MirBSD manpage: BIO_append_filename(3), BIO_get_fp(3), BIO_new_file(3), BIO_new_fp(3), BIO_read_filename(3), BIO_rw_filename(3), BIO_set_fp(3), BIO_s_file(3), BIO_write_filename(3)

BIO_S_FILE(3)                OpenSSL                BIO_S_FILE(3)


     BIO_s_file, BIO_new_file, BIO_new_fp, BIO_set_fp,
     BIO_get_fp, BIO_read_filename, BIO_write_filename,
     BIO_append_filename, BIO_rw_filename - FILE bio


      #include <openssl/bio.h>

      BIO_METHOD *   BIO_s_file(void);
      BIO *BIO_new_file(const char *filename, const char *mode);
      BIO *BIO_new_fp(FILE *stream, int flags);

      BIO_set_fp(BIO *b,FILE *fp, int flags);
      BIO_get_fp(BIO *b,FILE **fpp);

      int BIO_read_filename(BIO *b, char *name)
      int BIO_write_filename(BIO *b, char *name)
      int BIO_append_filename(BIO *b, char *name)
      int BIO_rw_filename(BIO *b, char *name)


     BIO_s_file() returns the BIO file method. As its name
     implies it is a wrapper round the stdio FILE structure and
     it is a source/sink BIO.

     Calls to BIO_read() and BIO_write() read and write data to
     the underlying stream. BIO_gets() and BIO_puts() are sup-
     ported on file BIOs.

     BIO_flush() on a file BIO calls the fflush() function on the
     wrapped stream.

     BIO_reset() attempts to change the file pointer to the start
     of file using fseek(stream, 0, 0).

     BIO_seek() sets the file pointer to position ofs from start
     of file using fseek(stream, ofs, 0).

     BIO_eof() calls feof().

     Setting the BIO_CLOSE flag calls fclose() on the stream when
     the BIO is freed.

     BIO_new_file() creates a new file BIO with mode mode the
     meaning of mode is the same as the stdio function fopen().
     The BIO_CLOSE flag is set on the returned BIO.

     BIO_new_fp() creates a file BIO wrapping stream. Flags can
     be: BIO_CLOSE, BIO_NOCLOSE (the close flag) BIO_FP_TEXT
     (sets the underlying stream to text mode, default is binary:
     this only has any effect under Win32).

MirBSD #10-current         2005-02-05                           1

BIO_S_FILE(3)                OpenSSL                BIO_S_FILE(3)

     BIO_set_fp() set the fp of a file BIO to fp. flags has the
     same meaning as in BIO_new_fp(), it is a macro.

     BIO_get_fp() retrieves the fp of a file BIO, it is a macro.

     BIO_seek() is a macro that sets the position pointer to
     offset bytes from the start of file.

     BIO_tell() returns the value of the position pointer.

     BIO_read_filename(), BIO_write_filename(),
     BIO_append_filename() and BIO_rw_filename() set the file BIO
     b to use file name for reading, writing, append or read
     write respectively.


     When wrapping stdout, stdin or stderr the underlying stream
     should not normally be closed so the BIO_NOCLOSE flag should
     be set.

     Because the file BIO calls the underlying stdio functions
     any quirks in stdio behaviour will be mirrored by the
     corresponding BIO.


     File BIO "hello world":

      BIO *bio_out;
      bio_out = BIO_new_fp(stdout, BIO_NOCLOSE);
      BIO_printf(bio_out, "Hello World\n");

     Alternative technique:

      BIO *bio_out;
      bio_out = BIO_new(BIO_s_file());
      if(bio_out == NULL) /* Error ... */
      if(!BIO_set_fp(bio_out, stdout, BIO_NOCLOSE)) /* Error ... */
      BIO_printf(bio_out, "Hello World\n");

     Write to a file:

      BIO *out;
      out = BIO_new_file("filename.txt", "w");
      if(!out) /* Error occurred */
      BIO_printf(out, "Hello World\n");

     Alternative technique:

MirBSD #10-current         2005-02-05                           2

BIO_S_FILE(3)                OpenSSL                BIO_S_FILE(3)

      BIO *out;
      out = BIO_new(BIO_s_file());
      if(out == NULL) /* Error ... */
      if(!BIO_write_filename(out, "filename.txt")) /* Error ... */
      BIO_printf(out, "Hello World\n");


     BIO_s_file() returns the file BIO method.

     BIO_new_file() and BIO_new_fp() return a file BIO or NULL if
     an error occurred.

     BIO_set_fp() and BIO_get_fp() return 1 for success or 0 for
     failure (although the current implementation never return

     BIO_seek() returns the same value as the underlying fseek()
     function: 0 for success or -1 for failure.

     BIO_tell() returns the current file position.

     BIO_read_filename(), BIO_write_filename(),
     BIO_append_filename() and BIO_rw_filename() return 1 for
     success or 0 for failure.


     BIO_reset() and BIO_seek() are implemented using fseek() on
     the underlying stream. The return value for fseek() is 0 for
     success or -1 if an error occurred this differs from other
     types of BIO which will typically return 1 for success and a
     non positive value if an error occurred.


     BIO_seek(3), BIO_tell(3), BIO_reset(3), BIO_flush(3),
     BIO_read(3), BIO_write(3), BIO_puts(3), BIO_gets(3),
     BIO_printf(3), BIO_set_close(3), BIO_get_close(3)

MirBSD #10-current         2005-02-05                           3

Generated on 2022-12-24 01:00:14 by $MirOS: src/scripts/roff2htm,v 1.113 2022/12/21 23:14:31 tg Exp $ — This product includes material provided by mirabilos.

These manual pages and other documentation are copyrighted by their respective writers; their sources are available at the project’s CVSweb, AnonCVS and other mirrors. The rest is Copyright © 2002–2022 MirBSD.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report — diffs preferred.

Kontakt / Impressum & Datenschutzerklärung