows you to acquire all the macros from a header without also processing its declarations.

All files specified by -imacros are processed before all files specified by -include.

-idirafter dir
Search dir for header files, but do it after all directories specified with -I and the standard system directories have been exhausted. dir is treated as a system include directory.
-iprefix prefix
Specify prefix as the prefix for subsequent -iwithprefix options. If the prefix represents a directory, you should include the final `/'.
-iwithprefix dir
-iwithprefixbefore dir
Append dir to the prefix specified previously with -iprefix, and add the resulting directory to the include search path. -iwithprefixbefore puts it in the same place -I would; -iwithprefix puts it where -idirafter would.
-isystem dir
Search dir for header files, after all directories specified by -I but before the standard system directories. Mark it as a system directory, so that it gets the same special treatment as is applied to the standard system directories. See System Headers.
-fdollars-in-identifiers
Accept `$' in identifiers. See Identifier characters.
-fpreprocessed
Indicate to the preprocessor that the input file has already been preprocessed. This suppresses things like macro expansion, trigraph conversion, escaped newline splicing, and processing of most directives. The preprocessor still recognizes and removes comments, so that you can pass a file preprocessed with -C to the compiler without problems. In this mode the integrated preprocessor is little more than a tokenizer for the front ends.

-fpreprocessed is implicit if the input file has one of the extensions `.i', `.ii' or `.mi'. These are the extensions that GCC uses for preprocessed files created by -save-temps.

-ftabstop=width
Set the distance between tab stops. This helps the preprocessor report correct column numbers in warnings or errors, even if tabs appear on the line. If the value is less than 1 or greater than 100, the option is ignored. The default is 8.
-fexec-charset=charset
Set the execution character set, used for string and character constants. The default is UTF-8. charset can be any encoding supported by the system's iconv library routine.
-fwide-exec-charset=charset
Set the wide execution character set, used for wide string and character constants. The default is UTF-32 or UTF-16, whichever corresponds to the width of wchar_t. As with -ftarget-charset, charset can be any encoding supported by the system's iconv library routine; however, you will have problems with encodings that do not fit exactly in wchar_t.
-finput-charset=charset
Set the input character set, used for translation from the character set of the input file to the source character set used by GCC. If the locale does not specify, or GCC cannot get this information from the locale, the default is UTF-8. This can be overridden by either the locale or this command line option. Currently the command line option takes precedence if there's a conflict. charset can be any encoding supported by the system's iconv library routine.
-fworking-directory
Enable generation of linemarkers in the preprocessor output that will let the compiler know the current working directory at the time of preprocessing. When this option is enabled, the preprocessor will emit, after the initial linemarker, a second linemarker with the current working directory followed by two slashes. GCC will use this directory, when it's present in the preprocessed input, as the directory emitted as the current working directory in some debugging information formats. This option is implicitly enabled if debugging information is enabled, but this can be inhibited with the negated form -fno-working-directory. If the -P flag is present in the command line, this option has no effect, since no #line directives are emitted whatsoever.
-fno-show-column
Do not print column numbers in diagnostics. This may be necessary if diagnostics are being scanned by a program that does not understand the column numbers, such as dejagnu.
-A predicate=answer
Make an assertion with the predicate predicate and answer answer. This form is preferred to the older form -A predicate(answer), which is still supported, because it does not use shell special characters. See Assertions.
-A -predicate=answer
Cancel an assertion with the predicate predicate and answer answer.
-dCHARS
CHARS is a sequence of one or more of the following characters, and must not be preceded by a space. Other characters are interpreted by the compiler proper, or reserved for future versions of GCC, and so are silently ignored. If you specify characters whose behavior conflicts, the result is undefined.
`M'
Instead of the normal output, generate a list of `#define' directives for all the macros defined during the execution of the preprocessor, including predefined macros. This gives you a way of finding out what is predefined in your version of the preprocessor. Assuming you have no file foo.h, the command
               touch foo.h; cpp -dM foo.h
          

will show all the predefined macros.

`D'
Like `M' except in two respects: it does not include the predefined macros, and it outputs both the `#define' directives and the result of preprocessing. Both kinds of output go to the standard output file.
`N'
Like `D', but emit only the macro names, not their expansions.
`I'
Output `#include' directives in addition to the result of preprocessing.

-P
Inhibit generation of linemarkers in the output from the preprocessor. This might be useful when running the preprocessor on something that is not C code, and will be sent to a program which might be confused by the linemarkers. See Preprocessor Output.
-C
Do not discard comments. All comments are passed through to the output file, except for comments in processed directives, which are deleted along with the directive.

You should be prepared for side effects when using -C; it causes the preprocessor to treat comments as tokens in their own right. For example, comments appearing at the start of what would be a directive line have the effect of turning that line into an ordinary source line, since the first token on the line is no longer a `#'.

-CC
Do not discard comments, including during macro expansion. This is like -C, except that comments contained within macros are also passed through to the output file where the macro is expanded.

In addition to the side-effects of the -C option, the -CC option causes all C++-style comments inside a macro to be converted to C-style comments. This is to prevent later use of that macro from inadvertently commenting out the remainder of the source line.

The -CC option is generally used to support lint comments.

-traditional-cpp
Try to imitate the behavior of old-fashioned C preprocessors, as opposed to ISO C preprocessors. See Traditional Mode.
-trigraphs
Process trigraph sequences. See Initial processing.
-remap
Enable special code to work around file systems which only permit very short file names, such as MS-DOS.
--help
--target-help
Print text describing all the command line options instead of preprocessing anything.
-v
Verbose mode. Print out GNU CPP's version number at the beginning of execution, and report the final form of the include path.
-H
Print the name of each header file used, in addition to other normal activities. Each name is indented to show how deep in the `#include' stack it is. Precompiled header files are also printed, even if they are found to be invalid; an invalid precompiled header file is printed with `...x' and a valid one with `...!' .
-version
--version
Print out GNU CPP's version number. With one dash, proceed to preprocess as normal. With two dashes, exit immediately.


Next: , Previous: Invocation, Up: Top

13 Environment Variables

This section describes the environment variables that affect how CPP operates. You can use them to specify directories or prefixes to use when searching for include files, or to control dependency output.

Note that you can also specify places to search using options such as -I, and control dependency output with options like -M (see Invocation). These take precedence over environment variables, which in turn take precedence over the configuration of GCC.

CPATH
C_INCLUDE_PATH
CPLUS_INCLUDE_PATH
OBJC_INCLUDE_PATH
Each variable's value is a list of directories separated by a special character, much like PATH, in which to look for header files. The special character, PATH_SEPARATOR, is target-dependent and determined at GCC build time. For Microsoft Windows-based targets it is a semicolon, and for almost all other targets it is a colon.

CPATH specifies a list of directories to be searched as if specified with -I, but after any paths given with -I options on the command line. This environment variable is used regardless of which language is being preprocessed.

The remaining environment variables apply only when preprocessing the particular language indicated. Each specifies a list of directories to be searched as if specified with -isystem, but after any paths given with -isystem options on the command line.

In all these variables, an empty element instructs the compiler to search its current working directory. Empty elements can appear at the beginning or end of a path. For instance, if the value of CPATH is :/special/include, that has the same effect as `-I. -I/special/include'.

See also Search Path.

DEPENDENCIES_OUTPUT
If this variable is set, its value specifies how to output dependencies for Make based on the non-system header files processed by the compiler. System header files are ignored in the dependency output.

The value of DEPENDENCIES_OUTPUT can be just a file name, in which case the Make rules are written to that file, guessing the target name from the source file name. Or the value can have the form `file target', in which case the rules are written to file file using target as the target name.

In other words, this environment variable is equivalent to combining the options -MM and -MF (see Invocation), with an optional -MT switch too.

SUNPRO_DEPENDENCIES
This variable is the same as DEPENDENCIES_OUTPUT (see above), except that system header files are not ignored, so it implies -M rather than -MM. However, the dependence on the main input file is omitted. See Invocation.


Next: , Previous: Environment Variables, Up: Top

GNU Free Documentation License

MIROS REMARKS

Although most of the GNU documentation is covered by the so-called "Free Documentation License", this is not considered a free or open source licence and will never pass OSI certification. GFDL-licenced documents are NOT eligible for inclusion into MirOS.

However, for practical reasons, we have decided to deliver the GCC documentation for MirOS GCC along, since it is not part of MirOS itself, and the binutils documentation with MirOS because it would only cripple our users.

Please bear in mind that you cannot freely reproduce or change these documents. MirOS-specific changes are only allowed if they are reassigned to the FSF.

If you received this document with MirOS, information on how to find the sources (original FSF and patched MirOS) to the "opaque" Texinfo versions of this document can be found in the README file accompanying the "gcc" (for GCC) or "src" (for Binutils) module, or in the directory /usr/share/doc/legal/ after installation. If you did not receive this document with MirOS, you can safely delete this paragraph as an additional freedom granted to the below licence terms.

Version 1.2, November 2002
     Copyright © 2000,2001,2002 Free Software Foundation, Inc.
     59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
     
     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.
  1. PREAMBLE

    The purpose of this License is to make a manual, textbook, or other functional and useful document free in the sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to get credit for their work, while not being considered responsible for modifications made by others.

    This License is a kind of “copyleft”, which means that derivative works of the document must themselves be free in the same sense. It complements the GNU General Public License, which is a copyleft license designed for free software.

    We have designed this License in order to use it for manuals for free software, because free software needs free documentation: a free program should come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction or reference.

  2. APPLICABILITY AND DEFINITIONS

    This License applies to any manual or other work, in any medium, that contains a notice placed by the copyright holder saying it can be distributed under the terms of this License. Such a notice grants a world-wide, royalty-free license, unlimited in duration, to use that work under the conditions stated herein. The “Document”, below, refers to any such manual or work. Any member of the public is a licensee, and is addressed as “you”. You accept the license if you copy, modify or distribute the work in a way requiring permission under copyright law.

    A “Modified Version” of the Document means any work containing the Document or a portion of it, either copied verbatim, or with modifications and/or translated into another language.

    A “Secondary Section” is a named appendix or a front-matter section of the Document that deals exclusively with the relationship of the publishers or authors of the Document to the Document's overall subject (or to related matters) and contains nothing that could fall directly within that overall subject. (Thus, if the Document is in part a textbook of mathematics, a Secondary Section may not explain any mathematics.) The relationship could be a matter of historical connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or political position regarding them.

    The “Invariant Sections” are certain Secondary Sections whose titles are designated, as being those of Invariant Sections, in the notice that says that the Document is released under this License. If a section does not fit the above definition of Secondary then it is not allowed to be designated as Invariant. The Document may contain zero Invariant Sections. If the Document does not identify any Invariant Sections then there are none.

    The “Cover Texts” are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document is released under this License. A Front-Cover Text may be at most 5 words, and a Back-Cover Text may be at most 25 words.

    A “Transparent” copy of the Document means a machine-readable copy, represented in a format whose specification is available to the general public, that is suitable for revising the document straightforwardly with generic text editors or (for images composed of pixels) generic paint programs or (for drawings) some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text formatters. A copy made in an otherwise Transparent file format whose markup, or absence of markup, has been arranged to thwart or discourage subsequent modification by readers is not Transparent. An image format is not Transparent if used for any substantial amount of text. A copy that is not “Transparent” is called “Opaque”.

    Examples of suitable formats for Transparent copies include plain ascii without markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple HTML, PostScript or PDF designed for human modification. Examples of transparent image formats include PNG, XCF and JPG. Opaque formats include proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated HTML, PostScript or PDF produced by some word processors for output purposes only.

    The “Title Page” means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, “Title Page” means the text near the most prominent appearance of the work's title, preceding the beginning of the body of the text.

    A section “Entitled XYZ” means a named subunit of the Document whose title either is precisely XYZ or contains XYZ in parentheses following text that translates XYZ in another language. (Here XYZ stands for a specific section name mentioned below, such as “Acknowledgements”, “Dedications”, “Endorsements”, or “History”.) To “Preserve the Title” of such a section when you modify the Document means that it remains a section “Entitled XYZ” according to this definition.

    The Document may include Warranty Disclaimers next to the notice which states that this License applies to the Document. These Warranty Disclaimers are considered to be included by reference in this License, but only as regards disclaiming warranties: any other implication that these Warranty Disclaimers may have is void and has no effect on the meaning of this License.

  3. VERBATIM COPYING

    You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3.

    You may also lend copies, under the same conditions stated above, and you may publicly display copies.

  4. COPYING IN QUANTITY

    If you publish printed copies (or copies in media that commonly have printed covers) of the Document, numbering more than 100, and the Document's license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects.

    If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed (as many as fit reasonably) on the actual cover, and continue the rest onto adjacent pages.

    If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a computer-network location from which the general network-using public has access to download using public-standard network protocols a complete Transparent copy of the Document, free of added material. If you use the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public.

    It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance to provide you with an updated version of the Document.

  5. MODIFICATIONS

    You may copy and distribute a Modified Version of the Document under the conditions of sections 2 and 3 above, provided that you release the Modified Version under precisely this License, with the Modified Version filling the role of the Document, thus licensing distribution and modification of the Modified Version to whoever possesses a copy of it. In addition, you must do these things in the Modified Version:

    1. Use in the Title Page (and on the covers, if any) a title distinct from that of the Document, and from those of previous versions (which should, if there were any, be listed in the History section of the Document). You may use the same title as a previous version if the original publisher of that version gives permission.
    2. List on the Title Page, as authors, one or more persons or entities responsible for authorship of the modifications in the Modified Version, together with at least five of the principal authors of the Document (all of its principal authors, if it has fewer than five), unless they release you from this requirement.
    3. State on the Title page the name of the publisher of the Modified Version, as the publisher.
    4. Preserve all the copyright notices of the Document.
    5. Add an appropriate copyright notice for your modifications adjacent to the other copyright notices.
    6. Include, immediately after the copyright notices, a license notice giving the public permission to use the Modified Version under the terms of this License, in the form shown in the Addendum below.
    7. Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the Document's license notice.
    8. Include an unaltered copy of this License.
    9. Preserve the section Entitled “History”, Preserve its Title, and add to it an item stating at least the title, year, new authors, and publisher of the Modified Version as given on the Title Page. If there is no section Entitled “History” in the Document, create one stating the title, year, authors, and publisher of the Document as given on its Title Page, then add an item describing the Modified Version as stated in the previous sentence.
    10. Preserve the network location, if any, given in the Document for public access to a Transparent copy of the Document, and likewise the network locations given in the Document for previous versions it was based on. These may be placed in the “History” section. You may omit a network location for a work that was published at least four years before the Document itself, or if the original publisher of the version it refers to gives permission.
    11. For any section Entitled “Acknowledgements” or “Dedications”, Preserve the Title of the section, and preserve in the section all the substance and tone of each of the contributor acknowledgements and/or dedications given therein.
    12. Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers or the equivalent are not considered part of the section titles.
    13. Delete any section Entitled “Endorsements”. Such a section may not be included in the Modified Version.
    14. Do not retitle any existing section to be Entitled “Endorsements” or to conflict in title with any Invariant Section.
    15. Preserve any Warranty Disclaimers.

    If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modified Version's license notice. These titles must be distinct from any other section titles.

    You may add a section Entitled “Endorsements”, provided it contains nothing but endorsements of your Modified Version by various parties—for example, statements of peer review or that the text has been approved by an organization as the authoritative definition of a standard.

    You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one.

    The author(s) and publisher(s) of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement of any Modified Version.

  6. COMBINING DOCUMENTS

    You may combine the Document with other documents released under this License, under the terms defined in section 4 above for modified versions, provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodified, and list them all as Invariant Sections of your combined work in its license notice, and that you preserve all their Warranty Disclaimers.

    The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant Sections in the license notice of the combined work.

    In the combination, you must combine any sections Entitled “History” in the various original documents, forming one section Entitled “History”; likewise combine any sections Entitled “Acknowledgements”, and any sections Entitled “Dedications”. You must delete all sections Entitled “Endorsements.”

  7. COLLECTIONS OF DOCUMENTS

    You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects.

    You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document.

  8. AGGREGATION WITH INDEPENDENT WORKS

    A compilation of the Document or its derivatives with other separate and independent documents or works, in or on a volume of a storage or distribution medium, is called an “aggregate” if the copyright resulting from the compilation is not used to limit the legal rights of the compilation's users beyond what the individual works permit. When the Document is included an aggregate, this License does not apply to the other works in the aggregate which are not themselves derivative works of the Document.

    If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is less than one half of the entire aggregate, the Document's Cover Texts may be placed on covers that bracket the Document within the aggregate, or the electronic equivalent of covers if the Document is in electronic form. Otherwise they must appear on printed covers that bracket the whole aggregate.

  9. TRANSLATION

    Translation is considered a kind of modification, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition to the original versions of these Invariant Sections. You may include a translation of this License, and all the license notices in the Document, and any Warrany Disclaimers, provided that you also include the original English version of this License and the original versions of those notices and disclaimers. In case of a disagreement between the translation and the original version of this License or a notice or disclaimer, the original version will prevail.

    If a section in the Document is Entitled “Acknowledgements”, “Dedications”, or “History”, the requirement (section 4) to Preserve its Title (section 1) will typically require changing the actual title.

  10. TERMINATION

    You may not copy, modify, sublicense, or distribute the Document except as expressly provided for under this License. Any other attempt to copy, modify, sublicense or distribute the Document is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

  11. FUTURE REVISIONS OF THIS LICENSE

    The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. See http://www.gnu.org/copyleft/.

    Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License “or any later version” applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published (not as a draft) by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published (not as a draft) by the Free Software Foundation.

ADDENDUM: How to use this License for your documents

To use this License in a document you have written, include a copy of the License in the document and put the following copyright and license notices just after the title page:

       Copyright (C)  year  your name.
       Permission is granted to copy, distribute and/or modify this document
       under the terms of the GNU Free Documentation License, Version 1.2
       or any later version published by the Free Software Foundation;
       with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
       A copy of the license is included in the section entitled ``GNU
       Free Documentation License''.

If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, replace the “with...Texts.” line with this:

         with the Invariant Sections being list their titles, with
         the Front-Cover Texts being list, and with the Back-Cover Texts
         being list.

If you have Invariant Sections without Cover Texts, or some other combination of the three, merge those two alternatives to suit the situation.

If your document contains nontrivial examples of program code, we recommend releasing these examples in parallel under your choice of free software license, such as the GNU General Public License, to permit their use in free software.


Next: , Previous: GNU Free Documentation License, Up: Top

Index of Directives


Next: , Previous: Index of Directives, Up: Top

Option Index

CPP's command line options and environment variables are indexed here without any initial `-' or `--'.


Previous: Option Index, Up: Top

Concept Index


Footnotes

[1] UTF-16 does not meet the requirements of the C standard for a wide character set, but the choice of 16-bit wchar_t is enshrined in some system ABIs so we cannot fix this.

[2] The C standard uses the term string literal to refer only to what we are calling string constants.