MirBSD manpage: uucplock(3), uu_lock(3), uu_lockerr(3), uu_lock_txfr(3), uu_unlock(3)

UUCPLOCK(3)                BSD Programmer's Manual                 UUCPLOCK(3)


     uu_lock, uu_unlock, uu_lockerr - acquire and release control of a serial


     #include <sys/types.h>
     #include <util.h>

     uu_lock(const char *ttyname);

     uu_lock_txfr(const char *ttyname, pid_t pid);

     uu_unlock(const char *ttyname);

     const char *
     uu_lockerr(int uu_lockresult);


     The uu_lock() function attempts to create a lock file called
     /var/spool/lock/LCK.. with a suffix given by the passed ttyname. If the
     file already exists, it is expected to contain the process ID of the
     locking program.

     If the file does not already exist, or the owning process given by the
     process ID found in the lock file is no longer running, uu_lock() will
     write its own process ID into the file and return success.

     uu_lock_txfr() transfers lock ownership to another process. uu_lock()
     must have previously been successful.

     uu_unlock() removes the lockfile created by uu_lock() for the given
     ttyname. Care should be taken that uu_lock() was successful before cal-
     ling uu_unlock().

     uu_lockerr() returns an error string representing the error
     uu_lockresult, as returned from uu_lock().


     uu_unlock() returns 0 on success and -1 on failure.

     uu_lock() may return any of the following values:

     UU_LOCK_INUSE: The lock is in use by another process.

     UU_LOCK_OK: The lock was successfully created.

     UU_LOCK_OPEN_ERR: The lock file could not be opened via open(2).

     UU_LOCK_READ_ERR: The lock file could not be read via read(2).

     UU_LOCK_CREAT_ERR: Can't create temporary lock file via creat(3).

     UU_LOCK_WRITE_ERR: The current process ID could not be written to the
     lock file via a call to write(2).

     UU_LOCK_LINK_ERR: Can't link temporary lock file via link(2).

     UU_LOCK_TRY_ERR: Locking attempts are failed after 5 tries.

     If a value of UU_LOCK_OK is passed to uu_lockerr(), an empty string is
     returned. Otherwise, a string specifying the reason for failure is re-
     turned. uu_lockerr() uses the current value of errno to determine the ex-
     act error. Care should be made not to allow errno to be changed between
     calls to uu_lock() and uu_lockerr().

     uu_lock_txfr() may return any of the following values:

     UU_LOCK_OK: The transfer was successful. The specified process now holds
     the device lock.

     UU_LOCK_OWNER_ERR: The current process does not already own a lock on the
     specified device.

     UU_LOCK_WRITE_ERR: The new process ID could not be written to the lock
     file via a call to write(2).


     If uu_lock() returns one of the error values above, the global value
     errno can be used to determine the cause. Refer to the respective manual
     pages for further details.

     uu_unlock() will set the global variable errno to reflect the reason that
     the lock file could not be removed. Refer to the description of unlink(2)
     for further details.


     lseek(2), open(2), read(2), write(2)


     It is possible that a stale lock is not recognised as such if a new pro-
     cess is assigned the same process ID as the program that left the stale

     The calling process must have write permissions to the /var/spool/lock
     directory. There is no mechanism in place to ensure that the permissions
     of this directory are the same as those of the serial devices that might
     be locked.

MirBSD #10-current              March 30, 1997                               1

Generated on 2022-12-24 01:00:14 by $MirOS: src/scripts/roff2htm,v 1.113 2022/12/21 23:14:31 tg Exp $ — This product includes material provided by mirabilos.

These manual pages and other documentation are copyrighted by their respective writers; their sources are available at the project’s CVSweb, AnonCVS and other mirrors. The rest is Copyright © 2002–2022 MirBSD.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report — diffs preferred.

Kontakt / Impressum & Datenschutzerklärung