TR(1) BSD Reference Manual TR(1)
tr - translate characters
tr [-cs] string1 string2 tr [-c] -d string1 tr [-c] -s string1 tr [-c] -ds string1 string2
The tr utility copies the standard input to the standard output with sub- stitution or deletion of selected characters. The options are as follows: -c Complements the set of characters in string1; for instance, "-c ab" includes every character except for "a" and "b". -d The -d option causes characters to be deleted from the input. -s The -s option squeezes multiple occurrences of the characters listed in the last operand (either string1 or string2) in the in- put into a single instance of the character. This occurs after all deletion and translation is completed. In the first synopsis form, the characters in string1 are translated into the characters in string2 where the first character in string1 is translated into the first character in string2 and so on. If string1 is longer than string2, the last character found in string2 is duplicated until string1 is exhausted. In the second synopsis form, the characters in string1 are deleted from the input. In the third synopsis form, the characters in string1 are compressed as described for the -s option. In the fourth synopsis form, the characters in string1 are deleted from the input, and the characters in string2 are compressed as described for the -s option. The following conventions can be used in string1 and string2 to specify sets of characters: character Any character not described by one of the following conven- tions represents itself. \octal A backslash followed by 1, 2, or 3 octal digits represents a character with that encoded value. To follow an octal sequence with a digit as a character, left zero-pad the octal sequence to the full 3 octal digits. \character A backslash followed by certain special characters maps to special values. \a <alert character> \b <backspace> \f <form-feed> \n <newline> \r <carriage return> \t <tab> \v <vertical tab> A backslash followed by any other character maps to that char- acter. c-c Represents the range of characters between the range end- points, inclusively. [:class:] Represents all characters belonging to the defined character class. Class names are: alnum <alphanumeric characters> alpha <alphabetic characters> blank <blank characters> cntrl <control characters> digit <numeric characters> graph <graphic characters> lower <lower-case alphabetic characters> print <printable characters> punct <punctuation characters> space <space characters> upper <upper-case characters> xdigit <hexadecimal characters> Characters in the classes are in unspecified order. In this implementation, they are usually in Unicode ascending order. For specific information as to which ASCII or multibyte char- acters are included in these classes, see wctype(3) and relat- ed manual pages. [=equiv=] Represents all characters or collating (sorting) elements be- longing to the same equivalence class as equiv. If there is a secondary ordering within the equivalence class, the charac- ters are ordered in ascending sequence. Otherwise, they are ordered after their encoded values. An example of an equivalence class might be "c" and "ch" in Spanish; English has no equivalence classes. [#*n] Represents n repeated occurrences of the character represented by #. This expression is only valid when it occurs in string2. If n is omitted or is zero, it is be interpreted as large enough to extend string2 sequence to the length of string1. If n has a leading zero, it is interpreted as an octal value; otherwise, it's interpreted as a decimal value. The tr utility exits 0 on success or >0 if an error occurred.
The following examples are shown as given to the shell: Create a list of the words in file1, one per line, where a word is taken to be a maximal string of letters. $ tr -cs [:alpha:]" "\n" < file1" Translate the contents of file1 to upper-case. $ tr [:lower:]" "[:upper:]" < file1" Strip out non-printable characters from file1. $ tr -cd [:print:]" < file1"
System V has historically implemented character ranges using the syntax "[c-c]" instead of the "c-c" used by historic BSD implementations and standardised by POSIX. System V shell scripts should work under this im- plementation as long as the range is intended to map in another range, i.e., the command "tr [a-z] [A-Z]" will work as it will map the "[" char- acter in string1 to the "[" character in string2. However, if the shell script is deleting or squeezing characters as in the command "tr -d [a- z]", the characters "[" and ""] will be included in the deletion or compression list, which would not have happened under an historic System V implementation. Additionally, any scripts that depended on the sequence "a-z" to represent the three characters "a", "-", and "z" will have to be rewritten as "a\-z". The tr utility has historically not permitted the manipulation of NUL bytes in its input and, additionally, has stripped NUL's from its input stream. This implementation has removed this behavior as a bug. The tr utility has historically been extremely forgiving of syntax er- rors: for example, the -c and -s options were ignored unless two strings were specified. This implementation will not permit illegal syntax. The tr utility is expected to be IEEE Std 1003.2 ("POSIX.2") compatible. It should be noted that the feature wherein the last character of string2 is duplicated if string2 has less characters than string1 is permitted by POSIX but is not required. Shell scripts attempting to be portable to other POSIX systems should use the "[#*]" convention instead of relying on this behavior. MirOS BSD #10-current July 15, 2007 2
Generated on 2015-04-13 10:26:13 by $MirOS: src/scripts/roff2htm,v 1.80 2015/01/02 13:54:19 tg Exp $
These manual pages and other documentation are copyrighted by their respective writers;
their source is available at our CVSweb,
AnonCVS, and other mirrors. The rest is Copyright © 2002–2015 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.
This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.