MirOS Manual: pread(2), preadv(2), read(2), readv(2)

READ(2)                    BSD Programmer's Manual                     READ(2)

NAME

     read, readv, pread, preadv - read input

SYNOPSIS

     #include <sys/types.h>
     #include <unistd.h>

     ssize_t
     read(int d, void *buf, size_t nbytes);

     ssize_t
     pread(int d, void *buf, size_t nbytes, off_t offset);

     #include <sys/types.h>
     #include <sys/uio.h>
     #include <unistd.h>

     ssize_t
     readv(int d, const struct iovec *iov, int iovcnt);

     ssize_t
     preadv(int d, const struct iovec *iov, int iovcnt, off_t offset);

DESCRIPTION

     read() attempts to read nbytes of data from the object referenced by the
     descriptor d into the buffer pointed to by buf. readv() performs the same
     action, but scatters the input data into the iovcnt buffers specified by
     the members of the iov array: iov[0], iov[1], ..., iov[iovcnt-1]. pread()
     and preadv() perform the same functions, but read from the specified po-
     sition in the file without modifying the file pointer.

     For readv() and preadv(), the iovec structure is defined as:

           struct iovec {
                   void *iov_base;
                   size_t iov_len;
           };

     Each iovec entry specifies the base address and length of an area in
     memory where data should be placed. readv() will always fill an area com-
     pletely before proceeding to the next.

     On objects capable of seeking, the read() starts at a position given by
     the pointer associated with d (see lseek(2)). Upon return from read(),
     the pointer is incremented by the number of bytes actually read.

     Objects that are not capable of seeking always read from the current po-
     sition. The value of the pointer associated with such an object is unde-
     fined.

     Upon successful completion, read(), readv(), pread(), and preadv() return
     the number of bytes actually read and placed in the buffer. The system
     guarantees to read the number of bytes requested if the descriptor refer-
     ences a normal file that has that many bytes left before the end-of-file,
     but in no other case.

     Note that readv() and preadv() will fail if the value of iovcnt exceeds
     the constant IOV_MAX.

RETURN VALUES

     If successful, the number of bytes actually read is returned. Upon read-
     ing end-of-file, zero is returned. Otherwise, a -1 is returned and the
     global variable errno is set to indicate the error.

ERRORS

     read(), readv(), pread(), and preadv() will succeed unless:

     [EBADF]       d is not a valid file or socket descriptor open for read-
                   ing.

     [EFAULT]      buf points outside the allocated address space.

     [EIO]         An I/O error occurred while reading from the file system,
                   or the process is a member of a background process attempt-
                   ing to read from its controlling terminal, the process is
                   ignoring or blocking the SIGTTIN signal or the process
                   group is orphaned.

     [EINTR]       A read from a slow device was interrupted before any data
                   arrived by the delivery of a signal.

     [EINVAL]      The pointer associated with d was negative.

     [EAGAIN]      The file was marked for non-blocking I/O, and no data were
                   ready to be read.

     In addition, read() and pread() may return the following error:

     [EINVAL]      nbytes was larger than SSIZE_MAX.

     Also, readv() and preadv() may return one of the following errors:

     [EINVAL]      iovcnt was less than or equal to 0, or greater than
                   IOV_MAX.

     [EINVAL]      The sum of the iov_len values in the iov array overflowed
                   an ssize_t.

     [EFAULT]      Part of the iov points outside the process's allocated ad-
                   dress space.

SEE ALSO

     dup(2), fcntl(2), open(2), pipe(2), poll(2), select(2), socket(2),
     socketpair(2)

STANDARDS

     The read() function conforms to IEEE Std 1003.1-1990 ("POSIX"). The
     readv() and pread() functions conform to X/Open Portability Guide Issue
     4.2 ("XPG4.2").

HISTORY

     The preadv() function first appeared in OpenBSD 2.7. The pread() function
     appeared in AT&TNon-Null System V.4 UNIX. The readv() function call ap-
     peared in 4.2BSD. The read() function call appeared in Version 2 AT&T
     UNIX.

CAVEATS

     Error checks should explicitly test for -1. Code such as

             while ((nr = read(fd, buf, sizeof(buf))) > 0)

     is not maximally portable, as some platforms allow for nbytes to range
     between SSIZE_MAX and SIZE_MAX - 2, in which case the return value of an
     error-free read() may appear as a negative number distinct from -1. Prop-
     er loops should use

             while ((nr = read(fd, buf, sizeof(buf))) != -1 && nr != 0)

MirOS BSD #10-current           July 28, 1998                                1

Generated on 2014-07-04 21:17:45 by $MirOS: src/scripts/roff2htm,v 1.79 2014/02/10 00:36:11 tg Exp $

These manual pages and other documentation are copyrighted by their respective writers; their source is available at our CVSweb, AnonCVS, and other mirrors. The rest is Copyright © 2002‒2014 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.