XFree86(1) UNIX Programmer's Manual XFree86(1)
NAME
XFree86 - X11R6 X server
SYNOPSIS
XFree86 [:display] [option ...]
DESCRIPTION
XFree86 is a full featured X server that was originally
designed for UNIX and UNIX-like operating systems running on
Intel x86 hardware. It now runs on a wider range of
hardware and OS platforms.
This work was originally derived from X386 1.2 by Thomas
Roell which was contributed to X11R5 by Snitily Graphics
Consulting Service. The XFree86 server architecture was
redesigned for the 4.0 release, and it includes among many
other things a loadable module system derived from code
donated by Metro Link, Inc. The current XFree86 release is
compatible with X11R6.6.
PLATFORMS
XFree86 operates under a wide range of operating systems and
hardware platforms. The Intel x86 (IA32) architecture is the
most widely supported hardware platform. Other hardware
platforms include Compaq Alpha, Intel IA64, SPARC and
PowerPC. The most widely supported operating systems are
the free/OpenSource UNIX-like systems such as Linux,
FreeBSD, NetBSD and OpenBSD. Commercial UNIX operating sys-
tems such as Solaris (x86) and UnixWare are also supported.
Other supported operating systems include LynxOS, and GNU
Hurd. Darwin and Mac OS X are supported with the XDarwin(1)
X server. Win32/Cygwin is supported with the XWin X server.
NETWORK CONNECTIONS
XFree86 supports connections made using the following reli-
able byte-streams:
Local
On most platforms, the "Local" connection type is a
UNIX-domain socket. On some System V platforms, the
"local" connection types also include STREAMS pipes,
named pipes, and some other mechanisms.
TCPIP
XFree86 listens on port 6000+n, where n is the display
number. This connection type can be disabled with the
-nolisten option (see the Xserver(1) man page for
details).
ENVIRONMENT VARIABLES
For operating systems that support local connections other
than Unix Domain sockets (SVR3 and SVR4), there is a
XFree86 Version 4.5.0 1
XFree86(1) UNIX Programmer's Manual XFree86(1)
compiled-in list specifying the order in which local connec-
tions should be attempted. This list can be overridden by
the XLOCAL environment variable described below. If the
display name indicates a best-choice connection should be
made (e.g. :0.0), each connection mechanism is tried until a
connection succeeds or no more mechanisms are available.
Note: for these OSs, the Unix Domain socket connection is
treated differently from the other local connection types.
To use it the connection must be made to unix:0.0.
The XLOCAL environment variable should contain a list of one
more more of the following:
NAMED
PTS
SCO
ISC
which represent SVR4 Named Streams pipe, Old-style USL
Streams pipe, SCO XSight Streams pipe, and ISC Streams pipe,
respectively. You can select a single mechanism (e.g.
XLOCAL=NAMED), or an ordered list (e.g.
XLOCAL="NAMED:PTS:SCO"). his variable overrides the
compiled-in defaults. For SVR4 it is recommended that NAMED
be the first preference connection. The default setting is
PTS:NAMED:ISC:SCO.
To globally override the compiled-in defaults, you should
define (and export if using sh or ksh) XLOCAL globally. If
you use startx(1) or xinit(1), the definition should be at
the top of your .xinitrc file. If you use xdm(1), the
definitions should be early on in the
/usr/X11R6/lib/X11/xdm/Xsession script.
OPTIONS
XFree86 supports several mechanisms for supplying/obtaining
configuration and run-time parameters: command line options,
environment variables, the XF86Config(5) configuration file,
auto-detection, and fallback defaults. When the same infor-
mation is supplied in more than one way, the highest pre-
cedence mechanism is used. The list of mechanisms is
ordered from highest precedence to lowest. Note that not
all parameters can be supplied via all methods. The avail-
able command line options and environment variables (and
some defaults) are described here and in the Xserver(1)
manual page. Most configuration file parameters, with their
defaults, are described in the XF86Config(5) manual page.
Driver and module specific configuration parameters are
described in the relevant driver or module manual page.
Starting with version 4.4, XFree86 has support for generat-
ing a usable configuration at run-time when no XF86Config(5)
XFree86 Version 4.5.0 2
XFree86(1) UNIX Programmer's Manual XFree86(1)
configuration file is provided. The initial version of this
automatic configuration support is targeted at the most
popular hardware and software platforms supported by
XFree86. Some details about how this works can be found in
the CONFIGURATION section below and in the getconfig(1)
manual page.
In addition to the normal server options described in the
Xserver(1) manual page, XFree86 accepts the following com-
mand line switches:
vtXX XX specifies the Virtual Terminal device number
which XFree86 will use. Without this option,
XFree86 will pick the first available Virtual Termi-
nal that it can locate. This option applies only to
platforms such as Linux, BSD, SVR3 and SVR4, that
have virtual terminal support.
-allowMouseOpenFail
Allow the server to start up even if the mouse dev-
ice can't be opened or initialised. This is
equivalent to the AllowMouseOpenFail XF86Config(5)
file option.
-allowNonLocalModInDev
Allow changes to keyboard and mouse settings from
non-local clients. By default, connections from
non-local clients are not allowed to do this. This
is equivalent to the AllowNonLocalModInDev
XF86Config(5) file option.
-allowNonLocalXvidtune
Make the VidMode extension available to remote
clients. This allows the xvidtune client to connect
from another host. This is equivalent to the
AllowNonLocalXvidtune XF86Config(5) file option. By
default non-local connections are not allowed.
-appendauto
Append the automatic XFree86 server configuration
data to an existing configuration file. By default
this is only done when an existing configuration
file does not contain any ServerLayout sections or
any Screen sections. This can be useful for provid-
ing configuration details for things not currently
handled by the automatic configuration mechanism,
such as input devices, font paths, etc.
-autoconfig
Use automatic XFree86 server configuration, even if
a configuration file is available. By default
automatic configuration is only used when a
XFree86 Version 4.5.0 3
XFree86(1) UNIX Programmer's Manual XFree86(1)
configuration file cannot be found.
-bgamma value
Set the blue gamma correction. value must be between
0.1 and 10. The default is 1.0. Not all drivers
support this. See also the -gamma, -rgamma, and
-ggamma options.
-bpp n No longer supported. Use -depth to set the color
depth, and use -fbbpp if you really need to force a
non-default framebuffer (hardware) pixel format.
-configure
When this option is specified, the XFree86 server
loads all video driver modules, probes for available
hardware, and writes out an initial XF86Config(5)
file based on what was detected. This option
currently has some problems on some platforms, but
in most cases it is a good way to bootstrap the con-
figuration process. This option is only available
when the server is run as root (i.e, with real-uid
0).
-crt /dev/ttyXX
SCO only. This is the same as the vt option, and is
provided for compatibility with the native SCO X
server.
-depth n
Sets the default color depth. Legal values are 1,
4, 8, 15, 16, and 24. Not all drivers support all
values.
-disableModInDev
Disable dynamic modification of input device set-
tings. This is equivalent to the DisableModInDev
XF86Config(5) file option.
-disableVidMode
Disable the the parts of the VidMode extension (used
by the xvidtune client) that can be used to change
the video modes. This is equivalent to the Disa-
bleVidModeExtension XF86Config(5) file option.
-fbbpp n
Sets the number of framebuffer bits per pixel. You
should only set this if you're sure it's necessary;
normally the server can deduce the correct value
from -depth above. Useful if you want to run a
depth 24 configuration with a 24 bpp framebuffer
rather than the (possibly default) 32 bpp frame-
buffer (or vice versa). Legal values are 1, 8, 16,
XFree86 Version 4.5.0 4
XFree86(1) UNIX Programmer's Manual XFree86(1)
24, 32. Not all drivers support all values.
-flipPixels
Swap the default values for the black and white pix-
els.
-gamma value
Set the gamma correction. value must be between 0.1
and 10. The default is 1.0. This value is applied
equally to the R, G and B values. Those values can
be set independently with the -rgamma, -bgamma, and
-ggamma options. Not all drivers support this.
-ggamma value
Set the green gamma correction. value must be
between 0.1 and 10. The default is 1.0. Not all
drivers support this. See also the -gamma, -rgamma,
and -bgamma options.
-ignoreABI
The XFree86 server checks the ABI revision levels of
each module that it loads. It will normally refuse
to load modules with ABI revisions that are newer
than the server's. This is because such modules
might use interfaces that the server does not have.
When this option is specified, mismatches like this
are downgraded from fatal errors to warnings. This
option should be used with care.
-keepPriv
Prevent the server from revoking its privileges. If
this option is not specified, the X server will
change its uid and gid either to those of the user
who started it or to the _x11 user and group if it
was started by the super-user, after performing the
initialisations that require super-user privileges.
Only root can use this option.
-keeptty
Prevent the server from detaching its initial con-
trolling terminal. This option is only useful when
debugging the server. Not all platforms support (or
can use) this option.
-keyboard keyboard-name
Use the XF86Config(5) file InputDevice section
called keyboard-name as the core keyboard. This
option is ignored when the ServerLayout section
specifies a core keyboard. In the absence of both a
ServerLayout section and this option, the first
relevant InputDevice section is used for the core
keyboard.
XFree86 Version 4.5.0 5
XFree86(1) UNIX Programmer's Manual XFree86(1)
-layout layout-name
Use the XF86Config(5) file ServerLayout section
called layout-name. By default the first ServerLay-
out section is used.
-logfile filename
Use the file called filename as the XFree86 server
log file. The default log file is
/var/log/XFree86.n.log on most platforms, where n is
the display number of the XFree86 server. The
default may be in a different directory on some
platforms. This option is only available when the
server is run as root (i.e, with real-uid 0).
-logverbose [n]
Sets the verbosity level for information printed to
the XFree86 server log file. If the n value isn't
supplied, each occurrence of this option increments
the log file verbosity level. When the n value is
supplied, the log file verbosity level is set to
that value. The default log file verbosity level is
3.
-modulepath searchpath
Set the module search path to searchpath. searchpath
is a comma separated list of directories to search
for XFree86 server modules. This option is only
available when the server is run as root (i.e, with
real-uid 0).
-noappendauto
Disable appending the automatic XFree86 server con-
figuration to a partial static configuration.
-nosilk Disable Silken Mouse support.
-pixmap24
Set the internal pixmap format for depth 24 pixmaps
to 24 bits per pixel. The default is usually 32 bits
per pixel. There is normally little reason to use
this option. Some client applications don't like
this pixmap format, even though it is a perfectly
legal format. This is equivalent to the Pixmap
XF86Config(5) file option.
-pixmap32
Set the internal pixmap format for depth 24 pixmaps
to 32 bits per pixel. This is usually the default.
This is equivalent to the Pixmap XF86Config(5) file
option.
-pointer pointer-name
XFree86 Version 4.5.0 6
XFree86(1) UNIX Programmer's Manual XFree86(1)
Use the XF86Config(5) file InputDevice section
called pointer-name as the core pointer. This
option is ignored when the ServerLayout section
specifies a core pointer. In the absence of both a
ServerLayout section and this option, the first
relevant InputDevice section is used for the core
pointer.
-probeonly
Causes the server to exit after the device probing
stage. The XF86Config(5) file is still used when
this option is given, so information that can be
auto-detected should be commented out.
-quiet Suppress most informational messages at startup.
The verbosity level is set to zero.
-rgamma value
Set the red gamma correction. value must be between
0.1 and 10. The default is 1.0. Not all drivers
support this. See also the -gamma, -bgamma, and
-ggamma options.
-scanpci
When this option is specified, the XFree86 server
scans the PCI bus, and prints out some information
about each device that was detected. See also
scanpci(1) and pcitweak(1).
-screen screen-name
Use the XF86Config(5) file Screen section called
screen-name. By default the screens referenced by
the default ServerLayout section are used, or the
first Screen section when there are no ServerLayout
sections.
-showconfig
This is the same as the -version option, and is
included for compatibility reasons. It may be
removed in a future release, so the -version option
should be used instead.
-weight nnn
Set RGB weighting at 16 bpp. The default is 565.
This applies only to those drivers which support 16
bpp.
-verbose [n]
Sets the verbosity level for information printed on
stderr. If the n value isn't supplied, each
occurrence of this option increments the verbosity
level. When the n value is supplied, the verbosity
XFree86 Version 4.5.0 7
XFree86(1) UNIX Programmer's Manual XFree86(1)
level is set to that value. The default verbosity
level is 0.
-version
Print out the server version, patchlevel, release
date, the operating system/platform it was built on,
and whether it includes module loader support.
-xf86config file
Read the server configuration from file. This option
will work for any file when the server is run as
root (i.e, with real-uid 0), or for files relative
to a directory in the config search path for all
other users.
KEYBOARD
The XFree86 server is normally configured to recognize vari-
ous special combinations of key presses that instruct the
server to perform some action, rather than just sending the
key press event to a client application. The default XKEY-
BOARD keymap defines the key combinations listed below. The
server also has these key combinations builtin to its event
handler for cases where the XKEYBOARD extension is not being
used. When using the XKEYBOARD extension, which key combi-
nations perform which actions is completely configurable.
For more information about when the builtin event handler is
used to recognize the special key combinations, see the
documentation on the HandleSpecialKeys option in the
XF86Config(5) man page.
The special combinations of key presses recognized directly
by XFree86 are:
Ctrl+Alt+Backspace
Immediately kills the server -- no questions asked.
This can be disabled with the DontZap XF86Config(5)
file option.
Ctrl+Alt+Keypad-Plus
Change video mode to next one specified in the con-
figuration file. This can be disabled with the
DontZoom XF86Config(5) file option.
Ctrl+Alt+Keypad-Minus
Change video mode to previous one specified in the
configuration file. This can be disabled with the
DontZoom XF86Config(5) file option.
Ctrl+Alt+Keypad-Multiply
Not treated specially by default. If the
AllowClosedownGrabs XF86Config(5) file option is
XFree86 Version 4.5.0 8
XFree86(1) UNIX Programmer's Manual XFree86(1)
specified, this key sequence kills clients with an
active keyboard or mouse grab as well as killing any
application that may have locked the server, nor-
mally using the XGrabServer(3) Xlib function.
Ctrl+Alt+Keypad-Divide
Not treated specially by default. If the AllowDeac-
tivateGrabs XF86Config(5) file option is specified,
this key sequence deactivates any active keyboard
and mouse grabs.
Ctrl+Alt+F1...F12
For BSD and Linux systems with virtual terminal sup-
port, these keystroke combinations are used to
switch to virtual terminals 1 through 12, respec-
tively. This can be disabled with the DontVTSwitch
XF86Config(5) file option.
CONFIGURATION
XFree86 typically uses a configuration file called
XF86Config for its initial setup. Refer to the XF86Config(5)
manual page for information about the format of this file.
Starting with version 4.4, XFree86 has a mechanism for
automatically generating a built-in configuration at run-
time when no XF86Config file is present. The current ver-
sion of this automatic configuration mechanism works in
three ways.
The first is via enhancements that have made many components
of the XF86Config file optional. This means that informa-
tion that can be probed or reasonably deduced doesn't need
to be specified explicitly, greatly reducing the amount of
built-in configuration information that needs to be gen-
erated at run-time.
The second is to use an external utility called getconfig(1),
when available, to use meta-configuration informa-
tion to generate a suitable configuration for the primary
video device. The meta-configuration information can be
updated to allow an existing installation to get the best
out of new hardware or to work around bugs that are found
post-release.
The third is to have "safe" fallbacks for most configuration
information. This maximises the likelihood that the XFree86
server will start up in some usable configuration even when
information about the specific hardware is not available.
The automatic configuration support for XFree86 is work in
progress. It is currently aimed at the most popular hardware
and software platforms supported by XFree86. Enhancements
XFree86 Version 4.5.0 9
XFree86(1) UNIX Programmer's Manual XFree86(1)
are planned for future releases.
FILES
The XFree86 server config file can be found in a range of
locations. These are documented fully in the XF86Config(5)
manual page. The most commonly used locations are shown
here.
/etc/X11/XF86Config Server configuration file.
/etc/X11/XF86Config-4 Server configuration file.
/etc/XF86Config Server configuration file.
/usr/X11R6/etc/XF86Config Server configuration file.
/usr/X11R6/lib/X11/XF86Config Server configuration file.
/var/log/XFree86.n.log Server log file for display n.
/usr/X11R6/bin/* Client binaries.
/usr/X11R6/include/* Header files.
/usr/X11R6/lib/* Libraries.
/usr/X11R6/lib/X11/fonts/* Fonts.
/usr/X11R6/lib/X11/rgb.txt Color names to RGB mapping.
/usr/X11R6/lib/X11/XErrorDB Client error message database.
/usr/X11R6/lib/X11/app-defaults/*
Client resource specifica-
tions.
/usr/X11R6/man/man?/* Manual pages.
/etc/Xn.hosts Initial access control list
for display n.
SEE ALSO
X(7), Xserver(1), xdm(1), xinit(1), XF86Config(5),
xf86config(1), xf86cfg(1), xvidtune(1), apm(4), ati(4),
chips(4), cirrus(4), cyrix(4), fbdev(4), glide(4), glint(4),
i128(4), i740(4), i810(4), imstt(4), mga(4), neomagic(4),
nsc(4), nv(4), r128(4), rendition(4), s3virge(4), siliconmotion(4),
sis(4), sunbw2(4), suncg14(4), suncg3(4),
suncg6(4), sunffb(4), sunleo(4), suntcx(4), tdfx(4), tga(4),
trident(4), tseng(4), v4l(4), vesa(4), vga(4), vmware(4),
README <http://www.xfree86.org/current/README.html>,
RELNOTES <http://www.xfree86.org/current/RELNOTES.html>,
XFree86 Version 4.5.0 10
XFree86(1) UNIX Programmer's Manual XFree86(1)
README.mouse <http://www.xfree86.org/current/mouse.html>,
README.DRI <http://www.xfree86.org/current/DRI.html>,
Install <http://www.xfree86.org/current/Install.html>.
AUTHORS
XFree86 has many contributors world wide. The names of most
of them can be found in the documentation, CHANGELOG files
in the source tree, and in the actual source code. The
names of the contributors to the current release can be
found in the release notes
<http://www.xfree86.org/current/RELNOTES.html>.
XFree86 was originally based on X386 1.2 by Thomas Roell,
which was contributed to the then X Consortium's X11R5 dis-
tribution by SGCS.
The project that became XFree86 was originally founded in
1992 by David Dawes, Glenn Lai, Jim Tsillas and David Wexel-
blat.
XFree86 was later integrated in the then X Consortium's
X11R6 release by a group of dedicated XFree86 developers,
including the following:
Stuart Anderson, Doug Anson, Gertjan Akkerman, Mike
Bernson, Robin Cutshaw, David Dawes, Marc Evans, Pascal
Haible, Matthieu Herrb, Dirk Hohndel, David Holland,
Alan Hourihane, Jeffrey Hsu, Glenn Lai, Ted Lemon, Rich
Murphey, Hans Nasten, Mark Snitily, Randy Terbush, Jon
Tombs, Kees Verstoep, Paul Vixie, Mark Weaver, David
Wexelblat, Philip Wheatley, Thomas Wolfram, Orest
Zborowski.
Contributors to XFree86 4.4.0 include:
Roi a Torkilsheyggi, Dave Airlie, Andrew Aitchison,
Marco Antonio Alvarez, Alexandr Andreev, Jack Angel,
Eric Anholt, Ani, Juuso berg, Sergey Babkin, Alexey Baj,
Bang Jun-Young, Uberto Barbini, Kyle Bateman, Matthew W.
S. Bell, Vano Beridze, Hiroyuki Bessho, Andrew Bevitt,
Christian Biere, Martin Birgmeier, Jakub Bogusz, Le Hong
Boi, Paul Bolle, Charl Botha, Stanislav Brabec, Eric
Branlund, Rob Braun, Peter Breitenlohner, Michael
Breuer, Kevin Brosius, Frederick Bruckman, Oswald Bud-
denhagen, Nilgn Belma Bugner, Julian Cable, Yukun Chen,
Ping Cheng, Juliusz Chroboczek, Fred Clift, Alan
Coopersmith, Martin Costabel, Alan Cox, Michel Dnzer,
David Dawes, Leif Delgass, Richard Dengler, John Dennis,
Thomas Dickey, Randy Dunlap, Chris Edgington, Paul
Eggert, Paul Elliott, Emmanuel, Visanu Euarchukiati,
Mike Fabian, Rik Faith, Brian Feldman, Wu Jian Feng,
XFree86 Version 4.5.0 11
XFree86(1) UNIX Programmer's Manual XFree86(1)
Kevin P. Fleming, Jose Fonseca, Hugues Fournier, Miguel
Freitas, Quentin Garnier, Brre Gaup, Michael Geddes,
Frank Giessler, Hansruedi Glauser, Wolfram Gloger, Alex-
ander Gottwald, Guido Guenther, Ralf Habacker, Bruno
Haible, Lindsay Haigh, John Harper, James Harris, Mike
A. Harris, Bryan W. Headley, John Heasley, Thomas
Hellstrm, Matthieu Herrb, Jonathan Hough, Alan
Hourihane, Joel Ray Holveck, Harold L Hunt II, Ricardo
Y. Igarashi, Mutsumi ISHIKAWA , Tsuyoshi ITO, Kean
Johnston, Nicolas JOLY, Phil Jones, Roman Kagan, Theppi-
tak Karoonboonyanan, Etsushi Kato, Koike Kazuhiko, Aidan
Kehoe, Juergen Keil, Andreas Kies, Thomas Klausner,
Mario Klebsch, Egmont Koblinger, Vlatko Kosturjak,
Kusanagi Kouichi, Mel Kravitz, Peter Kunzmann, Nick
Kurshev, Mashrab Kuvatov, Marc La France, Radics Laszlo,
Zarick Lau, Nolan Leake, Michel Lespinasse, Noah Levitt,
Dave Love, H.J. Lu, Lubos Lunak, Sven Luther, Torrey T.
Lyons, Calum Mackay, Paul Mackerras, Roland Mainz, Kevin
Martin, Michal Maruska, Kensuke Matsuzaki, maxim,
Stephen McCamant, Ferris McCormick, Luke Mewburn, Nicho-
las Miell, Robert Millan, Hisashi MIYASHITA, Gregory
Mokhin, Patrik Montgomery, Joe Moss, Josselin Mouette,
Frank Murphy, Reiko Nakajima, Paul Nasrat, Dan Nelson,
Bastien Nocera, Alexandre Oliva, Hideki ONO, Peter
Osterlund, Sergey V. Oudaltsov, Samus Ciardhuin, Bob
Paauwe, Paul Pacheco, Tom Pala, Ivan Pascal, T. M.
Pederson, Earle F. Philhower III, Nils Philippsen,
Manfred Pohler, Alexander Pohoyda, Alain Poirier, Arnaud
Quette, Jim Radford, Dale Rahn, Lucas Correia Villa
Real, Ren Rebe, Tyler Retzlaff, Sebastian Rittau, Tim
Roberts, Alastair M. Robinson, Branden Robinson, Daniel
Rock, Ian Romanick, Bernhard Rosenkraenzer, Mns Rullgrd,
Andriy Rysin, Supphachoke Santiwichaya, Pablo Saratxaga,
Matthias Scheler, Jens Schweikhardt, Danilo Segan, Shan-
tonu Sen, Stas Sergeev, Jungshik Shin, Nikola Smolenski,
Andreas Stenglein, Paul Stewart, Alexander Stohr, Alan
Strohm, Will Styles, James Su, Mike Sulivan, Ville Syr-
jala, Slava Sysoltsev, Akira TAGOH, Toshimitsu Tanaka,
Akira Taniguchi, Owen Taylor, Neil Terry, Jonathan Tham-
bidurai, John Tillman, Adam Tlalka, Linus Torvalds,
Christian Tosta, Warren Turkal, Stephen J. Turnbull, Ted
Unangst, Mike Urban, Simon Vallet, Thuraiappah
Vaseeharan, Luc Verhaegen, Yann Vernier, Michail Vidias-
sov, Sebastiano Vigna, Mark Vojkovich, Stephane Voltz,
Boris Weissman, Keith Whitwell, Thomas Winischhofer,
Eric Wittry, Kim Woelders, Roy Wood, Jason L. Wright,
Joerg Wunsch, Chisato Yamauchi, Hui Yu.
Contributors to XFree86 4.5.0 include:
Szilveszter Adam, Tim Adye, Taneem Ahmed, Andrew
Aitchison, Raoul Arranz, Zaeem Arshad, Dwayne Bailey,
XFree86 Version 4.5.0 12
XFree86(1) UNIX Programmer's Manual XFree86(1)
Ilyas Bakirov, Denis Barbier, Kyle Bateman, J. Scott
Berg, Thomas Biege, Dmitry Bolkhovityanov, H Merijn
Brand, Peter Breitenlohner, Benjamin Burke, Dale L
Busacker, busmanus, Julian Cable, Mike Castle, David M.
Clay, Philip Clayton, Alan Coopersmith, Ricardo Cruz,
Michel Dnzer, J. D. Darling, David Dawes, Michael Dawes,
Rafael vila de Espndola, Rick De Laet, Josip Deanovic,
Angelus Dei, Laurent Deniel, Thomas Dickey, Stefan
Dirsch, Charles Dobson, DRI Project, Emmanuel Dreyfus,
Boris Dusek, Georgina O. Economou, Egbert Eich, Bernd
Ernesti, Chris Evans, Rik Faith, Adrian Fiechter,
Matthew Fischer, FreeType Team, Terry R. Frienrichsen,
Christopher Fynn, Hubert Gburzynski, Nicolas George,
Frank Giessler, Fred Gleason, Dmitry Golubev, Alexander
Gottwald, Herbert Graeber, Miroslav Halas, John Harper,
Harshula, John Heasley, Matthieu Herrb, David Holl, Alex
Holland, Peng Hongbo, Alan Hourihane, Harold L Hunt II,
Alan Iwi, Timur Jamakeev, Paul Jarc, Kean Johnston,
Nicolas Joly, Mark Kandianis, Kaleb Keithley, Chamath
Keppitiyagama, Jung-uk Kim, Satoshi Kimura, Michael
Knudsen, Vlatko Kosturjak, Alexei Kosut, Anton
Kovalenko, Joachim Kuebart, Marc La France, David
Laight, Zarick Lau, Pierre Lalet, Michael Lampe, Lanka
Linux User Group, Nolan Leake, Werner Lemberg, Dejan
Lesjak, Noah Levitt, Greg Lewis, Bernhard R Link, Jonas
Lund, S. Lussos, Torrey T. Lyons, Roland Mainz, N Marci,
Kevin Martin, Stephen McCamant, Mesa Developers, Luke
Mewburn, Petr Mladek, Bram Moolenaar, Steve Murphy,
Ishikawa MUTSUMI, Radu Octavian, Lee Olsen, Greg Parker,
Ivan Pascal, Alexander E. Patrakov, Mike Pechkin, Sos
Pter, Zvezdan Petkovic, Alexander Pohoyda, Xie Qian,
Bill Randle, Adam J. Richter, Tim Roberts, Bernhard
Rosenkraenzer, Andreas Rden, Steve Rumble, Oleg Safiul-
lin, Ty Sarna, Leo Savernik, Barry Scott, Shantonu Sen,
Yu Shao, Andreas Schwab, Matthias Scheler, Dan Shearer,
Michael Shell, Paul Shupak, Alexander Stohr, Marius
Strobl, Mikko Markus Torni, Jess Thrysoee, Izumi Tsut-
sui, Tungsten Graphics, Ryan Underwood, Tristan Van Ber-
kom, Michael van Elst, Phillip Vandry, Roman Vasylyev,
Luc Verhaegen, Rodion Vshevtsov, Mark Vojkovich, Edi
Werner, Keith Whitwell, Scot Wilcoxon, Dave Williss,
Thomas Winischhofer, Kuang-che Wu, X-Oz Technologies,
Chisato Yamauchi, Michael Yaroslavtsev, David Yerger, Su
Yong, Hui Yu, Sagi Zeevi, Christian Zietz
XFree86 source is available from the FTP server
<ftp://ftp.XFree86.org/pub/XFree86/>, and from the XFree86
CVS server <http://www.xfree86.org/cvs/>. Documentation and
other information can be found from the XFree86 web site
<http://www.xfree86.org/>.
XFree86 Version 4.5.0 13
XFree86(1) UNIX Programmer's Manual XFree86(1)
LEGAL
XFree86 is copyright software, provided under licenses that
permit modification and redistribution in source and binary
form without fee. Portions of XFree86 are copyright by The
XFree86 Project, Inc. and numerous authors and contributors
from around the world. Licensing information can be found
at <http://www.xfree86.org/current/LICENSE.html>. Refer to
the source code for specific copyright notices.
XFree86(R) is a registered trademark of The XFree86 Project,
Inc.
XFree86 Version 4.5.0 14