ISAKMPD.CONF(5) BSD Reference Manual ISAKMPD.CONF(5)
isakmpd.conf - configuration file for isakmpd
isakmpd.conf is the configuration file for the isakmpd(8) daemon, manag-
ing security association and key management for the IPsec layer of the
kernel's networking stack.
The file is of a well known type of format called .INI style, named after
the suffix used by an overrated windowing environment for its configura-
tion files. This format consists of sections, each beginning with a line
looking like:
[Section name]
Between the brackets is the name of the section following this section
header. Inside a section many tag/value pairs can be stored, each one
looking like:
Tag=Value
If the value needs more space than fits on a single line, it's possible
to continue it on the next by ending the first with a backslash character
immediately before the newline character. This method can extend a value
for an arbitrary number of lines.
Comments can be put anywhere in the file by using a hash mark ('#'). The
comment extends to the end of the current line.
Often the right-hand side values consist of other section names. This
results in a tree structure. Some values are treated as a list of several
scalar values. Such lists always use a comma character as the separator.
Some values are formatted like this: X,Y:Z, which is an offer/accept syn-
tax, where X is a value we offer and Y:Z is a range of accepted values,
inclusive.
To activate changes to isakmpd.conf without restarting isakmpd(8), send a
SIGHUP signal to the daemon process.
AUTO-GENERATED PARTS OF THE CONFIGURATION
Some predefined section names are recognized by the daemon, avoiding the
need to fully specify the Main Mode transforms and Quick Mode suites,
protocols, and transforms.
For Main Mode:
{DES,BLF,3DES,CAST,AES}-{MD5,SHA}[-GRP{1,2,5,14}][-{DSS,RSA_SIG}]
For Quick Mode:
QM-{proto}[-TRP]-{cipher}[-{hash}][-PFS[-{group}]]-SUITE
where:
{proto} is either ESP or AH
{cipher} is either DES, 3DES, CAST, BLF, or AES
{hash} is either MD5, SHA, RIPEMD, or SHA2-{256,384,512}
{group} is either GRP1, GRP2, GRP5, or GRP14
For example, 3DES-SHA means: 3DES encryption, SHA hash, and authorization
by pre-shared keys. Similarly, QM-ESP-3DES-SHA-PFS-SUITE means: ESP pro-
tocol, 3DES encryption, SHA hash, and use Perfect Forward Secrecy.
Unless explicitly stated with -GRP1, 2, 5, or 14, transforms and PFS
suites use DH group 2. There are currently no predefined ESP+AH Quick
Mode suites.
The predefinitions include some default values for the special sections
"General", "Keynote", "X509-certificates", and "Default-phase-1-
configuration". These default values are presented in the example below.
All autogenerated values can be overridden by manual entries by using the
same section and tag names in the configuration file. In particular, the
default phase 1 (Main or Aggressive Mode) and phase 2 (Quick Mode) life-
times can be overridden by these tags under the "General" section:
[General]
Default-phase-1-lifetime= 3600,60:86400
Default-phase-2-lifetime= 1200,60:86400
The Main Mode lifetime currently defaults to one hour (minimum 60
seconds, maximum 1 day). The Quick Mode lifetime defaults to 20 minutes
(minimum 60 seconds, maximum 1 day).
Also, the default phase 1 ID can be set by creating a <Phase1-ID> sec-
tion, as shown below, and adding this tag under the "General" section:
[General]
Default-phase-1-ID= Phase1-ID-name
[Phase1-ID-name]
ID-type= USER_FQDN
Name= foo@bar.com
[General] Generic global configuration parameters
Acquire-Only
If this tag is defined, isakmpd(8) will not set up
flows automatically. This is useful when flows are con-
figured with ipsecadm(8) or by other programs like
bgpd(8). Thus isakmpd(8) only takes care of the SA es-
tablishment.
Check-interval
The interval between watchdog checks of connections we
want up at all times, in seconds. The default value is
60 seconds.
Default-phase-1-ID
Optional default phase 1 ID name.
Default-phase-1-lifetime
The default lifetime for autogenerated transforms
(phase 1). If unspecified, the value 3600,60:86400 is
used as the default.
Default-phase-2-lifetime
The default lifetime for autogenerated suites (phase
2). If unspecified, the value 1200,60:86400 is used as
the default.
Default-phase-2-suites
A list of phase 2 suites that will be used when estab-
lishing dynamic SAs. If left unspecified, QM-ESP-3DES-
SHA-PFS-SUITE is used as the default.
DPD-check-interval
The interval between RFC 3706 (Dead Peer Detection)
messages, in seconds. The default value is 0 (zero),
which means DPD is disabled.
Exchange-max-time
How many seconds should an exchange maximally take to
set up before we give up.
Listen-on
A list of IP addresses or interface names OK to listen
on. This list is used as a filter for the set of ad-
dresses the interfaces configured provides. This means
that we won't see if an address given here does not ex-
ist on this host, and thus no error is given for that
case.
Loglevel
A list of the form class=level, where both class and
level are numbers. This is similar to the -D command
line switch of isakmpd(8).
Logverbose
If this tag is defined, whatever the value is, verbose
logging is enabled. This is similar to the -v command
line switch of isakmpd(8).
NAT-T-Keepalive
The number of seconds between NAT-T keepalive messages,
sent by the peer behind NAT to keep the mapping active.
Defaults to 20.
Policy-file
The name of the file that contains keynote(4) policies.
The default is /etc/isakmpd/isakmpd.policy.
Pubkey-directory
The directory in which isakmpd.conf looks for explicit-
ly trusted public keys. The default is
/etc/isakmpd/pubkeys. Read isakmpd(8) for the required
naming convention of the files in here.
Renegotiate-on-HUP
If this tag is defined, whatever the value is,
isakmpd(8) will renegotiate all current phase 2 SAs
when the daemon receives a SIGHUP signal, or an 'R' is
sent to the FIFO interface (see isakmpd(8)).
Retransmits
How many times should a message be retransmitted before
giving up.
Shared-SADB
If this tag is defined, whatever the value is, some se-
mantics of isakmpd.conf are changed so that multiple
instances can run on top of one SADB and set up SAs
with each other. Specifically this means replay protec-
tion will not be asked for, and errors that can occur
when updating an SA with its parameters a 2nd time will
be ignored.
Use-Keynote
This tag controls the use of keynote(4) policy check-
ing. The default value is "yes", which enables the pol-
icy checking. When set to any other value, policies
will not be checked. This is useful when policies for
flows and SA establishment are arranged by other pro-
grams like ipsecadm(8) or bgpd(8).
[Phase 1] ISAKMP SA negotiation parameter root
Default
A name of the default ISAKMP peer. Incoming phase 1
connections from other IP addresses will use this peer
name. This name is used as the section name for further
information to be found. Look at <ISAKMP-peer> below.
<IP-address>
A name of the ISAKMP peer at the given IP address.
[Phase 2] IPsec SA negotiation parameter root
Connections
A list of directed IPsec "connection" names that should
be brought up automatically, either on first use if the
system supports it, or at startup of the daemon. These
names are section names where further information can
be found. Look at <IPsec-connection> below. Normally
any connections mentioned here are treated as part of
the "Passive-connection" list we present below; however
there is a flag, Active-only, that disables this
behaviour. This too is mentioned in the <IPsec-
connection> section, in the "Flags" tag.
Passive-connections
A list of IPsec "connection" names we recognize and ac-
cept initiations for. These names are section names
where further information can be found. Look at <IPsec-
connection> below. Currently only the Local-ID and
Remote-ID tags are looked at in those sections, as they
are matched against the IDs given by the initiator.
[KeyNote] KeyNote configuration section
Credential-directory
A directory containing directories named after IDs (IP
addresses, "user@domain", or hostnames) that contain
files named "credentials" and "private_key".
The credentials file contains keynote(4) credentials
that are sent to a remote IKE daemon when we use the
associated ID, or credentials that we may want to con-
sider when doing an exchange with a remote IKE daemon
that uses that ID. Note that, in the former case, the
last credential in the file MUST contain our public key
in its Licensees field. More than one credentials may
exist in the file. They are separated by whitelines
(the format is essentially the same as that of the pol-
icy file). The credentials are of the same format as
the policies described in isakmpd.policy(5). The only
difference is that the Authorizer field contains a pub-
lic key, and the assertion is signed. Signed assertions
can be generated using the keynote(1) utility.
The private_key file contains the private RSA key we
use for authentication. If the directory (and the
files) exist, they take precedence over X509-based au-
thentication.
[X509-Certificates] X509-certificate configuration section
Accept-self-signed
If this tag is defined, whatever the value is, certifi-
cates that do not originate from a trusted CA but are
self-signed will be accepted.
Ca-directory
A directory containing PEM certificates of certifica-
tion authorities that we trust to sign other certifi-
cates. Note that for a CA to be really trusted, it
needs to be somehow referred to by policy, in
isakmpd.policy(5). The certificates in this directory
are used for the actual X.509 authentication and for
cross-referencing policies that refer to Distinguished
Names (DNs). Keeping a separate directory (as opposed
to integrating policies and X.509 CA certificates) al-
lows for maintenance of a list of "well known" CAs
without actually having to trust all (or any) of them.
Cert-directory
A directory containing PEM certificates that we trust
to be valid. These certificates are used in preference
to those passed in messages and are required to have a
subjectAltName extension containing the certificate
holder identity; usually IP address, FQDN, or User
FQDN.
Private-key
The private key matching the public key of our certifi-
cate (which should be in the "Cert-directory", and have
an appropriate subjectAltName field).
REFERRED-TO SECTIONS
<ISAKMP-peer> Parameters for negotiation with an ISAKMP peer
Address
If existent, the IP address of the peer.
Authentication
If existent, authentication data for this specific peer.
In the case of a pre-shared key, this is the key value
itself.
Configuration
The name of the ISAKMP-configuration section to use. Look
at <ISAKMP-configuration> below. If unspecified, defaults
to "Default-phase-1-configuration".
Flags A comma-separated list of flags controlling the further
handling of the ISAKMP SA. Currently there are no specif-
ic ISAKMP SA flags defined.
ID If existent, the name of the section that describes the
local client ID that we should present to our peer. If
not present, it defaults to the address of the local in-
terface we are sending packets over to the remote daemon.
Look at <Phase1-ID> below.
Local-address
The Local IP address to use, if we are multi-homed, or
have aliases.
Phase The constant '1', as ISAKMP-peers and IPsec-connections
really are handled by the same code inside isakmpd(8).
Port For UDP, the UDP port number to send to. This is option-
al; the default value is 500 which is the IANA-registered
number for ISAKMP.
Remote-ID
If existent, the name of the section that describes the
remote client ID we expect the remote daemon to send us.
If not present, it defaults to the address of the remote
daemon. Look at <Phase1-ID> below.
Transport
The name of the transport protocol; defaults to UDP.
<Phase1-ID> Parameters for Phase 1 negotiation
Address
If the ID-type is IPV4_ADDR or IPV6_ADDR, this tag should
exist and be an IP address.
ID-type
The ID type as given by the RFC specifications. For phase
1 this is currently IPV4_ADDR, IPV4_ADDR_SUBNET,
IPV6_ADDR, IPV6_ADDR_SUBNET, FQDN, USER_FQDN, or KEY_ID.
Name If the ID-type is FQDN, USER_FQDN, or KEY_ID, this tag
should exist and contain a domain name, user@domain, or
other identifying string respectively.
In the case of KEY_ID, note that the IKE protocol allows
any octet sequence to be sent or received under this pay-
load, potentially including non-printable ones.
isakmpd(8) can only transmit printable KEY_ID payloads,
but can receive and process arbitrary KEY_ID payloads.
This effectively means that non-printable KEY_ID remote
identities cannot be verified through this means,
although it is still possible to do so through
isakmpd.policy(5).
Netmask
If the ID-type is IPV4_ADDR_SUBNET or IPV6_ADDR_SUBNET,
this tag should exist and be a network subnet mask.
Network
If the ID-type is IPV4_ADDR_SUBNET or IPV6_ADDR_SUBNET,
this tag should exist and be a network address.
<ISAKMP-configuration> Parameters for ISAKMP configuration
DOI The domain of interpretation as given by the RFCs. Nor-
mally IPSEC. If unspecified, defaults to IPSEC.
EXCHANGE_TYPE
The exchange type as given by the RFCs. For main mode
this is ID_PROT and for aggressive mode it is AGGRESSIVE.
Transforms
A list of proposed transforms to use for protecting the
ISAKMP traffic. These are actually names for sections
further describing the transforms. Look at <ISAKMP-
transform> below.
<ISAKMP-transform> Parameters for ISAKMP authentication
AUTHENTICATION_METHOD
The authentication method as the RFCs name it, or ANY.
ENCRYPTION_ALGORITHM
The encryption algorithm as the RFCs name it, or ANY to
denote that any encryption algorithm proposed will be ac-
cepted.
GROUP_DESCRIPTION
The group used for Diffie-Hellman exponentiations, or
ANY. The names are symbolic, like MODP_768, MODP_1024,
EC_155, and EC_185.
HASH_ALGORITHM
The hash algorithm as the RFCs name it, or ANY.
KEY_LENGTH
For encryption algorithms with variable key length, this
is where the offered/accepted keylengths are described.
The value is of the offer-accept kind described above.
Life A list of lifetime descriptions, or ANY. In the former
case, each element is in itself a name of the section
that defines the lifetime. Look at <Lifetime> below. If
it is set to ANY, then any type of proposed lifetime type
and value will be accepted.
PRF The algorithm to use for the keyed pseudo-random function
(used for key derivation and authentication in phase 1),
or ANY.
<Lifetime> Parameters for connection duration
LIFE_DURATION
An offer/accept kind of value; see above. Can also be set
to ANY.
LIFE_TYPE
SECONDS or KILOBYTES depending on the type of the dura-
tion. Notice that this field may NOT be set to ANY.
<IPsec-connection> Parameters for IPsec connection configuration
Configuration
The name of the IPsec-configuration section to use. Look
at <IPsec-configuration> below.
Flags A comma-separated list of flags controlling the further
handling of the IPsec SA. Currently only one flag is de-
fined:
Active-only
If this flag is given and this <IPsec-connection> is
part of the phase 2 connections we automatically
keep up, it will not automatically be used for ac-
cepting connections from the peer.
ISAKMP-peer
The name of the ISAKMP-peer to talk to in order to set up
this connection. The value is the name of an <ISAKMP-
peer> section. See above.
Local-ID
If existent, the name of the section that describes the
optional local client ID that we should present to our
peer. It is also used when we act as responders to find
out what <IPsec-connection> we are dealing with. Look at
<IPsec-ID> below.
Phase The constant '2', as ISAKMP-peers and IPsec-connections
really are handled by the same code inside isakmpd(8).
Remote-ID
If existent, the name of the section that describes the
optional remote client ID that we should present to our
peer. It is also used when we act as responders to find
out what <IPsec-connection> we are dealing with. Look at
<IPsec-ID> below.
<IPsec-configuration> Parameters for IPsec configuration
DOI The domain of interpretation as given by the RFCs. Nor-
mally IPSEC. If unspecified, defaults to IPSEC.
EXCHANGE_TYPE
The exchange type as given by the RFCs. For quick mode
this is QUICK_MODE.
Suites A list of protection suites (bundles of protocols) usable
for protecting the IP traffic. Each of the list elements
is a name of an <IPsec-suite> section. See below.
<IPsec-suite> Parameters for IPsec protection suite configuration
Protocols
A list of the protocols included in this protection
suite. Each of the list elements is a name of an <IPsec-
protocol> section. See below.
<IPsec-protocol> Parameters for IPsec protocol configuration
PROTOCOL_ID
The protocol as given by the RFCs. Acceptable values are
currently IPSEC_AH and IPSEC_ESP.
ReplayWindow
The size of the window used for replay protection. This
is normally left alone. Look at the ESP and AH RFCs for a
better description.
Transforms
A list of transforms usable for implementing the proto-
col. Each of the list elements is a name of an <IPsec-
transform> section. See below.
<IPsec-transform> Parameters for IPsec transform configuration
AUTHENTICATION_ALGORITHM
The optional authentication algorithm in the case of this
being an ESP transform.
ENCAPSULATION_MODE
The encapsulation mode as given by the RFCs. This means
TRANSPORT or TUNNEL.
GROUP_DESCRIPTION
An optional (provides PFS if present) Diffie-Hellman
group description. The values are the same as those for
GROUP_DESCRIPTION in <ISAKMP-transform> sections shown
above.
Life List of lifetimes, each element is a <Lifetime> section
name.
TRANSFORM_ID
The transform ID as given by the RFCs.
<IPsec-ID> Parameters for IPsec ID configuration
Address
If the ID-type is IPV4_ADDR or IPV6_ADDR, this tag should
exist and be an IP address, an interface name, or the
default keyword. If an interface is used, the first ad-
dress of the appropriate family will be used. The default
keyword uses the interface associated with the default
route. In the case of IPv6, link-local addresses will be
skipped if addresses which are not link-local exist. If
the address on the interface changes isakmpd(8) will not
track the change. The configuration must be reloaded to
learn the new address.
ID-type
The ID type as given by the RFCs. For IPsec this is
currently IPV4_ADDR, IPV6_ADDR, IPV4_ADDR_SUBNET, or
IPV6_ADDR_SUBNET.
Netmask
If the ID-type is IPV4_ADDR_SUBNET or IPV6_ADDR_SUBNET,
this tag should exist and be a network subnet mask or an
interface. When an interface is specified, the netmask is
the mask associated with the Network. The default keyword
uses the interface associated with the default route.
Network
If the ID-type is IPV4_ADDR_SUBNET or IPV6_ADDR_SUBNET,
this tag should exist and be a network address, an inter-
face, or the default keyword. When an interface is speci-
fied, the network is selected as with the Address tag.
Port If the ID-type is IPV4_ADDR, IPV4_ADDR_SUBNET, IPV6_ADDR,
or IPV6_ADDR_SUBNET, this tag indicates what source or
destination port is allowed to be transported over the SA
(depending on whether this is a local or remote ID). If
left unspecified, all ports of the given transport proto-
col will be transmitted (or permitted) over the SA. The
Protocol tag must be specified in conjunction with this
tag.
Protocol
If the ID-type is IPV4_ADDR, IPV4_ADDR_SUBNET, IPV6_ADDR,
or IPV6_ADDR_SUBNET, this tag indicates what transport
protocol should be transmitted over the SA. If left un-
specified, all transport protocols between the two ad-
dress (ranges) will be sent (or permitted) over that SA.
<IKECFG-ID> Parameters to use with IKE mode-config. One ID per peer.
An IKECFG-ID is written as [<ID-type>/<name>]. The following ID
types are supported:
IPv4 [ipv4/A.B.C.D]
IPv6 [ipv6/abcd:abcd::ab:cd]
FQDN [fqdn/foo.bar.org]
UFQDN [ufqdn/user@foo.bar.org]
ASN1_DN [asn1_dn//C=aa/O=cc/...] (Note the double
slashes as the DN itself starts with a '/'.)
Each section specifies what configuration values to return to
the peer requesting IKE mode-config. Currently supported values
are:
Address The peer's network address.
Netmask The peer's netmask.
Nameserver The IP address of a DNS nameserver.
WINS-server The IP address of a WINS server.
<Initiator-ID> Parameters for peer initiator configuration
During phase 1 negotiation isakmpd(8) looks for a pre-shared
key in the <ISAKMP-peer> section. If no Authentication data is
specified in that section, and isakmpd(8) is not the initiator,
it looks for Authentication data in a section named after the
initiator's phase 1 ID. This allows mobile users with dynamic
IP addresses to have different shared secrets.
This only works for aggressive mode because in main mode the
remote initiator ID would not yet be known. Note, however, that
use of aggressive mode is discouraged. See CAVEATS, below.
The name of the <Initiator-ID> section depends on the ID type
sent by the initiator. Currently this can be:
IPv4 [A.B.C.D]
IPv6 [abcd:abcd::ab:cd]
FQDN [foo.bar.org]
UFQDN [user@foo.bar.org]
/etc/isakmpd/isakmpd.conf The default isakmpd(8) configuration file.
/usr/share/ipsec/isakmpd/ A directory containing some sample isakmpd(8)
configuration files.
An example of a configuration file:
# A configuration sample for the isakmpd ISAKMP/Oakley (aka IKE) daemon.
[General]
Listen-on= 10.1.0.2
# Incoming phase 1 negotiations are multiplexed on the source IP address
[Phase 1]
10.1.0.1= ISAKMP-peer-west
# These connections are walked over after config file parsing and told
# to the application layer so that it will inform us when traffic wants to
# pass over them. This means we can do on-demand keying.
[Phase 2]
Connections= IPsec-east-west
# Default values are commented out.
[ISAKMP-peer-west]
Phase= 1
#Transport= udp
Local-address= 10.1.0.2
Address= 10.1.0.1
#Port= isakmp
#Port= 500
#Configuration= Default-phase-1-configuration
Authentication= mekmitasdigoat
#Flags=
[IPsec-east-west]
Phase= 2
ISAKMP-peer= ISAKMP-peer-west
Configuration= Default-quick-mode
Local-ID= Net-east
Remote-ID= Net-west
#Flags=
[Net-west]
ID-type= IPV4_ADDR_SUBNET
Network= 192.168.1.0
Netmask= 255.255.255.0
[Net-east]
ID-type= IPV4_ADDR_SUBNET
Network= 192.168.2.0
Netmask= 255.255.255.0
# Quick mode descriptions
[Default-quick-mode]
EXCHANGE_TYPE= QUICK_MODE
Suites= QM-ESP-3DES-SHA-PFS-SUITE,QM-ESP-AES-SHA-PFS-SUITE
# Data for an IKE mode-config peer
[asn1_dn//C=SE/L=SomeCity/O=SomeCompany/CN=SomePeer.company.com]
Address= 192.168.1.123
Netmask= 255.255.255.0
Nameserver= 192.168.1.10
WINS-server= 192.168.1.11
# pre-shared key based on initiator's phase 1 ID
[foo.bar.org]
Authentication= mekmitasdigoat
#
# #####################################################################
# All configuration data below this point is not required as the example
# uses the predefined Main Mode transform and Quick Mode suite names.
# It is included here for completeness. Note the default values for the
# [General] and [X509-certificates] sections just below.
# #####################################################################
#
[General]
Policy-file= /etc/isakmpd/isakmpd.policy
Retransmits= 3
Exchange-max-time= 120
# KeyNote credential storage
[KeyNote]
Credential-directory= /etc/isakmpd/keynote/
# Certificates stored in PEM format
[X509-certificates]
CA-directory= /etc/isakmpd/ca/
Cert-directory= /etc/isakmpd/certs/
CRL-directory= /etc/isakmpd/crls/
Private-key= /etc/isakmpd/private/local.key
# Default phase 1 description (Main Mode)
[Default-phase-1-configuration]
EXCHANGE_TYPE= ID_PROT
Transforms= 3DES-SHA
# Main mode transforms
######################
# DES
[DES-MD5]
ENCRYPTION_ALGORITHM= DES_CBC
HASH_ALGORITHM= MD5
AUTHENTICATION_METHOD= PRE_SHARED
GROUP_DESCRIPTION= MODP_1024
Life= Default-phase-1-lifetime
[DES-SHA]
ENCRYPTION_ALGORITHM= DES_CBC
HASH_ALGORITHM= SHA
AUTHENTICATION_METHOD= PRE_SHARED
GROUP_DESCRIPTION= MODP_1024
Life= Default-phase-1-lifetime
# 3DES
[3DES-SHA]
ENCRYPTION_ALGORITHM= 3DES_CBC
HASH_ALGORITHM= SHA
AUTHENTICATION_METHOD= PRE_SHARED
GROUP_DESCRIPTION= MODP_1024
Life= Default-phase-1-lifetime
# Blowfish
[BLF-SHA]
ENCRYPTION_ALGORITHM= BLOWFISH_CBC
KEY_LENGTH= 128,96:192
HASH_ALGORITHM= SHA
AUTHENTICATION_METHOD= PRE_SHARED
GROUP_DESCRIPTION= MODP_1024
Life= Default-phase-1-lifetime
# Blowfish, using DH group 4 (non-default)
[BLF-SHA-EC185]
ENCRYPTION_ALGORITHM= BLOWFISH_CBC
KEY_LENGTH= 128,96:192
HASH_ALGORITHM= SHA
AUTHENTICATION_METHOD= PRE_SHARED
GROUP_DESCRIPTION= EC2N_185
Life= Default-phase-1-lifetime
# Quick mode protection suites
##############################
# DES
[QM-ESP-DES-SUITE]
Protocols= QM-ESP-DES
[QM-ESP-DES-PFS-SUITE]
Protocols= QM-ESP-DES-PFS
[QM-ESP-DES-MD5-SUITE]
Protocols= QM-ESP-DES-MD5
[QM-ESP-DES-MD5-PFS-SUITE]
Protocols= QM-ESP-DES-MD5-PFS
[QM-ESP-DES-SHA-SUITE]
Protocols= QM-ESP-DES-SHA
[QM-ESP-DES-SHA-PFS-SUITE]
Protocols= QM-ESP-DES-SHA-PFS
# 3DES
[QM-ESP-3DES-SHA-SUITE]
Protocols= QM-ESP-3DES-SHA
[QM-ESP-3DES-SHA-PFS-SUITE]
Protocols= QM-ESP-3DES-SHA-PFS
# AES
[QM-ESP-AES-SHA-SUITE]
Protocols= QM-ESP-AES-SHA
[QM-ESP-AES-SHA-PFS-SUITE]
Protocols= QM-ESP-AES-SHA-PFS
# AH
[QM-AH-MD5-SUITE]
Protocols= QM-AH-MD5
[QM-AH-MD5-PFS-SUITE]
Protocols= QM-AH-MD5-PFS
# AH + ESP (non-default)
[QM-AH-MD5-ESP-DES-SUITE]
Protocols= QM-AH-MD5,QM-ESP-DES
[QM-AH-MD5-ESP-DES-MD5-SUITE]
Protocols= QM-AH-MD5,QM-ESP-DES-MD5
[QM-ESP-DES-MD5-AH-MD5-SUITE]
Protocols= QM-ESP-DES-MD5,QM-AH-MD5
# Quick mode protocols
# DES
[QM-ESP-DES]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-DES-XF
[QM-ESP-DES-MD5]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-DES-MD5-XF
[QM-ESP-DES-MD5-PFS]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-DES-MD5-PFS-XF
[QM-ESP-DES-SHA]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-DES-SHA-XF
# 3DES
[QM-ESP-3DES-SHA]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-3DES-SHA-XF
[QM-ESP-3DES-SHA-PFS]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-3DES-SHA-PFS-XF
[QM-ESP-3DES-SHA-TRP]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-3DES-SHA-TRP-XF
# AES
[QM-ESP-AES-SHA]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-AES-SHA-XF
[QM-ESP-AES-SHA-PFS]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-AES-SHA-PFS-XF
[QM-ESP-AES-SHA-TRP]
PROTOCOL_ID= IPSEC_ESP
Transforms= QM-ESP-AES-SHA-TRP-XF
# AH MD5
[QM-AH-MD5]
PROTOCOL_ID= IPSEC_AH
Transforms= QM-AH-MD5-XF
[QM-AH-MD5-PFS]
PROTOCOL_ID= IPSEC_AH
Transforms= QM-AH-MD5-PFS-XF
# Quick mode transforms
# ESP DES+MD5
[QM-ESP-DES-XF]
TRANSFORM_ID= DES
ENCAPSULATION_MODE= TUNNEL
Life= Default-phase-2-lifetime
[QM-ESP-DES-MD5-XF]
TRANSFORM_ID= DES
ENCAPSULATION_MODE= TUNNEL
AUTHENTICATION_ALGORITHM= HMAC_MD5
Life= Default-phase-2-lifetime
[QM-ESP-DES-MD5-PFS-XF]
TRANSFORM_ID= DES
ENCAPSULATION_MODE= TUNNEL
GROUP_DESCRIPTION= MODP_1024
AUTHENTICATION_ALGORITHM= HMAC_MD5
Life= Default-phase-2-lifetime
[QM-ESP-DES-SHA-XF]
TRANSFORM_ID= DES
ENCAPSULATION_MODE= TUNNEL
AUTHENTICATION_ALGORITHM= HMAC_SHA
Life= Default-phase-2-lifetime
# 3DES
[QM-ESP-3DES-SHA-XF]
TRANSFORM_ID= 3DES
ENCAPSULATION_MODE= TUNNEL
AUTHENTICATION_ALGORITHM= HMAC_SHA
Life= Default-phase-2-lifetime
[QM-ESP-3DES-SHA-PFS-XF]
TRANSFORM_ID= 3DES
ENCAPSULATION_MODE= TUNNEL
AUTHENTICATION_ALGORITHM= HMAC_SHA
GROUP_DESCRIPTION= MODP_1024
Life= Default-phase-2-lifetime
[QM-ESP-3DES-SHA-TRP-XF]
TRANSFORM_ID= 3DES
ENCAPSULATION_MODE= TRANSPORT
AUTHENTICATION_ALGORITHM= HMAC_SHA
Life= Default-phase-2-lifetime
# AES
[QM-ESP-AES-SHA-XF]
TRANSFORM_ID= AES
ENCAPSULATION_MODE= TUNNEL
AUTHENTICATION_ALGORITHM= HMAC_SHA
Life= Default-phase-2-lifetime
[QM-ESP-AES-SHA-PFS-XF]
TRANSFORM_ID= AES
ENCAPSULATION_MODE= TUNNEL
AUTHENTICATION_ALGORITHM= HMAC_SHA
GROUP_DESCRIPTION= MODP_1024
Life= Default-phase-2-lifetime
[QM-ESP-AES-SHA-TRP-XF]
TRANSFORM_ID= AES
ENCAPSULATION_MODE= TRANSPORT
AUTHENTICATION_ALGORITHM= HMAC_SHA
Life= Default-phase-2-lifetime
# AH
[QM-AH-MD5-XF]
TRANSFORM_ID= MD5
ENCAPSULATION_MODE= TUNNEL
AUTHENTICATION_ALGORITHM= HMAC_MD5
Life= Default-phase-2-lifetime
[QM-AH-MD5-PFS-XF]
TRANSFORM_ID= MD5
ENCAPSULATION_MODE= TUNNEL
GROUP_DESCRIPTION= MODP_1024
Life= Default-phase-2-lifetime
[Sample-Life-Time]
LIFE_TYPE= SECONDS
LIFE_DURATION= 3600,1800:7200
[Sample-Life-Volume]
LIFE_TYPE= KILOBYTES
LIFE_DURATION= 1000,768:1536
keynote(1), openssl(1), ipsec(4), keynote(4), isakmpd.policy(5),
isakmpd(8), vpn(8)
Using aggressive mode is discouraged due to various design problems. If
your peer only supports aggressive mode, please consider replacing that
peer with a sane ISAKMP/IKE implementation. For details see
http://www.usenix.org/publications/login/1999-12/features/harmful.html.
The RFCs do not permit differing DH groups in the same proposal for ag-
gressive and quick mode exchanges. Mixing both PFS and non-PFS suites in
a quick mode proposal is not possible, as PFS implies using a DH group.
MirBSD #10-current August 07, 2002 14