MirBSD manpage: od(1)
OD(1) BSD Reference Manual OD(1)
od - octal, decimal, hex, ascii dump
od [-aBbcDdeFfHhIiLlOovXx] [-j skip] [-N length] [-t type_string]
[[+]offset[.][Bb]] file ...
od has been deprecated in favor of hexdump(1).
hexdump(1), if called as od, provides compatibility for the options
described below. It does not provide compatibility for the -s option (see
strings(1)) or the -P, -p, or -w options, nor is compatibility provided
for the ``label'' component of the offset syntax.
The options are as follows:
-a One-byte character display. Display the input offset in oc-
tal, followed by sixteen space-separated, three column,
space-filled, characters of input data per line. Control
characters are printed as their names instead of as C-style
escapes.
-B Same as -o.
-b One-byte octal display. Display the input offset in octal,
followed by sixteen space-separated, three column, zero-
filled, bytes of input data, in octal, per line. This is the
default output style if no other is selected.
-c One-byte character display. Display the input offset in oc-
tal, followed by sixteen space-separated, three column,
space-filled, characters of input data per line. Control
characters are printed as c style escapes, or as three octal
digits, if no c escape exists for the character.
-d Two-byte decimal display. Display the input offset in octal,
followed by eight space-separated, five column, zero-filled,
two-byte units of input data, in unsigned decimal, per line.
-e Eight-byte floating point display. Display the input offset
in octal, followed by two space-separated, twenty-one column,
space filled, eight byte units of input data, in floating
point, per line.
-F Same as -e.
-f Four-byte floating point display. Display the input offset in
octal, followed by four space-separated, 14 column, space
filled, four byte units of input data, in floating point, per
line.
-H Four-byte hex display. Display the input offset in octal,
followed by four space-separated, eight column, zero filled,
four byte units of input data, in hex, per line.
-h Two-byte hex display. Display the input offset in octal, fol-
lowed by eight space-separated, four column, zero filled, two
byte units of input data, in hex, per line.
-I Four-byte decimal display. Display the input offset in octal,
followed by four space-separated, eleven column, space
filled, four byte units of input data, in decimal, per line.
-i Two-byte decimal display. Display the input offset in octal,
followed by eight space-separated, six column, space filled,
two-byte units of input data, in decimal, per line.
-j offset Skip offset bytes from the beginning of the input. By de-
fault, offset is interpreted as a decimal number. With a
leading 0x or 0X, offset is interpreted as a hexadecimal
number, otherwise, with a leading 0, offset is interpreted as
an octal number. Appending the character b, k, or m to offset
causes it to be interpreted as a multiple of 512, 1024, or
1048576, respectively.
-L Same as -I.
-l Same as -I.
-N length Interpret only length bytes of input.
-O Four-byte octal display. Display the input offset in octal,
followed by four space-separated, eleven column, zero-filled,
four-byte units of input data, in octal, per line.
-o Two-byte octal display. Display the input offset in octal,
followed by eight space-separated, six column, zero-filled,
two-byte units of input data, in octal, per line.
-t type_string
Specify one or more output types. The type_string option-
argument must be a string specifying the types to be used
when writing the input data. The string must consist of the
type specification characters:
a selects US-ASCII output, with control characters replaced
with their names instead of as c escape sequences. See also
the _u conversion provided by hexdump(1).
c selects a standard character based conversion. See also the
_c conversion provided by hexdump(1).
f selects the floating point output format. This type charac-
ter can be optionally followed by the characters 4 or F to
specify four byte floating point output, or 8 or L to specify
eight byte floating point output. The default output format
is eight byte floats. See also the e conversion provided by
hexdump(1).
d, o, u, or x select decimal, octal, unsigned decimal, or hex
output respectively. These types can optionally be followed
by C to specify char-sized output, S to specify short-sized
output, I to specify int-sized output, L to specify long-
sized output, 1 to specify one-byte output, 2 to specify two-
byte output, 4 to specify four-byte output, or 8 to specify
eight-byte output. The default output format is in four-byte
quantities. See also the d, o, u, and x conversions provided
by hexdump(1).
-v The -v option causes od to display all input data. Without
the -v option, any number of groups of output lines, which
would be identical to the immediately preceding group of out-
put lines (except for the input offsets), are replaced with a
line comprised of a single asterisk.
-X Same as -H.
-x Same as -h.
For each input file, od sequentially copies the input to standard output,
transforming the data according to the options given. If no options are
specified, the default display is equivalent to specifying the -o option.
od exits 0 on success and >0 if an error occurred.
hexdump(1), strings(1)
A od command appears in Version 1 AT&T UNIX.
This man page was written in February 2001 by Andrew Brown, shortly after
he augmented the deprecated od syntax to include things he felt had been
missing for a long time.
MirBSD #10-current February 9, 2001 2