STGE(4) BSD Programmer's Manual STGE(4)
stge - Sundance/Tamarack TC9021 Gigabit Ethernet driver
stge* at pci? dev ? function ?
Configuration of PHYs or Ten-bit interfaces may also be necessary. See
mii(4).
The stge device driver supports the Sundance/Tamarack TC9021 Gigabit Eth-
ernet chip.
The Sundance/Tamarack TC9021 is found on the D-Link DGE-550T, and the An-
tares Microsystems Gigabit Ethernet board. It uses an external PHY or an
external 10-bit interface.
arp(4), eephy(4), ifmedia(4), intro(4), mii(4), netintro(4), pci(4),
vlan(4), hostname.if(5), ifconfig(8)
The stge driver first appeared in OpenBSD 3.1.
The stge driver was written by Jason R. Thorpe <thorpej@netbsd.org>.
The stge driver does not support the VLAN tag insertion/removal feature
of the TC9021 chip. This is primarily because the TC9021's VLAN do not
have a useful programming interface.
The stge driver does not yet support jumbo Ethernet frames.
MirOS BSD #10-current July 24, 2001 1
Generated on 2013-04-27 00:20:00 by $MirOS: src/scripts/roff2htm,v 1.77 2013/01/01 20:49:09 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002‒2013 The MirOS Project, Germany.
This product includes material
provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.