MirBSD manpage: isp(4)

ISP(4)                     BSD Programmer's Manual                      ISP(4)


     isp - Qlogic based SCSI or FibreChannel SCSI Host Adapters


     isp* at pci? dev ? function ? (PCI)
     isp* at sbus? slot ? offset ? (SBus)
     scsibus* at isp?
     option ISP_COMPILE_FW


     This driver provides access to a SCSI bus or a FibreChannel connected to
     Qlogic ISP1000 (SBus), ISP1020 (PCI), ISP1040(PCI), ISP1080(PCI),
     ISP12160(PCI) SCSI host adapters or ISP2100(PCI), ISP2200(PCI)
     FibreChannel or ISP2300(PCI) 2-Gigabit FibreChannel host adapters.

     Features include support for UltraSCSI and wide mode transactions for
     SCSI, and Ultra2 LVD (for the ISP1080) and Ultra3 LVD (for the ISP12160)
     and the FCP SCSI (private loop, public loop or fabric) for FibreChannel.
     Command tagging is supported for all (in fact, FibreChannel requires tag-


     Adding option ISP_COMPILE_FW=1 to the kernel configuration file ensures
     that known good firmware will be downloaded to the driver at attach time.
     This is the default setting on sparc and sparc64 platforms, and is also
     recommended on platforms where the card's bios may not be initialized
     upon power-up.


     cd(4), ch(4), intro(4), pci(4), sbus(4), scsi(4), sd(4), ses(4), ss(4),
     st(4), uk(4)


     The isp driver was written by Matthew Jacob for NASA/Ames Research

MirBSD #10-current               May 16, 2002                                1

Generated on 2021-12-07 11:07:08 by $MirOS: src/scripts/roff2htm,v 1.103 2021/01/23 20:24:35 tg Exp $ — This product includes material provided by mirabilos.

These manual pages and other documentation are copyrighted by their respective writers; their sources are available at the project’s CVSweb, AnonCVS and other mirrors. The rest is Copyright © 2002–2021 MirBSD.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report — diffs preferred.