MirOS Manual: mktemp(1)

MKTEMP(1)                    BSD Reference Manual                    MKTEMP(1)

NAME

     mktemp - make temporary filename (unique)

SYNOPSIS

     mktemp [-dqtu] [-p directory] [template]

DESCRIPTION

     The mktemp utility takes the given filename template and overwrites a
     portion of it to create a unique filename. The template may be any
     filename with some number of 'Xs' appended to it, for example
     /tmp/tfile.XXXXXXXXXX. If no template is specified a default of
     tmp.XXXXXXXXXX is used and the -t flag is implied (see below).

     The trailing 'Xs' are replaced with a combination of the current process
     number and random letters. The name chosen depends both on the number of
     'Xs' in the template and the number of collisions with pre-existing
     files. The number of unique filenames mktemp can return depends on the
     number of 'Xs' provided; ten 'Xs' will result in mktemp testing roughly
     26 ** 10 combinations.

     If mktemp can successfully generate a unique filename, the file (or
     directory) is created with file permissions such that it is only readable
     and writable by its owner (unless the -u flag is given) and the filename
     is printed to standard output.

     mktemp is provided to allow shell scripts to safely use temporary files.
     Traditionally, many shell scripts take the name of the program with the
     PID as a suffix and use that as a temporary filename. This kind of naming
     scheme is predictable and the race condition it creates is easy for an
     attacker to win. A safer, though still inferior approach is to make a
     temporary directory using the same naming scheme. While this does allow
     one to guarantee that a temporary file will not be subverted, it still
     allows a simple denial of service attack. For these reasons it is sug-
     gested that mktemp be used instead.

     The options are as follows:

     -d      Make a directory instead of a file.

     -p directory
             Use the specified directory as a prefix when generating the tem-
             porary filename. The directory will be overridden by the user's
             TMPDIR environment variable if it is set. This option implies the
             -t flag (see below).

     -q      Fail silently if an error occurs. This is useful if a script does
             not want error output to go to standard error.

     -t      Generate a path rooted in a temporary directory. This directory
             is chosen as follows:

             •   If the user's TMPDIR environment variable is set, the direc-
                 tory contained therein is used.

             •   Otherwise, if the -p flag was given the specified directory
                 is used.

             •   If none of the above apply, /tmp is used.

             In this mode, the template (if specified) should be a directory
             component (as opposed to a full path) and thus should not contain
             any forward slashes.

     -u      Operate in "unsafe" mode. The temp file will be unlinked before
             mktemp exits. This is slightly better than mktemp(3) but still
             introduces a race condition. Use of this option is not en-
             couraged.

     The mktemp utility exits with a value of 0 on success or 1 on failure.

ENVIRONMENT

     TMPDIR  directory in which to place the temporary file when in -t mode

EXAMPLES

     The following sh(1) fragment illustrates a simple use of mktemp where the
     script should quit if it cannot get a safe temporary file.

           TMPFILE=`mktemp /tmp/example.XXXXXXXXXX` || exit 1
           echo "program output" >> $TMPFILE

     The same fragment with support for a user's TMPDIR environment variable
     can be written as follows.

           TMPFILE=`mktemp -t example.XXXXXXXXXX` || exit 1
           echo "program output" >> $TMPFILE

     This can be further simplified if we don't care about the actual name of
     the temporary file. In this case the -t flag is implied.

           TMPFILE=`mktemp` || exit 1
           echo "program output" >> $TMPFILE

     In some cases, it may be desirable to use a default temporary directory
     other than /tmp. In this example the temporary file will be created in
     /extra/tmp unless the user's TMPDIR environment variable specifies other-
     wise.

           TMPFILE=`mktemp -p /extra/tmp example.XXXXXXXXXX` || exit 1
           echo "program output" >> $TMPFILE

     In some cases, we want the script to catch the error. For instance, if we
     attempt to create two temporary files and the second one fails we need to
     remove the first before exiting.

           TMP1=`mktemp -t example.1.XXXXXXXXXX` || exit 1
           TMP2=`mktemp -t example.2.XXXXXXXXXX`
           if [ $? -ne 0 ]; then
                   rm -f $TMP1
                   exit 1
           fi

     Or perhaps you don't want to exit if mktemp is unable to create the file.
     In this case you can protect that part of the script thusly.

           TMPFILE=`mktemp -q -t example.XXXXXXXXXX` && {
                   # Safe to use $TMPFILE in this block
                   echo data > $TMPFILE
                   ...
                   rm -f $TMPFILE
           }

SEE ALSO

     mkdtemp(3), mkstemp(3), mktemp(3)

HISTORY

     The mktemp utility appeared in OpenBSD 2.1.

MirOS BSD #10-current         September 30, 2001                             1

Generated on 2014-07-04 21:17:45 by $MirOS: src/scripts/roff2htm,v 1.79 2014/02/10 00:36:11 tg Exp $

These manual pages and other documentation are copyrighted by their respective writers; their source is available at our CVSweb, AnonCVS, and other mirrors. The rest is Copyright © 2002‒2014 The MirOS Project, Germany.
This product includes material provided by Thorsten Glaser.

This manual page’s HTML representation is supposed to be valid XHTML/1.1; if not, please send a bug report – diffs preferred.