MirOS Manual: ratecheck(9)

RATECHECK(9)                  BSD Kernel Manual                   RATECHECK(9)


     ratecheck - function to help implement rate-limited actions


     #include <sys/time.h>

     ratecheck(struct timeval *lasttime, const struct timeval *mininterval);


     The ratecheck() function provides a simple time interval check which can
     be used when implementing time-based rate-limited actions. If the differ-
     ence between the current monotonically-increasing system time (mono_time)
     and lasttime is less than the value given by the mininterval argument,
     zero is returned. Otherwise, lasttime is set to the current time and a
     non-zero value is returned.

     The motivation for implementing ratecheck() was to provide a mechanism
     that could be used to add rate limiting to diagnostic message output. If
     printed too often, diagnostic messages can keep the system from doing
     useful work. If the repeated messages can be caused by deliberate user
     action or network events, they can be exploited to cause denial of system

     Note that using a very short time interval (less than a second) for
     mininterval defeats the purpose of this function. (It doesn't take much
     to flood a 9600 baud serial console with output, for instance.)


     Here is a simple example of use of the ratecheck() function:

      * The following variables could be global, in a device softc, etc.,
      * depending on the exact usage.
     struct timeval drv_lasterr1time;   /* time of last err1 message */
     long drv_err1count;                /* # of err1 errs since last msg */
     struct timeval drv_lasterr2time;   /* time of last err2 message */
     long drv_err2count;                /* # of err2 errs since last msg */

      * The following variable will often be global or shared by all
      * instances of a driver.  It should be initialized, so it can be
      * patched.  Allowing it to be set via an option might be nice,
      * but could lead to an insane proliferation of options.
     struct timeval drv_errintvl = { 5, 0 };         /* 5 seconds */

     /* error handling/reporting function */
     drv_errhandler(int err1, int err2)

              * Note that you should NOT use the same last-event
              * time variable for dissimilar messages!
             if (err1) {
                     /* handle err1 condition */

                     if (ratecheck(&drv_lasterr1notice,
                         &drv_errinterval)) {
                             printf("drv: %ld err1 errors occurred",
                             drv_err1count = 0;
             if (err2) {
                     /* handle err2 condition */

                     if (ratecheck(&drv_lasterr2notice,
                         &drv_errinterval)) {
                             printf("drv: %ld err2 errors occurred",
                             drv_err2count = 0;


     log(9), printf(9), time(9)


     The ratecheck() function first appeared in NetBSD 1.5.

MirOS BSD #10-current          February 2, 2000                              1

Generated on 2017-04-03 16:26:17 by $MirOS: src/scripts/roff2htm,v 1.88 2017/01/29 00:51:06 tg Exp $

These manual pages and other documentation are copyrighted by their respective writers; their source is available at our CVSweb, AnonCVS, and other mirrors. The rest is Copyright © 2002–2017 The MirOS Project, Germany.
This product includes material provided by mirabilos.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report — diffs preferred.