WAIT(2) BSD Programmer's Manual WAIT(2)
wait, waitpid, wait4, wait3 - wait for process termination
#include <sys/types.h> #include <sys/wait.h> pid_t wait(int *status); pid_t waitpid(pid_t wpid, int *status, int options); #include <sys/time.h> #include <sys/resource.h> pid_t wait3(int *status, int options, struct rusage *rusage); pid_t wait4(pid_t wpid, int *status, int options, struct rusage *rusage);
The wait() function suspends execution of its calling process until status information is available for a terminated child process, or a sig- nal is received. On return from a successful wait() call, the status area, if non-zero, is filled in with termination information about the process that exited (see below). The wait4() call provides a more general interface for programs that need to wait for certain child processes, that need resource utilization statistics accumulated by child processes, or that require options. The other wait functions are implemented using wait4(). The wpid parameter specifies the set of child processes for which to wait. The following symbolic constants are currently defined in <sys/wait.h>: #define WAIT_ANY (-1) /* any process */ #define WAIT_MYPGRP 0 /* any process in my process group */ If wpid is set to WAIT_ANY, the call waits for any child process. If wpid is set to WAIT_MYPGRP, the call waits for any child process in the pro- cess group of the caller. If wpid is greater than zero, the call waits for the process with process ID wpid. If wpid is less than -1, the call waits for any process whose process group ID equals the absolute value of wpid. The status parameter is defined below. The options parameter contains the bitwise OR of any of the following options: WCONTINUED Causes status to be reported for stopped child processes that have been continued by receipt of a SIGCONT signal. WNOHANG Indicates that the call should not block if there are no processes that wish to report status. WUNTRACED If set, children of the current process that are stopped due to a SIGTTIN, SIGTTOU, SIGTSTP, or SIGSTOP signal also have their status reported. If rusage is non-zero, a summary of the resources used by the terminated process and all its children is returned (this information is currently not available for stopped processes). When the WNOHANG option is specified and no processes wish to report status, wait4() returns a process ID of 0. The waitpid() call is identical to wait4() with an rusage value of zero. The older wait3() call is the same as wait4() with a wpid value of -1. The following macros may be used to test the manner of exit of the pro- cess. One of the first three macros will evaluate to a non-zero (true) value: WIFCONTINUED(status) True if the process has not terminated, and has continued after a job control stop. This macro can be true only if the wait call specified the WCONTINUED option). WIFEXITED(status) True if the process terminated normally by a call to _exit(2) or exit(3). WIFSIGNALED(status) True if the process terminated due to receipt of a signal. WIFSTOPPED(status) True if the process has not terminated, but has stopped and can be restarted. This macro can be true only if the wait call speci- fied the WUNTRACED option or if the child process is being traced (see ptrace(2)). Depending on the values of those macros, the following macros produce the remaining status information about the child process: WEXITSTATUS(status) If WIFEXITED(status) is true, evaluates to the low-order 8 bits of the argument passed to _exit(2) or exit(3) by the child. WTERMSIG(status) If WIFSIGNALED(status) is true, evaluates to the number of the signal that caused the termination of the process. WCOREDUMP(status) If WIFSIGNALED(status) is true, evaluates as true if the termina- tion of the process was accompanied by the creation of a core file containing an image of the process when the signal was re- ceived. WSTOPSIG(status) If WIFSTOPPED(status) is true, evaluates to the number of the signal that caused the process to stop.
See sigaction(2) for a list of termination signals. A status of 0 indi- cates normal termination. If a parent process terminates without waiting for all of its child processes to terminate, the remaining child processes are assigned the parent process 1 ID (the init process ID). If a signal is caught while any of the wait() calls is pending, the call may be interrupted or restarted when the signal-catching routine returns, depending on the options in effect for the signal; for further informa- tion, see siginterrupt(3).
If wait() returns due to a stopped or terminated child process, the pro- cess ID of the child is returned to the calling process. Otherwise, a value of -1 is returned and errno is set to indicate the error. If wait4(), wait3() or waitpid() returns due to a stopped or terminated child process, the process ID of the child is returned to the calling process. If there are no children not previously awaited, -1 is returned with errno set to [ECHILD]. Otherwise, if WNOHANG is specified and there are no stopped or exited children, 0 is returned. If an error is detected or a caught signal aborts the call, a value of -1 is returned and errno is set to indicate the error.
wait() will fail and return immediately if: [ECHILD] The calling process has no existing unwaited-for child processes. [EFAULT] The status or rusage arguments point to an illegal address. (May not be detected before exit of a child process.) [EINTR] The call was interrupted by a caught signal, or the signal did not have the SA_RESTART flag set. [EINVAL] Invalid or undefined flags were passed in the options argu- ment.
_exit(2), sigaction(2), exit(3)
The wait() and waitpid() functions are defined by POSIX; wait4() and wait3() are not specified by POSIX. The WCOREDUMP() macro and the ability to restart a pending wait() call are extensions to the POSIX interface.
A wait() function call appeared in Version 2 AT&T UNIX. MirOS BSD #10-current April 19, 1994 2
Generated on 2015-04-13 10:26:13 by $MirOS: src/scripts/roff2htm,v 1.80 2015/01/02 13:54:19 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002–2015 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.