MirBSD manpage: Pod::Text(3p)

Pod::Text(3p)   Perl Programmers Reference Guide    Pod::Text(3p)


     Pod::Text - Convert POD data to formatted ASCII text


         use Pod::Text;
         my $parser = Pod::Text->new (sentence => 0, width => 78);

         # Read POD from STDIN and write to STDOUT.

         # Read POD from file.pod and write to file.txt.
         $parser->parse_from_file ('file.pod', 'file.txt');


     Pod::Text is a module that can convert documentation in the
     POD format (the preferred language for documenting Perl)
     into formatted ASCII.  It uses no special formatting con-
     trols or codes whatsoever, and its output is therefore suit-
     able for nearly any device.

     As a derived class from Pod::Parser, Pod::Text supports the
     same methods and interfaces.  See Pod::Parser for all the
     details; briefly, one creates a new parser with
     "Pod::Text->new()" and then calls either
     parse_from_filehandle() or parse_from_file().

     new() can take options, in the form of key/value pairs, that
     control the behavior of the parser.  The currently recog-
     nized options are:

     alt If set to a true value, selects an alternate output for-
         mat that, among other things, uses a different heading
         style and marks "=item" entries with a colon in the left
         margin.  Defaults to false.

         If set to a true value, the non-POD parts of the input
         file will be included in the output.  Useful for viewing
         code documented with POD blocks with the POD rendered
         and the code left intact.

         The number of spaces to indent regular text, and the
         default indentation for "=over" blocks.  Defaults to 4.

         If set to a true value, a blank line is printed after a
         "=head1" heading. If set to false (the default), no
         blank line is printed after "=head1", although one is
         still printed after "=head2".  This is the default
         because it's the expected formatting for manual pages;
         if you're formatting arbitrary text documents, setting

perl v5.8.8                2005-02-05                           1

Pod::Text(3p)   Perl Programmers Reference Guide    Pod::Text(3p)

         this to true may result in more pleasing output.

         The width of the left margin in spaces.  Defaults to 0.
         This is the margin for all text, including headings, not
         the amount by which regular text is indented; for the
         latter, see the indent option.  To set the right margin,
         see the width option.

         Sets the quote marks used to surround C<> text.  If the
         value is a single character, it is used as both the left
         and right quote; if it is two characters, the first
         character is used as the left quote and the second as
         the right quoted; and if it is four characters, the
         first two are used as the left quote and the second two
         as the right quote.

         This may also be set to the special value "none", in
         which case no quote marks are added around C<> text.

         If set to a true value, Pod::Text will assume that each
         sentence ends in two spaces, and will try to preserve
         that spacing.  If set to false, all consecutive whi-
         tespace in non-verbatim paragraphs is compressed into a
         single space.  Defaults to true.

         The column at which to wrap text on the right-hand side.
         Defaults to 76.

     The standard Pod::Parser method parse_from_filehandle()
     takes up to two arguments, the first being the file handle
     to read POD from and the second being the file handle to
     write the formatted output to.  The first defaults to STDIN
     if not given, and the second defaults to STDOUT.  The method
     parse_from_file() is almost identical, except that its two
     arguments are the input and output disk files instead.  See
     Pod::Parser for the specific details.


     Bizarre space in item
     Item called without tag
         (W) Something has gone wrong in internal "=item" pro-
         cessing.  These messages indicate a bug in Pod::Text;
         you should never see them.

     Can't open %s for reading: %s
         (F) Pod::Text was invoked via the compatibility mode
         pod2text() interface and the input file it was given
         could not be opened.

perl v5.8.8                2005-02-05                           2

Pod::Text(3p)   Perl Programmers Reference Guide    Pod::Text(3p)

     Invalid quote specification "%s"
         (F) The quote specification given (the quotes option to
         the constructor) was invalid.  A quote specification
         must be one, two, or four characters long.

     %s:%d: Unknown command paragraph: %s
         (W) The POD source contained a non-standard command
         paragraph (something of the form "=command args") that
         Pod::Man didn't know about.  It was ignored.

     %s:%d: Unknown escape: %s
         (W) The POD source contained an "E<>" escape that
         Pod::Text didn't know about.

     %s:%d: Unknown formatting code: %s
         (W) The POD source contained a non-standard formatting
         code (something of the form "X<>") that Pod::Text didn't
         know about.

     %s:%d: Unmatched =back
         (W) Pod::Text encountered a "=back" command that didn't
         correspond to an "=over" command.


     Embedded Ctrl-As (octal 001) in the input will be mapped to
     spaces on output, due to an internal implementation detail.


     This is a replacement for an earlier Pod::Text module writ-
     ten by Tom Christiansen.  It has a revamped interface, since
     it now uses Pod::Parser, but an interface roughly compatible
     with the old Pod::Text::pod2text() function is still avail-
     able.  Please change to the new calling convention, though.

     The original Pod::Text contained code to do formatting via
     termcap sequences, although it wasn't turned on by default
     and it was problematic to get it to work at all.  This
     rewrite doesn't even try to do that, but a subclass of it
     does.  Look for Pod::Text::Termcap.


     Pod::Parser, Pod::Text::Termcap, pod2text(1)

     The current version of this module is always available from
     its web site at
     <http://www.eyrie.org/~eagle/software/podlators/>.  It is
     also part of the Perl core distribution as of 5.6.0.


     Russ Allbery <rra@stanford.edu>, based very heavily on the
     original Pod::Text by Tom Christiansen
     <tchrist@mox.perl.com> and its conversion to Pod::Parser by

perl v5.8.8                2005-02-05                           3

Pod::Text(3p)   Perl Programmers Reference Guide    Pod::Text(3p)

     Brad Appleton <bradapp@enteract.com>.


     Copyright 1999, 2000, 2001, 2002 by Russ Allbery

     This program is free software; you may redistribute it
     and/or modify it under the same terms as Perl itself.

perl v5.8.8                2005-02-05                           4

Generated on 2022-12-24 01:00:14 by $MirOS: src/scripts/roff2htm,v 1.113 2022/12/21 23:14:31 tg Exp $ — This product includes material provided by mirabilos.

These manual pages and other documentation are copyrighted by their respective writers; their sources are available at the project’s CVSweb, AnonCVS and other mirrors. The rest is Copyright © 2002–2022 MirBSD.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report — diffs preferred.

Kontakt / Impressum & Datenschutzerklärung