SWAPCTL(8) BSD System Manager's Manual SWAPCTL(8)
swapctl, swapon - system swap management tool
swapctl -A [-p priority] [-t blk|noblk] swapctl -a [-p priority] path swapctl -c -p priority path swapctl -d path swapctl -l | -s [-k] swapon -a | path
The swapctl program adds, removes, lists and prioritizes swap devices and files for the system. The swapon program acts the same as the swapctl program, as if called with the -a option, except if swapon itself is called with -a, in which case swapon acts as swapctl with the -A option. Note: The initial swap device (root disk, partition b) is handled au- tomatically by the kernel and does not need to be added to /etc/fstab or added via swapctl. It will show up as "swap_device" in the output displayed with the -l flag. The options are as follows: -A This option causes swapctl to read the /etc/fstab file for dev- ices and files with an "sw" type, and adds all these entries as swap devices. If no swap devices are configured, swapctl will exit with an error code. -a The -a option requires that a path also be in the argument list. The path is added to the kernel's list of swap devices using the swapctl(2) system call. When using the swapon form of this com- mand, the -a option is treated the same as the -A option, for backwards compatibility. -c The -c option changes the priority of the listed swap device or file. -d path The -d option removes the listed path from the kernel's list of swap devices or files. -l The -l option lists the current swap devices and files, and their usage statistics. -s The -s option displays a single line summary of current swap statistics. -p priority The -p option sets the priority of swap devices or files to the priority argument. This works with the -a, -c and -l options. -k The -k option uses 1024 byte blocks instead of the default 512 byte. -t blk|noblk This flag modifies the function of the -A option. The -t option allows the type of device to add to be specified. An argument of blk causes all block devices in /etc/fstab to be added. An argu- ment of noblk causes all non-block devices in /etc/fstab to be added. This option is useful in early system startup, where swap- ping may be needed before all file systems are available, such as during disk checks of large file systems.
When parsing the /etc/fstab file for swap devices, lines such as the fol- lowing specify additional swap devices: /dev/sd1b none swap sw 0 0 Additional flags include: priority=N This option sets the priority of the specified swap dev- ice to N. The highest priority is 0, second priority is 1, etc. nfsmntpt=/path This option is useful for swapping to NFS files. It specifies the local mount point to mount an NFS filesys- tem. Typically, once this mount has succeeded, the file to be used for swapping on will be available under this point mount. For example: server:/export/swap/client none swap sw,nfsmntpt=/swap
Local and remote swap files cannot be configured until the file systems they reside on are mounted read/write. The system startup scripts need to fsck(8) all local file systems before this can happen. This process re- quires substantial amounts of memory on some systems. If one configures no local block swap devices on a machine that has local file systems to check and rely only on swap files, the machine will have no swap space at all during system fsck(8) and may run out of real memory, causing fsck to abnormally exit and startup scripts to fail.
swapctl(2), fstab(5), mount_nfs(8), vnconfig(8)
The swapctl program was originally developed in NetBSD 1.3. It was ported to OpenBSD 2.6 by Tobias Weingartner. The original swapon program, pro- vided for backwards compatibility, appeared in 4.0BSD. The default prior- ity was changed from 0 to 1 in MirOS #8.
The swapctl program was written by Matthew R. Green <email@example.com>. MirOS BSD #10-current June 12, 1997 1
Generated on 2013-10-31 22:57:03 by $MirOS: src/scripts/roff2htm,v 1.77 2013/01/01 20:49:09 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002‒2013 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.